使用的环境是：Hadoop-2.6.0 Oozie 4.2.0 Jdk 1.7 Maven 3.3.9 Pig0.15.0 Hive-1.2.1 Sqoop 1.99.6
注意： apache版本的oozie需要自己编译，由于我本身的环境是cdh5，所以可以直接cdh编译好的版本。（即oozie-4.1.0-cdh5.5.4.tar.gz）
然后，我们配置好$OOZIE_HOME/conf/oozie-site.xml 和 配置$OOZIE_HOME/conf/oozie-default.xml （这个配置文件，一般是不需动的，它里面是最全的）
![复制代码]()
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<configuration>
<!-- ************************** VERY IMPORTANT ************************** -->
<!-- This file is in the Oozie configuration directory only for reference. -->
<!-- It is not loaded by Oozie, Oozie uses its own privatecopy. -->
<!-- ************************** VERY IMPORTANT ************************** -->
<property>
<name>oozie.output.compression.codec</name>
<value>gz</value>
<description>
The name of the compression codec to use.
The implementation class for the codec needs to be specified through another property oozie.compression.codecs.
You can specify a comma separated list of 'Codec_name'='Codec_class' for oozie.compression.codecs
where codec class implements the interface org.apache.oozie.compression.CompressionCodec.
If oozie.compression.codecs is not specified, gz codec implementation is used by default.
</description>
</property>
<property>
<name>oozie.action.mapreduce.uber.jar.enable</name>
<value>false</value>
<description>
If true, enables the oozie.mapreduce.uber.jar mapreduce workflow configuration property, which is used to specify an
uber jar in HDFS. Submitting a workflow with an uber jar requires at least Hadoop 2.2.0 or 1.2.0. If false, workflows
which specify the oozie.mapreduce.uber.jar configuration property will fail.
</description>
</property>
<property>
<name>oozie.processing.timezone</name>
<value>UTC</value>
<description>
Oozie server timezone. Valid values are UTC and GMT(+/-)####, for example 'GMT+0530' would be India
timezone. All dates parsed and genered dates by Oozie Coordinator/Bundle will be done in the specified
timezone. The default value of 'UTC' should not be changed under normal circumtances. If for any reason
is changed, note that GMT(+/-)#### timezones do not observe DST changes.
</description>
</property>
<!-- Base Oozie URL: <SCHEME>://<HOST>:<PORT>/<CONTEXT> -->
<property>
<name>oozie.base.url</name>
<value>http://localhost:8080/oozie</value>
<description>
Base Oozie URL.
</description>
</property>
<!-- Services -->
<property>
<name>oozie.system.id</name>
<value>oozie-${user.name}</value>
<description>
The Oozie system ID.
</description>
</property>
<property>
<name>oozie.systemmode</name>
<value>NORMAL</value>
<description>
System mode for Oozie at startup.
</description>
</property>
<property>
<name>oozie.delete.runtime.dir.on.shutdown</name>
<value>true</value>
<description>
If the runtime directory should be kept after Oozie shutdowns down.
</description>
</property>
<property>
<name>oozie.services</name>
<value>
org.apache.oozie.service.SchedulerService,
org.apache.oozie.service.InstrumentationService,
org.apache.oozie.service.MemoryLocksService,
org.apache.oozie.service.UUIDService,
org.apache.oozie.service.ELService,
org.apache.oozie.service.AuthorizationService,
org.apache.oozie.service.UserGroupInformationService,
org.apache.oozie.service.HadoopAccessorService,
org.apache.oozie.service.JobsConcurrencyService,
org.apache.oozie.service.URIHandlerService,
org.apache.oozie.service.DagXLogInfoService,
org.apache.oozie.service.SchemaService,
org.apache.oozie.service.LiteWorkflowAppService,
org.apache.oozie.service.JPAService,
org.apache.oozie.service.StoreService,
org.apache.oozie.service.SLAStoreService,
org.apache.oozie.service.DBLiteWorkflowStoreService,
org.apache.oozie.service.CallbackService,
org.apache.oozie.service.ActionService,
org.apache.oozie.service.ShareLibService,
org.apache.oozie.service.CallableQueueService,
org.apache.oozie.service.ActionCheckerService,
org.apache.oozie.service.RecoveryService,
org.apache.oozie.service.PurgeService,
org.apache.oozie.service.CoordinatorEngineService,
org.apache.oozie.service.BundleEngineService,
org.apache.oozie.service.DagEngineService,
org.apache.oozie.service.CoordMaterializeTriggerService,
org.apache.oozie.service.StatusTransitService,
org.apache.oozie.service.PauseTransitService,
org.apache.oozie.service.GroupsService,
org.apache.oozie.service.ProxyUserService,
org.apache.oozie.service.XLogStreamingService,
org.apache.oozie.service.JvmPauseMonitorService,
org.apache.oozie.service.SparkConfigurationService
</value>
<description>
All services to be created and managed by Oozie Services singleton.
Class names must be separated by commas.
</description>
</property>
<property>
<name>oozie.services.ext</name>
<value> </value>
<description>
To add/replace services defined in 'oozie.services' with custom implementations.
Class names must be separated by commas.
</description>
</property>
<property>
<name>oozie.service.XLogStreamingService.buffer.len</name>
<value>4096</value>
<description>4K buffer for streaming the logs progressively</description>
</property>
<!-- HCatAccessorService -->
<property>
<name>oozie.service.HCatAccessorService.jmsconnections</name>
<value>
default=java.naming.factory.initial#org.apache.activemq.jndi.ActiveMQInitialContextFactory;java.naming.provider.url#tcp://localhost:61616;connectionFactoryNames#ConnectionFactory
</value>
<description>
Specify the map of endpoints to JMS configuration properties. In general, endpoint
identifies the HCatalog server URL. "default" is used if no endpoint is mentioned
in the query. If some JMS property is not defined, the system will use the property
defined jndi.properties. jndi.properties files is retrieved from the application classpath.
Mapping rules can also be provided for mapping Hcatalog servers to corresponding JMS providers.
hcat://${1}.${2}.server.com:8020=java.naming.factory.initial#Dummy.Factory;java.naming.provider.url#tcp://broker.${2}:61616
</description>
</property>
<!-- TopicService -->
<property>
<name>oozie.service.JMSTopicService.topic.name</name>
<value>
default=${username}
</value>
<description>
Topic options are ${username} or ${jobId} or a fixed string which can be specified as default or for a
particular job type.
For e.g To have a fixed string topic for workflows, coordinators and bundles,
specify in the following comma-separated format: {jobtype1}={some_string1}, {jobtype2}={some_string2}
where job type can be WORKFLOW, COORDINATOR or BUNDLE.
e.g. Following defines topic for workflow job, workflow action, coordinator job, coordinator action,
bundle job and bundle action
WORKFLOW=workflow,
COORDINATOR=coordinator,
BUNDLE=bundle
For jobs with no defined topic, default topic will be ${username}
</description>
</property>
<!-- JMS Producer connection -->
<property>
<name>oozie.jms.producer.connection.properties</name>
<value>java.naming.factory.initial#org.apache.activemq.jndi.ActiveMQInitialContextFactory;java.naming.provider.url#tcp://localhost:61616;connectionFactoryNames#ConnectionFactory</value>
</property>
<!-- JMSAccessorService -->
<property>
<name>oozie.service.JMSAccessorService.connectioncontext.impl</name>
<value>
org.apache.oozie.jms.DefaultConnectionContext
</value>
<description>
Specifies the Connection Context implementation
</description>
</property>
<!-- ConfigurationService -->
<property>
<name>oozie.service.ConfigurationService.ignore.system.properties</name>
<value>
oozie.service.AuthorizationService.security.enabled
</value>
<description>
Specifies "oozie.*" properties to cannot be overriden via Java system properties.
Property names must be separted by commas.
</description>
</property>
<property>
<name>oozie.service.ConfigurationService.verify.available.properties</name>
<value>true</value>
<description>
Specifies whether the available configurations check is enabled or not.
</description>
</property>
<!-- SchedulerService -->
<property>
<name>oozie.service.SchedulerService.threads</name>
<value>10</value>
<description>
The number of threads to be used by the SchedulerService to run deamon tasks.
If maxed out, scheduled daemon tasks will be queued up and delayed until threads become available.
