首页 文章 精选 留言 我的

CentOS 7.4搭建Kubernetes 1.8.5集群

2017-11-11 523

环境介绍

角色 操作系统 IP 主机名 Docker版本
master,node CentOS 7.4 192.168.0.210 node210 17.11.0-ce
node CentOS 7.4 192.168.0.211 node211 17.11.0-ce
node CentOS 7.4 192.168.0.212 node212 17.11.0-ce

1.基础环境配置(所有服务器执行)
a.SELinux关闭

sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
setenforce 0

b.Docker安装

curl -sSL https://get.docker.com/ | sh

c.配置国内Docker镜像加速器

curl -sSL https://get.daocloud.io/daotools/set_mirror.sh | sh -s http://e2a6d434.m.daocloud.io

d.开启Docker开机自动启动

systemctl enable docker.service
systemctl restart docker

2.kubernetes证书准备(master执行)
a.为将文件复制到Node节点，节省部署时间，我这里做ssh信任免密复制

ssh-genkey -t rsa
ssh-copy-id 192.168.0.211
ssh-copy-id 192.168.0.212

b.下载证书生成工具

yum -y install wget
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
chmod +x cfssl_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl

wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
chmod +x cfssljson_linux-amd64
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson

wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl-certinfo_linux-amd64
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

c.CA证书制作
#目录准备

mkdir /root/ssl
cd /root/ssl

#创建CA证书配置
vim ca-config.json

{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}

#创建CA证书请求文件
vim ca-csr.json

{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "JIANGXI",
      "L": "NANCHANG",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

#生成CA证书和私钥
cfssl gencert -initca ca-csr.json | cfssljson -bare ca

#创建kubernetes证书签名请求
vim kubernetes-csr.json

{
    "CN": "kubernetes",
    "hosts": [
      "127.0.0.1",
      "192.168.0.210",      #修改成自己主机的IP
      "192.168.0.211",      #修改成自己主机的IP
      "192.168.0.212",      #修改成自己主机的IP
      "10.254.0.1",
      "kubernetes",
      "node210",      #修改成自己主机的主机名
      "node211",      #修改成自己主机的主机名
      "node212",      #修改成自己主机的主机名
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "JIANGXI",
            "L": "JIANGXI",
            "O": "k8s",
            "OU": "System"
        }
    ]
}

#生成kubernetes证书及私钥
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes

#创建admin证书签名请求
vim admin-csr.json

{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "JIANGXI",
      "L": "JIANGXI",
      "O": "system:masters",
      "OU": "System"
    }
  ]
}

#生成admin证书及私钥
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin

#创建 kube-proxy 证书签名请求
vim kube-proxy-csr.json

{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "JIANGXI",
      "L": "JIANGXI",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

#生成证书及私钥
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

#分发证书

mkdir -p /etc/kubernetes/ssl
cp -r *.pem /etc/kubernetes/ssl

cd /etc
scp -r kubernetes/ 192.168.0.211:/etc/
scp -r kubernetes/ 192.168.0.212:/etc/

3.etcd集群安装及配置
a.下载etcd，并分发至节点

wget https://github.com/coreos/etcd/releases/download/v3.2.11/etcd-v3.2.11-linux-amd64.tar.gz
tar zxf etcd-v3.2.11-linux-amd64.tar.gz
mv etcd-v3.2.11-linux-amd64/etcd* /usr/local/bin
scp -r /usr/local/bin/etc* 192.168.0.211:/usr/local/bin/
scp -r /usr/local/bin/etc* 192.168.0.212:/usr/local/bin/

