您现在的位置是:首页 > 文章详情

CentOS下查找处理文件名后包含空格的文件

日期:2017-11-15点击:740

当Linux下文件名中出现空格这类特殊情况话,如何查找或确认那些文件名后有空格呢? 又怎么批量替换处理掉这些空格呢?
 
 
方法1: 输入文件名后使用Tab键,如果使用Tab键后面出现\ \ \这样的可见字符,那么该文件名包含空格。当然,这个方法弊端很大,例如,效率低下,不能批量查找,只有当你怀疑某个文件名后有空格,这个方法才比较凑效。另外,不能查找文件中间包含空格的文件名。如下测试所示:
 

 [root@DB-Server kerry]# cat >"test.txt    "
 it is only for test!
  
 [1]+  Stopped                 cat > "test.txt    "
 [root@DB-Server kerry]# cat >"tes t.txt"
 it is only for test too!
  
 [2]+  Stopped                 cat > "tes t.txt"
 [root@DB-Server kerry]# ls test.txt
 ls: test.txt: No such file or directory
 [root@DB-Server kerry]# ls test
 test~         test1.py      test.py       test.sh       test.txt      
 [root@DB-Server kerry]# ls test.txt\ \ \ \  
 test.txt    
 [root@DB-Server kerry]# ls tes
 test~         test1.py      test.py       test.sh       tes t.txt     test.txt   

  
clip_image001
 
 
方法2: 使用find命令查找文件名中包含空格的文件。
 
 
[root@DB-Server kerry]# find . -type f -name "* *" -print
./test.txt   
./tes t.txt
 
 
那么如何将这些空格替换掉呢?  下面脚本可以替换文件中间的空格,用下划线替换空格,但是只能替换文件中间的空格,并不能替换文件名后面的空格。如下测试所示:
 
 

 find . -type f -name "* *" -print |
 while read name; do
 na=$(echo $name | tr ' ' '_')
 if [[ $name != $na ]]; then
 mv "$name" "$na"
 fi
 done

 clip_image002
 
 
上面脚本只能将文件名中间有空格的替换为下划线。那么如何解决文件名后有空格的情况呢? 可以用其它shell脚本实现,如下所示:
 

 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"test.txt    "
 12
 [root@DB-Server kerry]# cat >"tes t.txt"
 12
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 ./test.txt    
 ./tes t.txt
 [root@DB-Server kerry]# for file in *; do mv "$file" `echo $file | tr ' ' '_'` ; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 [root@DB-Server kerry]# ls -lrt
 total 8
 -rw-r--r-- 1 root root 0 Nov 13 10:04 test.txt
 -rw-r--r-- 1 root root 0 Nov 13 10:04 tes_t.txt

  
clip_image003
 
 如上所示,虽然文件名中间的空格被替换为了下划线,但是后面的空格没有替换为下划线,而是将那些空格直接截断了。Why?下面使用sed命令也是如此
 
 

 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"test.txt    "
 12
 [root@DB-Server kerry]# cat >"tes t.txt"
 12
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 ./test.txt    
 ./tes t.txt
 [root@DB-Server kerry]# for i in *' '*; do   mv "$i" `echo $i | sed -e 's/ /_/g'`; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 [root@DB-Server kerry]# ls -lrt
 total 8
 -rw-r--r-- 1 root root 0 Nov 13 09:29 test.txt
 -rw-r--r-- 1 root root 0 Nov 13 09:29 tes_t.txt
 [root@DB-Server kerry]# 
 [root@DB-Server kerry]# 

 clip_image004
 
 
 
其实,这个是因为读取文件名是$file 与"$file"是不同的,$file不会识别文件名后面的空格,而"$file"才会失败文件名后面的空格。所以上面脚本其实只是取巧而已。
 

 [root@DB-Server kerry]# rm -rf *;
 [root@DB-Server kerry]# cat >"test.txt    "
 123
 [root@DB-Server kerry]#  for file in *; do echo "$file"; echo "$file" | wc -m ;   done;
 test.txt    
 13
 [root@DB-Server kerry]#  for file in *; do echo $file; echo $file | wc -m ;   done;
 test.txt
 9
 [root@DB-Server kerry]# 

 clip_image005
 
所以,正确的替换空格的命令应该为如下:
 
方案1:
 

 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"test.txt    "
 123456
  
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 ./test.txt    
 [root@DB-Server kerry]# for file in *; do mv "$file" `echo "$file" | tr ' ' '\n'` ; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 [root@DB-Server kerry]# ls test.txt
 test.txt
 [root@DB-Server kerry]# 

  
方案2:
 

 [root@DB-Server kerry]# 
 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"test.txt    "
 123456
  
 [root@DB-Server kerry]# for file in *' '*; do   mv "$file" `echo "$file" | sed -e 's/ /n/g'`; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print

 但是对于文件名中间包含空格的情况,上面两个脚本都无法完美解决。如下所示:
 

 [root@DB-Server kerry]# 
 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"tes t.txt"
 123456
  
 [root@DB-Server kerry]# for file in *; do mv "$file" `echo "$file" | tr ' ' '_'` ; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 [root@DB-Server kerry]# ls -lrt 
 total 8
 -rw-r--r-- 1 root root 7 Nov 13 16:00 tes_t.txt
 [root@DB-Server kerry]# 
  
  
 [root@DB-Server kerry]# rm -rf *
 [root@DB-Server kerry]# cat >"tes t.txt"
 123456
 [root@DB-Server kerry]# cat >"test.txt    "
 654321
  
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 ./test.txt    
 ./tes t.txt
 [root@DB-Server kerry]# for file in *; do mv "$file" `echo "$file" | tr ' ' '_'` ; done
 [root@DB-Server kerry]# find . -type f -name "* *" -print
 [root@DB-Server kerry]# ls -lrt
 total 12
 -rw-r--r-- 1 root root 0 Nov 13 15:59 tes_t.txt
 -rw-r--r-- 1 root root 7 Nov 13 15:59 test.txt____

  
 
当然对于这两种特殊情况,上面脚本都不能一起处理,如上所示,后面的空格会被替换成了下划线。这反而不是我们想要的,反而最上面的那两种脚本,可以误打误撞的解决这两种问题。当然让前提是你得知其然知其所以然!
 

原文链接:https://www.centoschina.cn/course/introduction/9232.html
关注公众号

低调大师中文资讯倾力打造互联网数据资讯、行业资源、电子商务、移动互联网、网络营销平台。

持续更新报道IT业界、互联网、市场资讯、驱动更新,是最及时权威的产业资讯及硬件资讯报道平台。

转载内容版权归作者及来源网站所有,本站原创内容转载请注明来源。

文章评论

共有0条评论来说两句吧...

文章二维码

扫描即可查看该文章

点击排行

推荐阅读

最新文章