</description>
</property>
<!-- AuthorizationService -->
<property>
<name>oozie.service.AuthorizationService.authorization.enabled</name>
<value>false</value>
<description>
Specifies whether security (user name/admin role) is enabled or not.
If disabled any user can manage Oozie system and manage any job.
</description>
</property>
<property>
<name>oozie.service.AuthorizationService.default.group.as.acl</name>
<value>false</value>
<description>
Enables old behavior where the User's default group is the job's ACL.
</description>
</property>
<!-- InstrumentationService -->
<property>
<name>oozie.service.InstrumentationService.logging.interval</name>
<value>60</value>
<description>
Interval, in seconds, at which instrumentation should be logged by the InstrumentationService.
If set to 0 it will not log instrumentation data.
</description>
</property>
<!-- PurgeService -->
<property>
<name>oozie.service.PurgeService.older.than</name>
<value>30</value>
<description>
Completed workflow jobs older than this value, in days, will be purged by the PurgeService.
</description>
</property>
<property>
<name>oozie.service.PurgeService.coord.older.than</name>
<value>7</value>
<description>
Completed coordinator jobs older than this value, in days, will be purged by the PurgeService.
</description>
</property>
<property>
<name>oozie.service.PurgeService.bundle.older.than</name>
<value>7</value>
<description>
Completed bundle jobs older than this value, in days, will be purged by the PurgeService.
</description>
</property>
<property>
<name>oozie.service.PurgeService.purge.old.coord.action</name>
<value>false</value>
<description>
Whether to purge completed workflows and their corresponding coordinator actions
of long running coordinator jobs if the completed workflow jobs are older than the value
specified in oozie.service.PurgeService.older.than.
</description>
</property>
<property>
<name>oozie.service.PurgeService.purge.limit</name>
<value>100</value>
<description>
Completed Actions purge - limit each purge to this value
</description>
</property>
<property>
<name>oozie.service.PurgeService.purge.interval</name>
<value>3600</value>
<description>
Interval at which the purge service will run, in seconds.
</description>
</property>
<!-- RecoveryService -->
<property>
<name>oozie.service.RecoveryService.wf.actions.older.than</name>
<value>120</value>
<description>
Age of the actions which are eligible to be queued for recovery, in seconds.
</description>
</property>
<property>
<name>oozie.service.RecoveryService.wf.actions.created.time.interval</name>
<value>7</value>
<description>
Created time period of the actions which are eligible to be queued for recovery in days.
</description>
</property>
<property>
<name>oozie.service.RecoveryService.callable.batch.size</name>
<value>10</value>
<description>
This value determines the number of callable which will be batched together
to be executed by a single thread.
</description>
</property>
<property>
<name>oozie.service.RecoveryService.push.dependency.interval</name>
<value>200</value>
<description>
This value determines the delay for push missing dependency command queueing
in Recovery Service
</description>
</property>
<property>
<name>oozie.service.RecoveryService.interval</name>
<value>60</value>
<description>
Interval at which the RecoverService will run, in seconds.
</description>
</property>
<property>
<name>oozie.service.RecoveryService.coord.older.than</name>
<value>600</value>
<description>
Age of the Coordinator jobs or actions which are eligible to be queued for recovery, in seconds.
</description>
</property>
<property>
<name>oozie.service.RecoveryService.bundle.older.than</name>
<value>600</value>
<description>
Age of the Bundle jobs which are eligible to be queued for recovery, in seconds.
</description>
</property>
<!-- CallableQueueService -->
<property>
<name>oozie.service.CallableQueueService.queue.size</name>
<value>10000</value>
<description>Max callable queue size</description>
</property>
<property>
<name>oozie.service.CallableQueueService.threads</name>
<value>10</value>
<description>Number of threads used for executing callables</description>
</property>
<property>
<name>oozie.service.CallableQueueService.callable.concurrency</name>
<value>3</value>
<description>
Maximum concurrency for a given callable type.
Each command is a callable type (submit, start, run, signal, job, jobs, suspend,resume, etc).
Each action type is a callable type (Map-Reduce, Pig, SSH, FS, sub-workflow, etc).
All commands that use action executors (action-start, action-end, action-kill and action-check) use
the action type as the callable type.
</description>
</property>
<property>
<name>oozie.service.CallableQueueService.callable.next.eligible</name>
<value>true</value>
<description>
If true, when a callable in the queue has already reached max concurrency,
Oozie continuously find next one which has not yet reach max concurrency.
</description>
</property>
<property>
<name>oozie.service.CallableQueueService.InterruptMapMaxSize</name>
<value>500</value>
<description>
Maximum Size of the Interrupt Map, the interrupt element will not be inserted in the map if exceeded the size.
</description>
</property>
<property>
<name>oozie.service.CallableQueueService.InterruptTypes</name>
<value>kill,resume,suspend,bundle_kill,bundle_resume,bundle_suspend,coord_kill,coord_change,coord_resume,coord_suspend</value>
<description>
Getting the types of XCommands that are considered to be of Interrupt type
</description>
</property>
<!-- CoordMaterializeTriggerService -->
<property>
<name>oozie.service.CoordMaterializeTriggerService.lookup.interval
</name>
<value>300</value>
<description> Coordinator Job Lookup interval.(in seconds).
</description>
</property>
<!-- Enable this if you want different scheduling interval for CoordMaterializeTriggerService.
By default it will use lookup interval as scheduling interval
<property>
<name>oozie.service.CoordMaterializeTriggerService.scheduling.interval
</name>
<value>300</value>
<description> The frequency at which the CoordMaterializeTriggerService will run.</description>
</property>
-->
<property>
<name>oozie.service.CoordMaterializeTriggerService.materialization.window
</name>
<value>3600</value>
<description> Coordinator Job Lookup command materialized each
job for this next "window" duration
</description>
</property>
<property>
<name>oozie.service.CoordMaterializeTriggerService.callable.batch.size</name>
<value>10</value>
<description>
This value determines the number of callable which will be batched together
to be executed by a single thread.
</description>
</property>
<property>
<name>oozie.service.CoordMaterializeTriggerService.materialization.system.limit</name>
<value>50</value>
<description>
This value determines the number of coordinator jobs to be materialized at a given time.
</description>
</property>
<property>
<name>oozie.service.coord.normal.default.timeout
</name>
<value>120</value>
<description>Default timeout for a coordinator action input check (in minutes) for normal job.
-1 means infinite timeout</description>
</property>
<property>
<name>oozie.service.coord.default.max.timeout
</name>
<value>86400</value>
<description>Default maximum timeout for a coordinator action input check (in minutes). 86400= 60days
</description>
</property>
<property>
<name>oozie.service.coord.input.check.requeue.interval
</name>
<value>60000</value>
<description>Command re-queue interval for coordinator data input check (in millisecond).
</description>
</property>
<property>
<name>oozie.service.coord.push.check.requeue.interval
</name>
<value>600000</value>
<description>Command re-queue interval for push dependencies (in millisecond).
</description>
</property>
<property>
<name>oozie.service.coord.default.concurrency
</name>
<value>1</value>
<description>Default concurrency for a coordinator job to determine how many maximum action should
be executed at the same time. -1 means infinite concurrency.</description>
</property>
<property>
<name>oozie.service.coord.default.throttle
</name>
<value>12</value>
<description>Default throttle for a coordinator job to determine how many maximum action should
be in WAITING state at the same time.</description>
</property>
<property>
<name>oozie.service.coord.materialization.throttling.factor
</name>
<value>0.05</value>
<description>Determine how many maximum actions should be in WAITING state for a single job at any time. The value is calculated by
this factor X the total queue size.</description>
</property>
<property>
<name>oozie.service.coord.check.maximum.frequency</name>
<value>true</value>
<description>
When true, Oozie will reject any coordinators with a frequency faster than 5 minutes. It is not recommended to disable
this check or submit coordinators with frequencies faster than 5 minutes: doing so can cause unintended behavior and
additional system stress.
</description>
</property>
<!-- ELService -->
<!-- List of supported groups for ELService -->
<property>
<name>oozie.service.ELService.groups</name>
<value>job-submit,workflow,wf-sla-submit,coord-job-submit-freq,coord-job-submit-nofuncs,coord-job-submit-data,coord-job-submit-instances,coord-sla-submit,coord-action-create,coord-action-create-inst,coord-sla-create,coord-action-start,coord-job-wait-timeout</value>
<description>List of groups for different ELServices</description>
</property>
<property>
<name>oozie.service.ELService.constants.job-submit</name>
<value>
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.job-submit</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.job-submit</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions without having to include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.job-submit</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions without having to include all the built in ones.