b.创建etcd服务启动文件
vim /usr/lib/systemd/system/etcd.service

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=-/etc/etcd/etcd.conf
ExecStart=/usr/local/bin/etcd \
  --name ${ETCD_NAME} \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  --peer-cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --peer-key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  --trusted-ca-file=/etc/kubernetes/ssl/ca.pem \
  --peer-trusted-ca-file=/etc/kubernetes/ssl/ca.pem \
  --initial-advertise-peer-urls ${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
  --listen-peer-urls ${ETCD_LISTEN_PEER_URLS} \
  --listen-client-urls ${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
  --advertise-client-urls ${ETCD_ADVERTISE_CLIENT_URLS} \
  --initial-cluster-token ${ETCD_INITIAL_CLUSTER_TOKEN} \
  --initial-cluster infra1=https://192.168.0.210:2380,infra2=https://192.168.0.211:2380,infra3=https://192.168.0.212:2380 \
  --initial-cluster-state new \
  --data-dir=${ETCD_DATA_DIR}
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

c.创建必要的目录

mkdir -p /var/lib/etcd/
mkdir /etc/etcd

d.编辑etcd的配置文件
vim /etc/etcd/etcd.conf
node210的配置文件/etc/etcd/etcd.conf为

# [member]
ETCD_NAME=infra1
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.210:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.210:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.210:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.210:2379"

node211的配置文件/etc/etcd/etcd.conf为

# [member]
ETCD_NAME=infra2
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.211:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.211:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.211:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.211:2379"

node212的配置文件/etc/etcd/etcd.conf为

# [member]
ETCD_NAME=infra3
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.212:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.212:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.212:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.212:2379"

#在所有节点执行，启动etcd

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd
systemctl status etcd

如果报错，就需要查看/var/log/messages文件进行排错

e.测试集群是否正常

验证ETCD是否成功启动
etcdctl \
  --ca-file=/etc/kubernetes/ssl/ca.pem \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  cluster-health

4.配置kubernetes参数
a.下载kubernetes编译好的二进制文件并进行分发

wget https://dl.k8s.io/v1.8.5/kubernetes-server-linux-amd64.tar.gz
tar zxf kubernetes-server-linux-amd64.tar.gz 
cp -rf kubernetes/server/bin/{kube-apiserver,kube-controller-manager,kubectl,kubefed,kubelet,kube-proxy,kube-scheduler} /usr/local/bin/
scp -r kubernetes/server/bin/{kubelet,kube-proxy} 192.168.0.211:/usr/local/bin/
scp -r kubernetes/server/bin/{kubelet,kube-proxy} 192.168.0.212:/usr/local/bin/

#查看kubernetes最新版，可到https://github.com/kubernetes/kubernetes/releases
然后进入 CHANGELOG-x.x.md就可限制二进制的下载地址

b.创建 TLS Bootstrapping Token

cd /etc/kubernetes

export BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ' ')

cat > token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

c.创建 kubelet bootstrapping kubeconfig 文件

cd /etc/kubernetes
export KUBE_APISERVER="https://192.168.0.210:6443"

#设置集群参数

kubectl config set-cluster kubernetes \
  --certificate-authority=/etc/kubernetes/ssl/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=bootstrap.kubeconfig

#设置客户端认证参数

kubectl config set-credentials kubelet-bootstrap \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=bootstrap.kubeconfig

#设置上下文参数

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig

#设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

d.创建 kube-proxy kubeconfig 文件
export KUBE_APISERVER="https://192.168.0.210:6443"
#设置集群参数

kubectl config set-cluster kubernetes \
  --certificate-authority=/etc/kubernetes/ssl/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig

#设置客户端认证参数

kubectl config set-credentials kube-proxy \
  --client-certificate=/etc/kubernetes/ssl/kube-proxy.pem \
  --client-key=/etc/kubernetes/ssl/kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig

#设置上下文参数

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig

#设置默认上下文
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

e.创建 kubectl kubeconfig 文件
export KUBE_APISERVER="https://192.168.0.210:6443"
#设置集群参数

kubectl config set-cluster kubernetes \
  --certificate-authority=/etc/kubernetes/ssl/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER}

#设置客户端认证参数

kubectl config set-credentials admin \
  --client-certificate=/etc/kubernetes/ssl/admin.pem \
  --embed-certs=true \
  --client-key=/etc/kubernetes/ssl/admin-key.pem