</description>
</property>
<!-- Workflow specifics -->
<property>
<name>oozie.service.ELService.constants.workflow</name>
<value>
KB=org.apache.oozie.util.ELConstantsFunctions#KB,
MB=org.apache.oozie.util.ELConstantsFunctions#MB,
GB=org.apache.oozie.util.ELConstantsFunctions#GB,
TB=org.apache.oozie.util.ELConstantsFunctions#TB,
PB=org.apache.oozie.util.ELConstantsFunctions#PB,
RECORDS=org.apache.oozie.action.hadoop.HadoopELFunctions#RECORDS,
MAP_IN=org.apache.oozie.action.hadoop.HadoopELFunctions#MAP_IN,
MAP_OUT=org.apache.oozie.action.hadoop.HadoopELFunctions#MAP_OUT,
REDUCE_IN=org.apache.oozie.action.hadoop.HadoopELFunctions#REDUCE_IN,
REDUCE_OUT=org.apache.oozie.action.hadoop.HadoopELFunctions#REDUCE_OUT,
GROUPS=org.apache.oozie.action.hadoop.HadoopELFunctions#GROUPS
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.workflow</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.workflow</name>
<value>
firstNotNull=org.apache.oozie.util.ELConstantsFunctions#firstNotNull,
concat=org.apache.oozie.util.ELConstantsFunctions#concat,
replaceAll=org.apache.oozie.util.ELConstantsFunctions#replaceAll,
appendAll=org.apache.oozie.util.ELConstantsFunctions#appendAll,
trim=org.apache.oozie.util.ELConstantsFunctions#trim,
timestamp=org.apache.oozie.util.ELConstantsFunctions#timestamp,
urlEncode=org.apache.oozie.util.ELConstantsFunctions#urlEncode,
toJsonStr=org.apache.oozie.util.ELConstantsFunctions#toJsonStr,
toPropertiesStr=org.apache.oozie.util.ELConstantsFunctions#toPropertiesStr,
toConfigurationStr=org.apache.oozie.util.ELConstantsFunctions#toConfigurationStr,
wf:id=org.apache.oozie.DagELFunctions#wf_id,
wf:name=org.apache.oozie.DagELFunctions#wf_name,
wf:appPath=org.apache.oozie.DagELFunctions#wf_appPath,
wf:conf=org.apache.oozie.DagELFunctions#wf_conf,
wf:user=org.apache.oozie.DagELFunctions#wf_user,
wf:group=org.apache.oozie.DagELFunctions#wf_group,
wf:callback=org.apache.oozie.DagELFunctions#wf_callback,
wf:transition=org.apache.oozie.DagELFunctions#wf_transition,
wf:lastErrorNode=org.apache.oozie.DagELFunctions#wf_lastErrorNode,
wf:errorCode=org.apache.oozie.DagELFunctions#wf_errorCode,
wf:errorMessage=org.apache.oozie.DagELFunctions#wf_errorMessage,
wf:run=org.apache.oozie.DagELFunctions#wf_run,
wf:actionData=org.apache.oozie.DagELFunctions#wf_actionData,
wf:actionExternalId=org.apache.oozie.DagELFunctions#wf_actionExternalId,
wf:actionTrackerUri=org.apache.oozie.DagELFunctions#wf_actionTrackerUri,
wf:actionExternalStatus=org.apache.oozie.DagELFunctions#wf_actionExternalStatus,
hadoop:counters=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_counters,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf,
fs:exists=org.apache.oozie.action.hadoop.FsELFunctions#fs_exists,
fs:isDir=org.apache.oozie.action.hadoop.FsELFunctions#fs_isDir,
fs:dirSize=org.apache.oozie.action.hadoop.FsELFunctions#fs_dirSize,
fs:fileSize=org.apache.oozie.action.hadoop.FsELFunctions#fs_fileSize,
fs:blockSize=org.apache.oozie.action.hadoop.FsELFunctions#fs_blockSize,
hcat:exists=org.apache.oozie.coord.HCatELFunctions#hcat_exists
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.WorkflowAppService.WorkflowDefinitionMaxLength</name>
<value>100000</value>
<description>
The maximum length of the workflow definition in bytes
An error will be reported if the length exceeds the given maximum
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.workflow</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Resolve SLA information during Workflow job submission -->
<property>
<name>oozie.service.ELService.constants.wf-sla-submit</name>
<value>
MINUTES=org.apache.oozie.util.ELConstantsFunctions#SUBMIT_MINUTES,
HOURS=org.apache.oozie.util.ELConstantsFunctions#SUBMIT_HOURS,
DAYS=org.apache.oozie.util.ELConstantsFunctions#SUBMIT_DAYS
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.wf-sla-submit</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.wf-sla-submit</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.wf-sla-submit</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Coordinator specifics -->l
<!-- Phase 1 resolution during job submission -->
<!-- EL Evalautor setup to resolve mainly frequency tags -->
<property>
<name>oozie.service.ELService.constants.coord-job-submit-freq</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-job-submit-freq</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-job-submit-freq</name>
<value>
coord:days=org.apache.oozie.coord.CoordELFunctions#ph1_coord_days,
coord:months=org.apache.oozie.coord.CoordELFunctions#ph1_coord_months,
coord:hours=org.apache.oozie.coord.CoordELFunctions#ph1_coord_hours,
coord:minutes=org.apache.oozie.coord.CoordELFunctions#ph1_coord_minutes,
coord:endOfDays=org.apache.oozie.coord.CoordELFunctions#ph1_coord_endOfDays,
coord:endOfMonths=org.apache.oozie.coord.CoordELFunctions#ph1_coord_endOfMonths,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-job-submit-freq</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.constants.coord-job-wait-timeout</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-job-wait-timeout</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions without having to include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-job-wait-timeout</name>
<value>
coord:days=org.apache.oozie.coord.CoordELFunctions#ph1_coord_days,
coord:months=org.apache.oozie.coord.CoordELFunctions#ph1_coord_months,
coord:hours=org.apache.oozie.coord.CoordELFunctions#ph1_coord_hours,
coord:minutes=org.apache.oozie.coord.CoordELFunctions#ph1_coord_minutes,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-job-wait-timeout</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions without having to include all the built in ones.
</description>
</property>
<!-- EL Evalautor setup to resolve mainly all constants/variables - no EL functions is resolved -->
<property>
<name>oozie.service.ELService.constants.coord-job-submit-nofuncs</name>
<value>
MINUTE=org.apache.oozie.coord.CoordELConstants#SUBMIT_MINUTE,
HOUR=org.apache.oozie.coord.CoordELConstants#SUBMIT_HOUR,
DAY=org.apache.oozie.coord.CoordELConstants#SUBMIT_DAY,
MONTH=org.apache.oozie.coord.CoordELConstants#SUBMIT_MONTH,
YEAR=org.apache.oozie.coord.CoordELConstants#SUBMIT_YEAR
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-job-submit-nofuncs</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-job-submit-nofuncs</name>
<value>
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-job-submit-nofuncs</name>
<value> </value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- EL Evalautor setup to **check** whether instances/start-instance/end-instances are valid
no EL functions will be resolved -->
<property>
<name>oozie.service.ELService.constants.coord-job-submit-instances</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-job-submit-instances</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-job-submit-instances</name>
<value>
coord:hoursInDay=org.apache.oozie.coord.CoordELFunctions#ph1_coord_hoursInDay_echo,
coord:daysInMonth=org.apache.oozie.coord.CoordELFunctions#ph1_coord_daysInMonth_echo,
coord:tzOffset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_tzOffset_echo,
coord:current=org.apache.oozie.coord.CoordELFunctions#ph1_coord_current_echo,
coord:currentRange=org.apache.oozie.coord.CoordELFunctions#ph1_coord_currentRange_echo,
coord:offset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_offset_echo,
coord:latest=org.apache.oozie.coord.CoordELFunctions#ph1_coord_latest_echo,
coord:latestRange=org.apache.oozie.coord.CoordELFunctions#ph1_coord_latestRange_echo,
coord:future=org.apache.oozie.coord.CoordELFunctions#ph1_coord_future_echo,
coord:futureRange=org.apache.oozie.coord.CoordELFunctions#ph1_coord_futureRange_echo,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_formatTime_echo,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:absolute=org.apache.oozie.coord.CoordELFunctions#ph1_coord_absolute_echo,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-job-submit-instances</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- EL Evalautor setup to **check** whether dataIn and dataOut are valid
no EL functions will be resolved -->
<property>
<name>oozie.service.ELService.constants.coord-job-submit-data</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-job-submit-data</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-job-submit-data</name>
<value>
coord:dataIn=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dataIn_echo,
coord:dataOut=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dataOut_echo,
coord:nominalTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_nominalTime_echo_wrap,
coord:actualTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_actualTime_echo_wrap,
coord:dateOffset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dateOffset_echo,
coord:dateTzOffset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dateTzOffset_echo,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_formatTime_echo,
coord:actionId=org.apache.oozie.coord.CoordELFunctions#ph1_coord_actionId_echo,
coord:name=org.apache.oozie.coord.CoordELFunctions#ph1_coord_name_echo,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:databaseIn=org.apache.oozie.coord.HCatELFunctions#ph1_coord_databaseIn_echo,
coord:databaseOut=org.apache.oozie.coord.HCatELFunctions#ph1_coord_databaseOut_echo,
coord:tableIn=org.apache.oozie.coord.HCatELFunctions#ph1_coord_tableIn_echo,
coord:tableOut=org.apache.oozie.coord.HCatELFunctions#ph1_coord_tableOut_echo,
coord:dataInPartitionFilter=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataInPartitionFilter_echo,
coord:dataInPartitionMin=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataInPartitionMin_echo,
coord:dataInPartitionMax=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataInPartitionMax_echo,
coord:dataInPartitions=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataInPartitions_echo,
coord:dataOutPartitions=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataOutPartitions_echo,
coord:dataOutPartitionValue=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataOutPartitionValue_echo,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-job-submit-data</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Resolve SLA information during Coordinator job submission -->
<property>
<name>oozie.service.ELService.constants.coord-sla-submit</name>
<value>
MINUTES=org.apache.oozie.coord.CoordELConstants#SUBMIT_MINUTES,
HOURS=org.apache.oozie.coord.CoordELConstants#SUBMIT_HOURS,
DAYS=org.apache.oozie.coord.CoordELConstants#SUBMIT_DAYS
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-sla-submit</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-sla-submit</name>
<value>
coord:dataOut=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dataOut_echo,
coord:nominalTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_nominalTime_echo_fixed,
coord:actualTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_actualTime_echo_wrap,
coord:dateOffset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dateOffset_echo,
coord:dateTzOffset=org.apache.oozie.coord.CoordELFunctions#ph1_coord_dateTzOffset_echo,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph1_coord_formatTime_echo,
coord:actionId=org.apache.oozie.coord.CoordELFunctions#ph1_coord_actionId_echo,
coord:name=org.apache.oozie.coord.CoordELFunctions#ph1_coord_name_echo,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:databaseOut=org.apache.oozie.coord.HCatELFunctions#ph1_coord_databaseOut_echo,
coord:tableOut=org.apache.oozie.coord.HCatELFunctions#ph1_coord_tableOut_echo,
coord:dataOutPartitions=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataOutPartitions_echo,
coord:dataOutPartitionValue=org.apache.oozie.coord.HCatELFunctions#ph1_coord_dataOutPartitionValue_echo,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-sla-submit</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Action creation for coordinator -->
<property>
<name>oozie.service.ELService.constants.coord-action-create</name>
<value>
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-action-create</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-action-create</name>
<value>
coord:hoursInDay=org.apache.oozie.coord.CoordELFunctions#ph2_coord_hoursInDay,
coord:daysInMonth=org.apache.oozie.coord.CoordELFunctions#ph2_coord_daysInMonth,
coord:tzOffset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_tzOffset,
coord:current=org.apache.oozie.coord.CoordELFunctions#ph2_coord_current,
coord:currentRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_currentRange,
coord:offset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_offset,
coord:latest=org.apache.oozie.coord.CoordELFunctions#ph2_coord_latest_echo,
coord:latestRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_latestRange_echo,
coord:future=org.apache.oozie.coord.CoordELFunctions#ph2_coord_future_echo,
coord:futureRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_futureRange_echo,
coord:actionId=org.apache.oozie.coord.CoordELFunctions#ph2_coord_actionId,
coord:name=org.apache.oozie.coord.CoordELFunctions#ph2_coord_name,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph2_coord_formatTime,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:absolute=org.apache.oozie.coord.CoordELFunctions#ph2_coord_absolute_echo,
coord:absoluteRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_absolute_range,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-action-create</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Action creation for coordinator used to only evaluate instance number like ${current (daysInMonth())}. current will be echo-ed -->
<property>
<name>oozie.service.ELService.constants.coord-action-create-inst</name>
<value>
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-action-create-inst</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-action-create-inst</name>
<value>
coord:hoursInDay=org.apache.oozie.coord.CoordELFunctions#ph2_coord_hoursInDay,
coord:daysInMonth=org.apache.oozie.coord.CoordELFunctions#ph2_coord_daysInMonth,
coord:tzOffset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_tzOffset,
coord:current=org.apache.oozie.coord.CoordELFunctions#ph2_coord_current_echo,
coord:currentRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_currentRange_echo,
coord:offset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_offset_echo,
coord:latest=org.apache.oozie.coord.CoordELFunctions#ph2_coord_latest_echo,
coord:latestRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_latestRange_echo,
coord:future=org.apache.oozie.coord.CoordELFunctions#ph2_coord_future_echo,
coord:futureRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_futureRange_echo,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph2_coord_formatTime,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:absolute=org.apache.oozie.coord.CoordELFunctions#ph2_coord_absolute_echo,
coord:absoluteRange=org.apache.oozie.coord.CoordELFunctions#ph2_coord_absolute_range,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-action-create-inst</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Resolve SLA information during Action creation/materialization -->
<property>
<name>oozie.service.ELService.constants.coord-sla-create</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-sla-create</name>
<value>
MINUTES=org.apache.oozie.coord.CoordELConstants#SUBMIT_MINUTES,
HOURS=org.apache.oozie.coord.CoordELConstants#SUBMIT_HOURS,
DAYS=org.apache.oozie.coord.CoordELConstants#SUBMIT_DAYS</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-sla-create</name>
<value>
coord:dataOut=org.apache.oozie.coord.CoordELFunctions#ph3_coord_dataOut,
coord:nominalTime=org.apache.oozie.coord.CoordELFunctions#ph2_coord_nominalTime,