#设置上下文参数

kubectl config set-context kubernetes \
  --cluster=kubernetes \
  --user=admin

#设置默认上下文
kubectl config use-context kubernetes

f.将2个bootstrap.kubeconfig kube-proxy.kubeconfig文件分发至其余服务器

scp -r *.kubeconfig 192.168.0.211:/etc/kubernetes/
scp -r *.kubeconfig 192.168.0.212:/etc/kubernetes/

5.MASTER安装及配置
a.apiserver安装配置
#apiserver服务启动文件
vim /usr/lib/systemd/system/kube-apiserver.service

[Unit]
Description=Kubernetes API Service
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
After=etcd.service

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
ExecStart=/usr/local/bin/kube-apiserver \
        $KUBE_LOGTOSTDERR \
        $KUBE_LOG_LEVEL \
        $KUBE_ETCD_SERVERS \
        $KUBE_API_ADDRESS \
        $KUBE_API_PORT \
        $KUBELET_PORT \
        $KUBE_ALLOW_PRIV \
        $KUBE_SERVICE_ADDRESSES \
        $KUBE_ADMISSION_CONTROL \
        $KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

#配置kubernetes默认配置
vim /etc/kubernetes/config

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=true"

# How the controller-manager, scheduler, and proxy find the apiserver
#KUBE_MASTER="--master=http://sz-pg-oam-docker-test-001.tendcloud.com:8080"
KUBE_MASTER="--master=http://192.168.0.210:8080"

#配置apiserver参数
vim /etc/kubernetes/apiserver

###
## kubernetes system config
##
## The following values are used to configure the kube-apiserver
##
#
## The address on the local server to listen to.
#KUBE_API_ADDRESS="--insecure-bind-address=sz-pg-oam-docker-test-001.tendcloud.com"
KUBE_API_ADDRESS="--advertise-address=192.168.0.210 --bind-address=192.168.0.210 --insecure-bind-address=192.168.0.210"
#
## The port on the local server to listen on.
#KUBE_API_PORT="--port=8080"
#
## Port minions listen on
#KUBELET_PORT="--kubelet-port=10250"
#
## Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=https://192.168.0.210:2379,https://192.168.0.211:2379,https://192.168.0.212:2379"
#
## Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
#
## default admission control policies
KUBE_ADMISSION_CONTROL="--admission-control=ServiceAccount,NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"
#
## Add your own!
KUBE_API_ARGS="--authorization-mode=RBAC --runtime-config=rbac.authorization.k8s.io/v1beta1 --kubelet-https=true --enable-bootstrap-token-auth --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/ssl/kubernetes.pem --tls-private-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --client-ca-file=/etc/kubernetes/ssl/ca.pem --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem --etcd-cafile=/etc/kubernetes/ssl/ca.pem --etcd-certfile=/etc/kubernetes/ssl/kuberne
#如果出现错误，查看/var/log/messages
tes.pem --etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem --enable-swagger-ui=true --apiserver-count=3 --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/var/lib/audit.log --
event-ttl=1h"

#启动apiserver

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver

#如果出现错误，查看/var/log/messages

b.controller-manager服务配置
#controller-manager服务启动文件
vim /usr/lib/systemd/system/kube-controller-manager.service

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
ExecStart=/usr/local/bin/kube-controller-manager \
        $KUBE_LOGTOSTDERR \
        $KUBE_LOG_LEVEL \
        $KUBE_MASTER \
        $KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

#配置controller-manager服务配置文件
vim /etc/kubernetes/controller-manager

#The following values are used to configure the kubernetes controller-manager

#defaults from config and apiserver should be adequate

#Add your own!
KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --service-cluster-ip-range=10.254.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem --root-ca-file=/etc/kubernetes/ssl/ca.pem --leader-elect=true"

#启动controller-manager服务
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager

c.scheduler服务安装及配置
#配置scheduler服务启动文件
vim /usr/lib/systemd/system/kube-scheduler.service

[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
ExecStart=/usr/local/bin/kube-scheduler \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBE_MASTER \
            $KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

#配置scheduler服务配置文件
vim /etc/kubernetes/scheduler

#kubernetes scheduler config
#default config should be adequate
#Add your own!
KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"

#启动scheduler服务

systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler

d.测试master是否正常
kubectl get componentstatuses
#结果如下说明正常

NAME                 STATUS    MESSAGE              ERROR
scheduler            Healthy   ok                   
controller-manager   Healthy   ok                   
etcd-0               Healthy   {"health": "true"}   
etcd-1               Healthy   {"health": "true"}   
etcd-2               Healthy   {"health": "true"}

6.node安装(所有节点)
a.flannel安装及配置(容器网络我们采用flannel)
#yum安装flannel
yum install -y flannel
#检查node节点证书情况
ls /etc/kubernetes/ssl
#修改flannel.service配置文件如下
vi /usr/lib/systemd/system/flanneld.service

[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/etc/sysconfig/flanneld
EnvironmentFile=-/etc/sysconfig/docker-network
ExecStart=/usr/bin/flanneld-start \
  -etcd-endpoints=${ETCD_ENDPOINTS} \
  -etcd-prefix=${ETCD_PREFIX} \
  $FLANNEL_OPTIONS
ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

#修改flannel配置文件
vi /etc/sysconfig/flanneld

# Flanneld configuration options

# etcd url location.  Point this to the server where etcd runs
ETCD_ENDPOINTS="https://192.168.0.210:2379,https://192.168.0.211:2379,https://192.168.0.212:2379"

# etcd config key.  This is the configuration key that flannel queries
# For address range assignment
ETCD_PREFIX="/kube-centos/network"

# Any additional options that you want to pass
FLANNEL_OPTIONS="-etcd-cafile=/etc/kubernetes/ssl/ca.pem -etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem -etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem"

#在etcd中创建网络配置

etcdctl --endpoints=https://192.168.0.210:2379,https://192.168.0.211:2379,https://192.168.0.212:2379 \
  --ca-file=/etc/kubernetes/ssl/ca.pem \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  mkdir /kube-centos/network

etcdctl --endpoints=https://192.168.0.210:2379,https://192.168.0.211:2379,https://192.168.0.212:2379 \
  --ca-file=/etc/kubernetes/ssl/ca.pem \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  mk /kube-centos/network/config '{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}'

#flannel服务启动
systemctl daemon-reload
systemctl enable flanneld
systemctl start flanneld
systemctl status flanneld

b.配置Docker服务启动文件,集成flannel
vim /usr/lib/systemd/system/docker.service

在ExecStart上增加
EnvironmentFile=-/run/flannel/docker
EnvironmentFile=-/run/docker_opts.env
EnvironmentFile=-/run/flannel/subnet.env
修改如下
ExecStart=/usr/bin/dockerd --bip=${FLANNEL_SUBNET} --mtu=${FLANNEL_MTU}

效果如下:

[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
EnvironmentFile=-/run/flannel/docker
EnvironmentFile=-/run/docker_opts.env
EnvironmentFile=-/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd --bip=${FLANNEL_SUBNET} --mtu=${FLANNEL_MTU}
ExecReload=/bin/kill -s HUP $MAINPID
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
# Uncomment TasksMax if your systemd version supports it.
# Only systemd 226 and above support this version.
#TasksMax=infinity
TimeoutStartSec=0
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
# restart the docker process if it exits prematurely
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

#重启启动Docker服务

systemctl daemon-reload
systemctl restart docker
systemctl status docker

切记要先启动flannel，再启动Docker

c.查询etcd是否分配网络

etcdctl --endpoints=${ETCD_ENDPOINTS} \
  --ca-file=/etc/kubernetes/ssl/ca.pem \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  ls /kube-centos/network/subnets

结果大致如下

/kube-centos/network/subnets/172.30.1.0-24
/kube-centos/network/subnets/172.30.54.0-24
/kube-centos/network/subnets/172.30.99.0-24
etcdctl --endpoints=${ETCD_ENDPOINTS} \
  --ca-file=/etc/kubernetes/ssl/ca.pem \
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
  get /kube-centos/network/config