coord:actualTime=org.apache.oozie.coord.CoordELFunctions#ph2_coord_actualTime,
coord:dateOffset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_dateOffset,
coord:dateTzOffset=org.apache.oozie.coord.CoordELFunctions#ph2_coord_dateTzOffset,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph2_coord_formatTime,
coord:actionId=org.apache.oozie.coord.CoordELFunctions#ph2_coord_actionId,
coord:name=org.apache.oozie.coord.CoordELFunctions#ph2_coord_name,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:databaseOut=org.apache.oozie.coord.HCatELFunctions#ph3_coord_databaseOut,
coord:tableOut=org.apache.oozie.coord.HCatELFunctions#ph3_coord_tableOut,
coord:dataOutPartitions=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataOutPartitions,
coord:dataOutPartitionValue=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataOutPartitionValue,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-sla-create</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<!-- Action start for coordinator -->
<property>
<name>oozie.service.ELService.constants.coord-action-start</name>
<value>
</value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.constants.coord-action-start</name>
<value> </value>
<description>
EL constant declarations, separated by commas, format is [PREFIX:]NAME=CLASS#CONSTANT.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.functions.coord-action-start</name>
<value>
coord:hoursInDay=org.apache.oozie.coord.CoordELFunctions#ph3_coord_hoursInDay,
coord:daysInMonth=org.apache.oozie.coord.CoordELFunctions#ph3_coord_daysInMonth,
coord:tzOffset=org.apache.oozie.coord.CoordELFunctions#ph3_coord_tzOffset,
coord:latest=org.apache.oozie.coord.CoordELFunctions#ph3_coord_latest,
coord:latestRange=org.apache.oozie.coord.CoordELFunctions#ph3_coord_latestRange,
coord:future=org.apache.oozie.coord.CoordELFunctions#ph3_coord_future,
coord:futureRange=org.apache.oozie.coord.CoordELFunctions#ph3_coord_futureRange,
coord:dataIn=org.apache.oozie.coord.CoordELFunctions#ph3_coord_dataIn,
coord:dataOut=org.apache.oozie.coord.CoordELFunctions#ph3_coord_dataOut,
coord:nominalTime=org.apache.oozie.coord.CoordELFunctions#ph3_coord_nominalTime,
coord:actualTime=org.apache.oozie.coord.CoordELFunctions#ph3_coord_actualTime,
coord:dateOffset=org.apache.oozie.coord.CoordELFunctions#ph3_coord_dateOffset,
coord:dateTzOffset=org.apache.oozie.coord.CoordELFunctions#ph3_coord_dateTzOffset,
coord:formatTime=org.apache.oozie.coord.CoordELFunctions#ph3_coord_formatTime,
coord:actionId=org.apache.oozie.coord.CoordELFunctions#ph3_coord_actionId,
coord:name=org.apache.oozie.coord.CoordELFunctions#ph3_coord_name,
coord:conf=org.apache.oozie.coord.CoordELFunctions#coord_conf,
coord:user=org.apache.oozie.coord.CoordELFunctions#coord_user,
coord:databaseIn=org.apache.oozie.coord.HCatELFunctions#ph3_coord_databaseIn,
coord:databaseOut=org.apache.oozie.coord.HCatELFunctions#ph3_coord_databaseOut,
coord:tableIn=org.apache.oozie.coord.HCatELFunctions#ph3_coord_tableIn,
coord:tableOut=org.apache.oozie.coord.HCatELFunctions#ph3_coord_tableOut,
coord:dataInPartitionFilter=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataInPartitionFilter,
coord:dataInPartitionMin=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataInPartitionMin,
coord:dataInPartitionMax=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataInPartitionMax,
coord:dataInPartitions=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataInPartitions,
coord:dataOutPartitions=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataOutPartitions,
coord:dataOutPartitionValue=org.apache.oozie.coord.HCatELFunctions#ph3_coord_dataOutPartitionValue,
hadoop:conf=org.apache.oozie.action.hadoop.HadoopELFunctions#hadoop_conf
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
</description>
</property>
<property>
<name>oozie.service.ELService.ext.functions.coord-action-start</name>
<value>
</value>
<description>
EL functions declarations, separated by commas, format is [PREFIX:]NAME=CLASS#METHOD.
This property is a convenience property to add extensions to the built in executors without having to
include all the built in ones.
</description>
</property>
<property>
<name>oozie.service.ELService.latest-el.use-current-time</name>
<value>false</value>
<description>
Determine whether to use the current time to determine the latest dependency or the action creation time.
This is for backward compatibility with older oozie behaviour.
</description>
</property>
<!-- UUIDService -->
<property>
<name>oozie.service.UUIDService.generator</name>
<value>counter</value>
<description>
random : generated UUIDs will be random strings.
counter: generated UUIDs generated will be a counter postfixed with the system startup time.
</description>
</property>
<!-- DBLiteWorkflowStoreService -->
<property>
<name>oozie.service.DBLiteWorkflowStoreService.status.metrics.collection.interval</name>
<value>5</value>
<description> Workflow Status metrics collection interval in minutes.</description>
</property>
<property>
<name>oozie.service.DBLiteWorkflowStoreService.status.metrics.window</name>
<value>3600</value>
<description>
Workflow Status metrics collection window in seconds. Workflow status will be instrumented for the window.
</description>
</property>
<!-- DB Schema Info, used by DBLiteWorkflowStoreService -->
<property>
<name>oozie.db.schema.name</name>
<value>oozie</value>
<description>
Oozie DataBase Name
</description>
</property>
<!-- StoreService -->
<property>
<name>oozie.service.JPAService.create.db.schema</name>
<value>false</value>
<description>
Creates Oozie DB.
If set to true, it creates the DB schema if it does not exist. If the DB schema exists is a NOP.
If set to false, it does not create the DB schema. If the DB schema does not exist it fails start up.
</description>
</property>
<property>
<name>oozie.service.JPAService.validate.db.connection</name>
<value>true</value>
<description>
Validates DB connections from the DB connection pool.
If the 'oozie.service.JPAService.create.db.schema' property is set to true, this property is ignored.
</description>
</property>
<property>
<name>oozie.service.JPAService.validate.db.connection.eviction.interval</name>
<value>300000</value>
<description>
Validates DB connections from the DB connection pool.
When validate db connection 'TestWhileIdle' is true, the number of milliseconds to sleep
between runs of the idle object evictor thread.
</description>
</property>
<property>
<name>oozie.service.JPAService.validate.db.connection.eviction.num</name>
<value>10</value>
<description>
Validates DB connections from the DB connection pool.
When validate db connection 'TestWhileIdle' is true, the number of objects to examine during
each run of the idle object evictor thread.
</description>
</property>
<property>
<name>oozie.service.JPAService.connection.data.source</name>
<value>org.apache.commons.dbcp.BasicDataSource</value>
<description>
DataSource to be used for connection pooling.
</description>
</property>
<property>
<name>oozie.service.JPAService.connection.properties</name>
<value> </value>
<description>
DataSource connection properties.
</description>
</property>
<property>
<name>oozie.service.JPAService.jdbc.driver</name>
<value>org.apache.derby.jdbc.EmbeddedDriver</value>
<description>
JDBC driver class.
</description>
</property>
<property>
<name>oozie.service.JPAService.jdbc.url</name>
<value>jdbc:derby:${oozie.data.dir}/${oozie.db.schema.name}-db;create=true</value>
<description>
JDBC URL.
</description>
</property>
<property>
<name>oozie.service.JPAService.jdbc.username</name>
<value>sa</value>
<description>
DB user name.
</description>
</property>
<property>
<name>oozie.service.JPAService.jdbc.password</name>
<value> </value>
<description>
DB user password.
IMPORTANT: if password is emtpy leave a 1 space string, the service trims the value,
if empty Configuration assumes it is NULL.
IMPORTANT: if the StoreServicePasswordService is active, it will reset this value with the value given in
the console.
</description>
</property>
<property>
<name>oozie.service.JPAService.pool.max.active.conn</name>
<value>10</value>
<description>
Max number of connections.
</description>
</property>
<!-- SchemaService -->
<property>
<name>oozie.service.SchemaService.wf.schemas</name>
<value>
oozie-workflow-0.1.xsd,oozie-workflow-0.2.xsd,oozie-workflow-0.2.5.xsd,oozie-workflow-0.3.xsd,oozie-workflow-0.4.xsd,
oozie-workflow-0.4.5.xsd,oozie-workflow-0.5.xsd,
shell-action-0.1.xsd,shell-action-0.2.xsd,shell-action-0.3.xsd,
email-action-0.1.xsd,email-action-0.2.xsd,
hive-action-0.2.xsd,hive-action-0.3.xsd,hive-action-0.4.xsd,hive-action-0.5.xsd,hive-action-0.6.xsd,
sqoop-action-0.2.xsd,sqoop-action-0.3.xsd,sqoop-action-0.4.xsd,
ssh-action-0.1.xsd,ssh-action-0.2.xsd,
distcp-action-0.1.xsd,distcp-action-0.2.xsd,
oozie-sla-0.1.xsd,oozie-sla-0.2.xsd,
hive2-action-0.1.xsd, hive2-action-0.2.xsd,
spark-action-0.1.xsd
</value>
<description>
List of schemas for workflows (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.wf.ext.schemas</name>
<value> </value>
<description>
List of additional schemas for workflows (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.coord.schemas</name>
<value>
oozie-coordinator-0.1.xsd,oozie-coordinator-0.2.xsd,oozie-coordinator-0.3.xsd,oozie-coordinator-0.4.xsd,
oozie-sla-0.1.xsd,oozie-sla-0.2.xsd
</value>
<description>
List of schemas for coordinators (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.coord.ext.schemas</name>
<value> </value>
<description>
List of additional schemas for coordinators (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.bundle.schemas</name>
<value>
oozie-bundle-0.1.xsd,oozie-bundle-0.2.xsd
</value>
<description>
List of schemas for bundles (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.bundle.ext.schemas</name>
<value> </value>
<description>
List of additional schemas for bundles (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.sla.schemas</name>
<value>
gms-oozie-sla-0.1.xsd,oozie-sla-0.2.xsd
</value>
<description>
List of schemas for semantic validation for GMS SLA (separated by commas).