结果大致如下

{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}

d.安装及配置kubelet
#创建kubelet服务启动文件
vim /usr/lib/systemd/system/kubelet.service

[Unit]
Description=Kubernetes Kubelet Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/usr/local/bin/kubelet \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBELET_API_SERVER \
            $KUBELET_ADDRESS \
            $KUBELET_PORT \
            $KUBELET_HOSTNAME \
            $KUBE_ALLOW_PRIV \
            $KUBELET_POD_INFRA_CONTAINER \
            $KUBELET_ARGS
Restart=on-failure

[Install]
WantedBy=multi-user.target

#kubelet认证配置文件
vim /etc/kubernetes/kubelet.kubeconfig

apiVersion: v1
kind: Config
clusters:
  - cluster:
      server: http://192.168.0.210:8080
    name: local
contexts:
  - context:
      cluster: local
    name: local
current-context: local

#kubelet配置文件
vim /etc/kubernetes/kubelet

node210下/etc/kubernetes/kubelet内容如下

###
## kubernetes kubelet (minion) config
#
## The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=192.168.0.210"
#
## The port for the info server to serve on
#KUBELET_PORT="--port=10250"
#
## You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=192.168.0.210"
#
## location of the api-server
#KUBELET_API_SERVER="--api-servers=http://192.168.0.210:8080"
KUBELET_API_SERVER=" "
#
## pod infrastructure container
#KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=kubernetes/pause"
#
## Add your own!
#KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --experimental-bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --require-kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false"
KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false --fail-swap-on=false"

node211里配置文件如下

###
## kubernetes kubelet (minion) config
#
## The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=192.168.0.211"
#
## The port for the info server to serve on
#KUBELET_PORT="--port=10250"
#
## You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=192.168.0.211"
#
## location of the api-server
#KUBELET_API_SERVER="--api-servers=http://192.168.0.210:8080"
KUBELET_API_SERVER=" "
#
## pod infrastructure container
#KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=kubernetes/pause"
#
## Add your own!
#KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --experimental-bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --require-kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false"
KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false --fail-swap-on=false"

node212里配置文件如下

###
## kubernetes kubelet (minion) config
#
## The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=192.168.0.212"
#
## The port for the info server to serve on
#KUBELET_PORT="--port=10250"
#
## You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=192.168.0.212"
#
## location of the api-server
#KUBELET_API_SERVER="--api-servers=http://192.168.0.210:8080"
KUBELET_API_SERVER=" "
#
## pod infrastructure container
#KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=kubernetes/pause"
#
## Add your own!
#KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --experimental-bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --require-kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false"
KUBELET_ARGS="--cgroup-driver=cgroupfs --cluster-dns=10.254.0.2 --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --cert-dir=/etc/kubernetes/ssl --cluster-domain=cluster.local --hairpin-mode promiscuous-bridge --serialize-image-pulls=false --fail-swap-on=false"

#启动kubelet服务

mkdir -p /var/lib/kubelet

systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet
systemctl status kubelet

#这里很容易出错，出错时查看/var/log/messages看日志进行排错

#检查kubelet服务是否正常

kubectl get nodes
NAME            STATUS    ROLES     AGE       VERSION
192.168.0.210   Ready     <none>    14h       v1.8.5
192.168.0.211   Ready     <none>    14h       v1.8.5
192.168.0.212   Ready     <none>    14h       v1.8.5

c.安装及配置kube-proxy
#配置kube-proxy服务启动文件
vim /usr/lib/systemd/system/kube-proxy.service

[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/local/bin/kube-proxy \
        $KUBE_LOGTOSTDERR \
        $KUBE_LOG_LEVEL \
        $KUBE_MASTER \
        $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