</description>
</property>
<property>
<name>oozie.service.SchemaService.sla.ext.schemas</name>
<value> </value>
<description>
List of additional schemas for semantic validation for GMS SLA (separated by commas).
</description>
</property>
<!-- CallbackService -->
<property>
<name>oozie.service.CallbackService.base.url</name>
<value>${oozie.base.url}/callback</value>
<description>
Base callback URL used by ActionExecutors.
</description>
</property>
<property>
<name>oozie.service.CallbackService.early.requeue.max.retries</name>
<value>5</value>
<description>
If Oozie receives a callback too early (while the action is in PREP state), it will requeue the command this many times
to give the action time to transition to RUNNING.
</description>
</property>
<!-- CallbackServlet -->
<property>
<name>oozie.servlet.CallbackServlet.max.data.len</name>
<value>2048</value>
<description>
Max size in characters for the action completion data output.
</description>
</property>
<!-- External stats-->
<property>
<name>oozie.external.stats.max.size</name>
<value>-1</value>
<description>
Max size in bytes for action stats. -1 means infinite value.
</description>
</property>
<!-- JobCommand -->
<property>
<name>oozie.JobCommand.job.console.url</name>
<value>${oozie.base.url}?job=</value>
<description>
Base console URL for a workflow job.
</description>
</property>
<!-- ActionService -->
<property>
<name>oozie.service.ActionService.executor.classes</name>
<value>
org.apache.oozie.action.decision.DecisionActionExecutor,
org.apache.oozie.action.hadoop.JavaActionExecutor,
org.apache.oozie.action.hadoop.FsActionExecutor,
org.apache.oozie.action.hadoop.MapReduceActionExecutor,
org.apache.oozie.action.hadoop.PigActionExecutor,
org.apache.oozie.action.hadoop.HiveActionExecutor,
org.apache.oozie.action.hadoop.ShellActionExecutor,
org.apache.oozie.action.hadoop.SqoopActionExecutor,
org.apache.oozie.action.hadoop.DistcpActionExecutor,
org.apache.oozie.action.hadoop.Hive2ActionExecutor,
org.apache.oozie.action.ssh.SshActionExecutor,
org.apache.oozie.action.oozie.SubWorkflowActionExecutor,
org.apache.oozie.action.email.EmailActionExecutor,
org.apache.oozie.action.hadoop.SparkActionExecutor
</value>
<description>
List of ActionExecutors classes (separated by commas).
Only action types with associated executors can be used in workflows.
</description>
</property>
<property>
<name>oozie.service.ActionService.executor.ext.classes</name>
<value> </value>
<description>
List of ActionExecutors extension classes (separated by commas). Only action types with associated
executors can be used in workflows. This property is a convenience property to add extensions to the built
in executors without having to include all the built in ones.
</description>
</property>
<!-- ActionCheckerService -->
<property>
<name>oozie.service.ActionCheckerService.action.check.interval</name>
<value>60</value>
<description>
The frequency at which the ActionCheckService will run.
</description>
</property>
<property>
<name>oozie.service.ActionCheckerService.action.check.delay</name>
<value>600</value>
<description>
The time, in seconds, between an ActionCheck for the same action.
</description>
</property>
<property>
<name>oozie.service.ActionCheckerService.callable.batch.size</name>
<value>10</value>
<description>
This value determines the number of actions which will be batched together
to be executed by a single thread.
</description>
</property>
<!-- StatusTransitService -->
<property>
<name>oozie.service.StatusTransitService.statusTransit.interval</name>
<value>60</value>
<description>
The frequency in seconds at which the StatusTransitService will run.
</description>
</property>
<property>
<name>oozie.service.StatusTransitService.backward.support.for.coord.status</name>
<value>false</value>
<description>
true, if coordinator job submits using 'uri:oozie:coordinator:0.1' and wants to keep Oozie 2.x status transit.
if set true,
1. SUCCEEDED state in coordinator job means materialization done.
2. No DONEWITHERROR state in coordinator job
3. No PAUSED or PREPPAUSED state in coordinator job
4. PREPSUSPENDED becomes SUSPENDED in coordinator job
</description>
</property>
<property>
<name>oozie.service.StatusTransitService.backward.support.for.states.without.error</name>
<value>true</value>
<description>
true, if you want to keep Oozie 3.2 status transit.
Change it to false for Oozie 4.x releases.
if set true,
No states like RUNNINGWITHERROR, SUSPENDEDWITHERROR and PAUSEDWITHERROR
for coordinator and bundle
</description>
</property>
<!-- PauseTransitService -->
<property>
<name>oozie.service.PauseTransitService.PauseTransit.interval</name>
<value>60</value>
<description>
The frequency in seconds at which the PauseTransitService will run.
</description>
</property>
<!-- LauncherMapper -->
<property>
<name>oozie.action.max.output.data</name>
<value>2048</value>
<description>
Max size in characters for output data.
</description>
</property>
<property>
<name>oozie.action.fs.glob.max</name>
<value>50000</value>
<description>
Maximum number of globbed files.
</description>
</property>
<!-- JavaActionExecutor -->
<!-- This is common to the subclasses of action executors for Java (e.g. map-reduce, pig, hive, java, etc) -->
<property>
<name>oozie.action.launcher.mapreduce.job.ubertask.enable</name>
<value>true</value>
<description>
Enables Uber Mode for the launcher job in YARN/Hadoop 2 (no effect in Hadoop 1) for all action types by default.
This can be overridden on a per-action-type basis by setting
oozie.action.#action-type#.launcher.mapreduce.job.ubertask.enable in oozie-site.xml (where #action-type# is the action
type; for example, "pig"). And that can be overridden on a per-action basis by setting
oozie.launcher.mapreduce.job.ubertask.enable in an action's configuration section in a workflow. In summary, the
priority is this:
1. action's configuration section in a workflow
2. oozie.action.#action-type#.launcher.mapreduce.job.ubertask.enable in oozie-site
3. oozie.action.launcher.mapreduce.job.ubertask.enable in oozie-site
</description>
</property>
<property>
<name>oozie.action.shell.launcher.mapreduce.job.ubertask.enable</name>
<value>false</value>
<description>
The Shell action may have issues with the $PATH environment when using Uber Mode, and so Uber Mode is disabled by
default for it. See oozie.action.launcher.mapreduce.job.ubertask.enable
</description>
</property>
<property>
<name>oozie.action.shell.setup.hadoop.conf.dir</name>
<value>true</value>
<description>
The Shell action is commonly used to run programs that rely on HADOOP_CONF_DIR (e.g. hive, beeline, sqoop, etc). With
YARN, HADOO_CONF_DIR is set to the NodeManager's copies of Hadoop's *-site.xml files, which can be problematic because
(a) they are for meant for the NM, not necessarily clients, and (b) they won't have any of the configs that Oozie, or
the user through Oozie, sets. When this property is set to true, The Shell action will prepare the *-site.xml files
based on the correct config and set HADOOP_CONF_DIR to point to it. Setting it to false will make Oozie leave
HADOOP_CONF_DIR alone. This can also be set at the Action level by putting it in the Shell Action's configuration
section, which also has priorty. That all said, it's recommended to use the appropriate action type when possible.
</description>
</property>
<!-- HadoopActionExecutor -->
<!-- This is common to the subclasses action executors for map-reduce and pig -->
<property>
<name>oozie.action.retries.max</name>
<value>3</value>
<description>
The number of retries for executing an action in case of failure
</description>
</property>
<property>
<name>oozie.action.retry.interval</name>
<value>10</value>
<description>
The interval between retries of an action in case of failure
</description>
</property>
<property>
<name>oozie.action.retry.policy</name>
<value>periodic</value>
<description>
Retry policy of an action in case of failure. Possible values are periodic/exponential
</description>
</property>
<!-- SshActionExecutor -->
<property>
<name>oozie.action.ssh.delete.remote.tmp.dir</name>
<value>true</value>
<description>
If set to true, it will delete temporary directory at the end of execution of ssh action.
</description>
</property>
<property>
<name>oozie.action.ssh.http.command</name>
<value>curl</value>
<description>
Command to use for callback to oozie, normally is 'curl' or 'wget'.
The command must available in PATH environment variable of the USER@HOST box shell.
</description>
</property>
<property>
<name>oozie.action.ssh.http.command.post.options</name>
<value>--data-binary @#stdout --request POST --header "content-type:text/plain"</value>
<description>
The callback command POST options.
Used when the ouptut of the ssh action is captured.
</description>
</property>
<property>
<name>oozie.action.ssh.allow.user.at.host</name>
<value>true</value>
<description>
Specifies whether the user specified by the ssh action is allowed or is to be replaced
by the Job user
</description>
</property>
<!-- SubworkflowActionExecutor -->
<property>
<name>oozie.action.subworkflow.max.depth</name>
<value>50</value>
<description>
The maximum depth for subworkflows. For example, if set to 3, then a workflow can start subwf1, which can start subwf2,
which can start subwf3; but if subwf3 tries to start subwf4, then the action will fail. This is helpful in preventing
errant workflows from starting infintely recursive subworkflows.
</description>
</property>
<!-- HadoopAccessorService -->
<property>
<name>oozie.service.HadoopAccessorService.kerberos.enabled</name>
<value>false</value>
<description>
Indicates if Oozie is configured to use Kerberos.
</description>
</property>
<property>
<name>local.realm</name>
<value>LOCALHOST</value>
<description>
Kerberos Realm used by Oozie and Hadoop. Using 'local.realm' to be aligned with Hadoop configuration
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.keytab.file</name>
<value>${user.home}/oozie.keytab</value>
<description>
Location of the Oozie user keytab file.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.kerberos.principal</name>
<value>${user.name}/localhost@${local.realm}</value>
<description>
Kerberos principal for Oozie service.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.jobTracker.whitelist</name>
<value> </value>
<description>
Whitelisted job tracker for Oozie service.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.nameNode.whitelist</name>
<value> </value>
<description>
Whitelisted job tracker for Oozie service.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.hadoop.configurations</name>
<value>*=hadoop-conf</value>
<description>
Comma separated AUTHORITY=HADOOP_CONF_DIR, where AUTHORITY is the HOST:PORT of
the Hadoop service (JobTracker, YARN, HDFS). The wildcard '*' configuration is
used when there is no exact match for an authority. The HADOOP_CONF_DIR contains
the relevant Hadoop *-site.xml files. If the path is relative is looked within
the Oozie configuration directory; though the path can be absolute (i.e. to point
to Hadoop client conf/ directories in the local filesystem.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.action.configurations</name>
<value>*=action-conf</value>
<description>
Comma separated AUTHORITY=ACTION_CONF_DIR, where AUTHORITY is the HOST:PORT of
the Hadoop MapReduce service (JobTracker, YARN). The wildcard '*' configuration is
used when there is no exact match for an authority. The ACTION_CONF_DIR may contain
ACTION.xml files where ACTION is the action type ('java', 'map-reduce', 'pig',
'hive', 'sqoop', etc.). If the ACTION.xml file exists, its properties will be used
as defaults properties for the action. If the path is relative is looked within
the Oozie configuration directory; though the path can be absolute (i.e. to point
to Hadoop client conf/ directories in the local filesystem.
</description>
</property>
<!-- Credentials -->
<property>
<name>oozie.credentials.credentialclasses</name>
<value> </value>
<description>
A list of credential class mapping for CredentialsProvider
</description>
</property>
<property>
<name>oozie.credentials.skip</name>
<value>false</value>
<description>
This determines if Oozie should skip getting credentials from the credential providers. This can be overwritten at a
job-level or action-level.
</description>
</property>
<property>
<name>oozie.actions.main.classnames</name>
<value>distcp=org.apache.hadoop.tools.DistCp</value>
<description>
A list of class name mapping for Action classes
</description>
</property>
<property>
<name>oozie.service.WorkflowAppService.system.libpath</name>
<value>/user/${user.name}/share/lib</value>
<description>
System library path to use for workflow applications.
This path is added to workflow application if their job properties sets
the property 'oozie.use.system.libpath' to true.
</description>
</property>
<property>
<name>oozie.command.default.lock.timeout</name>
<value>5000</value>
<description>
Default timeout (in milliseconds) for commands for acquiring an exclusive lock on an entity.
</description>
</property>
<property>
<name>oozie.command.default.requeue.delay</name>
<value>10000</value>
<description>
Default time (in milliseconds) for commands that are requeued for delayed execution.
</description>
</property>
<!-- LiteWorkflowStoreService, Workflow Action Automatic Retry -->
<property>
<name>oozie.service.LiteWorkflowStoreService.user.retry.max</name>
<value>3</value>
<description>
Automatic retry max count for workflow action is 3 in default.
</description>
</property>
<property>
<name>oozie.service.LiteWorkflowStoreService.user.retry.inteval</name>
<value>10</value>
<description>
Automatic retry interval for workflow action is in minutes and the default value is 10 minutes.
</description>
</property>
<property>
<name>oozie.service.LiteWorkflowStoreService.user.retry.error.code</name>
<value>JA008,JA009,JA017,JA018,JA019,FS009,FS008,FS014</value>
<description>
Automatic retry interval for workflow action is handled for these specified error code:
FS009, FS008 is file exists error when using chmod in fs action.
FS014 is permission error in fs action
JA018 is output directory exists error in workflow map-reduce action.
JA019 is error while executing distcp action.
JA017 is job not exists error in action executor.
JA008 is FileNotFoundException in action executor.
JA009 is IOException in action executor.
ALL is the any kind of error in action executor.
</description>
</property>
<property>
<name>oozie.service.LiteWorkflowStoreService.user.retry.error.code.ext</name>
<value> </value>
<description>
Automatic retry interval for workflow action is handled for these specified extra error code:
ALL is the any kind of error in action executor.
</description>
</property>
<property>
<name>oozie.service.LiteWorkflowStoreService.node.def.version</name>
<value>_oozie_inst_v_1</value>
<description>
NodeDef default version, _oozie_inst_v_0 or _oozie_inst_v_1
</description>
</property>
<!-- Oozie Authentication -->
<property>
<name>oozie.authentication.type</name>
<value>simple</value>
<description>
Defines authentication used for Oozie HTTP endpoint.
Supported values are: simple | kerberos | #AUTHENTICATION_HANDLER_CLASSNAME#
</description>
</property>
<property>
<name>oozie.server.authentication.type</name>
<value>${oozie.authentication.type}</value>
<description>
Defines authentication used for Oozie server communicating to other Oozie server over HTTP(s).
Supported values are: simple | kerberos | #AUTHENTICATOR_CLASSNAME#
</description>
</property>
<property>
<name>oozie.authentication.token.validity</name>
<value>36000</value>
<description>
Indicates how long (in seconds) an authentication token is valid before it has
to be renewed.
</description>
</property>
<property>
<name>oozie.authentication.cookie.domain</name>
<value></value>
<description>
The domain to use for the HTTP cookie that stores the authentication token.
In order to authentiation to work correctly across multiple hosts
the domain must be correctly set.
</description>
</property>
<property>
<name>oozie.authentication.simple.anonymous.allowed</name>
<value>true</value>
<description>
Indicates if anonymous requests are allowed when using 'simple' authentication.
</description>
</property>
<property>
<name>oozie.authentication.kerberos.principal</name>
<value>HTTP/localhost@${local.realm}</value>
<description>
Indicates the Kerberos principal to be used for HTTP endpoint.
The principal MUST start with 'HTTP/' as per Kerberos HTTP SPNEGO specification.
</description>
</property>
<property>
<name>oozie.authentication.kerberos.keytab</name>
<value>${oozie.service.HadoopAccessorService.keytab.file}</value>
<description>
Location of the keytab file with the credentials for the principal.
Referring to the same keytab file Oozie uses for its Kerberos credentials for Hadoop.
</description>
</property>
<property>
<name>oozie.authentication.kerberos.name.rules</name>
<value>DEFAULT</value>
<description>
The kerberos names rules is to resolve kerberos principal names, refer to Hadoop's
KerberosName for more details.