#kube-proxy配置文件如下：
node210:
vim /etc/kubernetes/proxy

###
# kubernetes proxy config

# default config should be adequate

# Add your own!
KUBE_PROXY_ARGS="--bind-address=192.168.0.210 --hostname-override=192.168.0.210 --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig --cluster-cidr=10.254.0.0/16"

node211:
vim /etc/kubernetes/proxy

###
# kubernetes proxy config

# default config should be adequate

# Add your own!
KUBE_PROXY_ARGS="--bind-address=192.168.0.211 --hostname-override=192.168.0.211 --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig --cluster-cidr=10.254.0.0/16"

node212:
vim /etc/kubernetes/proxy

###
# kubernetes proxy config

# default config should be adequate

# Add your own!
KUBE_PROXY_ARGS="--bind-address=192.168.0.212--hostname-override=192.168.0.212 --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig --cluster-cidr=10.254.0.0/16"

#启动kube-proxy服务

systemctl daemon-reload
systemctl enable kube-proxy
systemctl start kube-proxy
systemctl status kube-proxy

d.在所有节点默认开启forward为accept
vim /usr/lib/systemd/system/forward.service

[Unit]
Description=iptables forward
Documentation=http://iptables.org/
After=network.target docker.service

[Service]
Type=forking
ExecStart=/usr/sbin/iptables -P FORWARD ACCEPT
ExecReload=/usr/sbin/iptables -P FORWARD ACCEPT
ExecStop=/usr/sbin/iptables -P FORWARD ACCEPT
PrivateTmp=true

[Install]
WantedBy=multi-user.target

#启动forward服务

systemctl daemon-reload
systemctl enable forward
systemctl start forward
systemctl status forward

7.测试集群是否工作正常
a.创建一个deploy
kubectl run nginx --replicas=2 --labels="run=nginx-service" --image=nginx --port=80
b.映射服务到外网可访问
kubectl expose deployment nginx --type=NodePort --name=nginx-service
c.查看服务状态

kubectl describe svc example-service
Name:                   nginx-service
Namespace:              default
Labels:                 run=nginx-service
Annotations:            <none>
Selector:               run=nginx-service
Type:                   NodePort
IP:                     10.254.84.99
Port:                   <unset> 80/TCP
NodePort:               <unset> 30881/TCP
Endpoints:              172.30.1.2:80,172.30.54.2:80
Session Affinity:       None
Events:                 <none>

d.查看pods启动情况

kubectl get pods
NAME                     READY     STATUS    RESTARTS   AGE
nginx-2317272628-nsfrr   1/1       Running   0          1m
nginx-2317272628-qbbgg   1/1       Running   0          1m

e.在外网通过
http://192.168.0.210:30881
http://192.168.0.211:30881
http://192.168.0.212:30881
都可以访问nginx页面

若无法访问，可通过iptables -nL查看forward链是否开启


本文转自 rong341233 51CTO博客，原文链接:http://blog.51cto.com/fengwan/2049124


上一篇 下一篇
优秀的个人博客,低调大师

微信关注我们

原文链接：https://yq.aliyun.com/articles/500127

转载内容版权归作者及来源网站所有！

低调大师中文资讯倾力打造互联网数据资讯、行业资源、电子商务、移动互联网、网络营销平台。持续更新报道IT业界、互联网、市场资讯、驱动更新,是最及时权威的产业资讯及硬件资讯报道平台。

使用harbor配置docker registry

前面连说了几篇与kubernetes相关的内容，这篇我们来说说docker registry。docker的registry与kubernetes本身并没有太直接的关系。但是任何使用到docker的地方，总少不了这玩艺儿。所以这篇博文我们专门来说一说如何使用开源的harbor来配置管理我们的私有registry。 harbor官方是这么描述harbor的：Harbor是可靠的企业级Registry服务器。企业用户可使用Harbor搭建私有容器Registry服务，提高生产效率和安全度，既可应用于生产环境，也可以在开发环境中使用。github地址：https://github.com/vmware/harbor 需要说明的是，由于harbor只支持registry v2的api，所以对docker的版本也是有要求的，至少得>=1.6.0。同时harbor的安装还依赖于docker-compose，当然官方也提供直接使用kubernetes部署的yml文件。所以其实我们可以想见，harbor的部署一定是以容器的形式来完成的 harbor共有六个容器组成： harbor_ui：harb...
2017-11-12
581
上一篇

Harbor用户机制、镜像同步和与Kubernetes的集成实践

Habor是由VMWare公司开源的容器镜像仓库。事实上，Habor是在Docker Registry上进行了相应的企业级扩展，从而获得了更加广泛的应用，这些新的企业级特性包括：管理用户界面，基于角色的访问控制 ，AD/LDAP集成以及审计日志等。 容器的核心在于镜象的概念，由于可以将应用打包成镜像，并快速的启动和停止，因此容器成为新的炙手可热的基础设施CAAS，并为敏捷和持续交付包括DevOps提供底层的支持。 而Habor和Docker Registry所提供的容器镜像仓库，就是容器镜像的存储和分发服务。之所以会有这样的服务存在，是由于以下三个原因： 提供分层传输机制，优化网络传输 Docker镜像是是分层的，而如果每次传输都使用全量文件（所以用FTP的方式并不适合），显然不经济。必须提供识别分层传输的机制，以层的UUID为标识，确定传输的对象。 提供WEB界面，优化用户体验 只用镜像的名字来进行上传下载显然很不方便，需要有一个用户界面可以支持登陆、搜索功能，包括区分公有、私有镜像。 支持水平扩展集群 当有用户对镜像的上传下载操作集中在某服务器，需要对相应的访问压力作分解。 上面这...
2017-11-12
557
下一篇

相关文章

发表评论

资源下载

更多资源
优质分享App

优质分享App

近一个月的开发和优化，本站点的第一个app全新上线。该app采用极致压缩，本体才4.36MB。系统里面做了大量数据访问、缓存优化。方便用户在手机上查看文章。后续会推出HarmonyOS的适配版本。

时间: 2025-12-03 大小: 4.36MB 下载: 23次
Spring

Spring

Spring框架（Spring Framework）是由Rod Johnson于2002年提出的开源Java企业级应用框架，旨在通过使用JavaBean替代传统EJB实现方式降低企业级编程开发的复杂性。该框架基于简单性、可测试性和松耦合性设计理念，提供核心容器、应用上下文、数据访问集成等模块，支持整合Hibernate、Struts等第三方框架，其适用范围不仅限于服务器端开发，绝大多数Java应用均可从中受益。

时间: 2025-12-17 大小: 5MB 下载: 1次
Rocky Linux

Rocky Linux

Rocky Linux（中文名：洛基）是由Gregory Kurtzer于2020年12月发起的企业级Linux发行版，作为CentOS稳定版停止维护后与RHEL（Red Hat Enterprise Linux）完全兼容的开源替代方案，由社区拥有并管理，支持x86_64、aarch64等架构。其通过重新编译RHEL源代码提供长期稳定性，采用模块化包装和SELinux安全架构，默认包含GNOME桌面环境及XFS文件系统，支持十年生命周期更新。

时间: 2026-01-03 大小: 1.42GB 下载: 2次
Sublime Text

Sublime Text

Sublime Text具有漂亮的用户界面和强大的功能，例如代码缩略图，Python的插件，代码段等。还可自定义键绑定，菜单和工具栏。Sublime Text 的主要功能包括：拼写检查，书签，完整的 Python API ， Goto 功能，即时项目切换，多选择，多窗口等等。Sublime Text 是一个跨平台的编辑器，同时支持Windows、Linux、Mac OS X等操作系统。

时间: 2025-12-03 大小: 9.84MB 下载: 39次
手机查看

扫码在手机上查看文章

扫描二维码，手机阅读更方便

热门标签
Kubernetes OpenAi SpringBoot4 Nacos3 Rocky Docker DeepSeek HarmonyOS6 Jdk25 SpringCloud Gemini3 Service Mesh Redis

欢迎您来访！

登录后，您将获得更多功能！
热门文章
联系我们

有任何问题或合作意向欢迎联系我们

Email: 99873273@qq.com

QQ: 99873273

用户登录
用户注册