</description>
</property>
<!-- Coordinator "NONE" execution order default time tolerance -->
<property>
<name>oozie.coord.execution.none.tolerance</name>
<value>1</value>
<description>
Default time tolerance in minutes after action nominal time for an action to be skipped
when execution order is "NONE"
</description>
</property>
<!-- Coordinator Actions default length -->
<property>
<name>oozie.coord.actions.default.length</name>
<value>1000</value>
<description>
Default number of coordinator actions to be retrieved by the info command
</description>
</property>
<!-- ForkJoin validation -->
<property>
<name>oozie.validate.ForkJoin</name>
<value>true</value>
<description>
If true, fork and join should be validated at wf submission time.
</description>
</property>
<property>
<name>oozie.coord.action.get.all.attributes</name>
<value>false</value>
<description>
Setting to true is not recommended as coord job/action info will bring all columns of the action in memory.
Set it true only if backward compatibility for action/job info is required.
</description>
</property>
<property>
<name>oozie.service.HadoopAccessorService.supported.filesystems</name>
<value>hdfs,hftp,webhdfs</value>
<description>
Enlist the different filesystems supported for federation. If wildcard "*" is specified,
then ALL file schemes will be allowed.
</description>
</property>
<property>
<name>oozie.service.URIHandlerService.uri.handlers</name>
<value>org.apache.oozie.dependency.FSURIHandler</value>
<description>
Enlist the different uri handlers supported for data availability checks.
</description>
</property>
<!-- Oozie HTTP Notifications -->
<property>
<name>oozie.notification.url.connection.timeout</name>
<value>10000</value>
<description>
Defines the timeout, in milliseconds, for Oozie HTTP notification callbacks. Oozie does
HTTP notifications for workflow jobs which set the 'oozie.wf.action.notification.url',
'oozie.wf.worklfow.notification.url' and/or 'oozie.coord.action.notification.url'
properties in their job.properties. Refer to section '5 Oozie Notifications' in the
Workflow specification for details.
</description>
</property>
<!-- Enable Distributed Cache workaround for Hadoop 2.0.2-alpha (MAPREDUCE-4820) -->
<property>
<name>oozie.hadoop-2.0.2-alpha.workaround.for.distributed.cache</name>
<value>false</value>
<description>
Due to a bug in Hadoop 2.0.2-alpha, MAPREDUCE-4820, launcher jobs fail to set
the distributed cache for the action job because the local JARs are implicitly
included triggering a duplicate check.
This flag removes the distributed cache files for the action as they'll be
included from the local JARs of the JobClient (MRApps) submitting the action
job from the launcher.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.filter.app.types</name>
<value>workflow_job, coordinator_action</value>
<description>
The app-types among workflow/coordinator/bundle job/action for which
for which events system is enabled.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.event.queue</name>
<value>org.apache.oozie.event.MemoryEventQueue</value>
<description>
The implementation for EventQueue in use by the EventHandlerService.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.event.listeners</name>
<value>org.apache.oozie.jms.JMSJobEventListener</value>
</property>
<property>
<name>oozie.service.EventHandlerService.queue.size</name>
<value>10000</value>
<description>
Maximum number of events to be contained in the event queue.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.worker.interval</name>
<value>30</value>
<description>
The default interval (seconds) at which the worker threads will be scheduled to run
and process events.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.batch.size</name>
<value>10</value>
<description>
The batch size for batched draining per thread from the event queue.
</description>
</property>
<property>
<name>oozie.service.EventHandlerService.worker.threads</name>
<value>3</value>
<description>
Number of worker threads to be scheduled to run and process events.
</description>
</property>
<property>
<name>oozie.sla.service.SLAService.capacity</name>
<value>5000</value>
<description>
Maximum number of sla records to be contained in the memory structure.
</description>
</property>
<property>
<name>oozie.sla.service.SLAService.alert.events</name>
<value>END_MISS</value>
<description>
Default types of SLA events for being alerted of.
</description>
</property>
<property>
<name>oozie.sla.service.SLAService.calculator.impl</name>
<value>org.apache.oozie.sla.SLACalculatorMemory</value>
<description>
The implementation for SLACalculator in use by the SLAService.
</description>
</property>
<property>
<name>oozie.sla.service.SLAService.job.event.latency</name>
<value>90000</value>
<description>
Time in milliseconds to account of latency of getting the job status event
to compare against and decide sla miss/met
</description>
</property>
<property>
<name>oozie.sla.service.SLAService.check.interval</name>
<value>30</value>
<description>
Time interval, in seconds, at which SLA Worker will be scheduled to run
</description>
</property>
<!-- ZooKeeper configuration -->
<property>
<name>oozie.zookeeper.connection.string</name>
<value>localhost:2181</value>
<description>
Comma-separated values of host:port pairs of the ZooKeeper servers.
</description>
</property>
<property>
<name>oozie.zookeeper.namespace</name>
<value>oozie</value>
<description>
The namespace to use. All of the Oozie Servers that are planning on talking to each other should have the same
namespace.
</description>
</property>
<property>
<name>oozie.zookeeper.connection.timeout</name>
<value>180</value>
<description>
Default ZK connection timeout (in sec). If connection is lost for more than timeout, then Oozie server will shutdown
itself if oozie.zookeeper.server.shutdown.ontimeout is true.
</description>
</property>
<property>
<name>oozie.zookeeper.server.shutdown.ontimeout</name>
<value>true</value>
<description>
If true, Oozie server will shutdown itself on ZK
connection timeout.
</description>
</property>
<property>
<name>oozie.http.hostname</name>
<value>localhost</value>
<description>
Oozie server host name.
</description>
</property>
<property>
<name>oozie.http.port</name>
<value>11000</value>
<description>
Oozie server port.
</description>
</property>
<property>
<name>oozie.instance.id</name>
<value>${oozie.http.hostname}</value>
<description>
Each Oozie server should have its own unique instance id. The default is system property
=${OOZIE_HTTP_HOSTNAME}= (i.e. the hostname).
</description>
</property>
<!-- Sharelib Configuration -->
<property>
<name>oozie.service.ShareLibService.mapping.file</name>
<value> </value>
<description>
Sharelib mapping files contains list of key=value,
where key will be the sharelib name for the action and value is a comma separated list of
DFS directories or jar files.
Example.
oozie.pig_10=hdfs:///share/lib/pig/pig-0.10.1/lib/
oozie.pig=hdfs:///share/lib/pig/pig-0.11.1/lib/
oozie.distcp=hdfs:///share/lib/hadoop-2.2.0/share/hadoop/tools/lib/hadoop-distcp-2.2.0.jar
</description>
</property>
<property>
<name>oozie.service.ShareLibService.fail.fast.on.startup</name>
<value>false</value>
<description>
Fails server starup if sharelib initilzation fails.
</description>
</property>
<property>
<name>oozie.service.ShareLibService.purge.interval</name>
<value>1</value>
<description>
How often, in days, Oozie should check for old ShareLibs and LauncherLibs to purge from HDFS.
</description>
</property>
<property>
<name>oozie.service.ShareLibService.temp.sharelib.retention.days</name>
<value>7</value>
<description>
ShareLib retention time in days.
</description>
</property>
<property>
<name>oozie.action.ship.launcher.jar</name>
<value>false</value>
<description>
Specifies whether launcher jar is shipped or not.
</description>
</property>
<property>
<name>oozie.action.jobinfo.enable</name>
<value>false</value>
<description>
JobInfo will contain information of bundle, coordinator, workflow and actions. If enabled, hadoop job will have
property(oozie.job.info) which value is multiple key/value pair separated by ",". This information can be used for
analytics like how many oozie jobs are submitted for a particular period, what is the total number of failed pig jobs,
etc from mapreduce job history logs and configuration.
User can also add custom workflow property to jobinfo by adding property which prefix with "oozie.job.info."
Eg.
oozie.job.info="bundle.id=,bundle.name=,coord.name=,coord.nominal.time=,coord.name=,wf.id=,
wf.name=,action.name=,action.type=,launcher=true"
</description>
</property>
<property>
<name>oozie.service.XLogStreamingService.max.log.scan.duration</name>
<value>-1</value>
<description>
Max log scan duration in hours. If log scan request end_date - start_date > value,
then exception is thrown to reduce the scan duration. -1 indicate no limit.
</description>
</property>
<property>
<name>oozie.service.XLogStreamingService.actionlist.max.log.scan.duration</name>
<value>-1</value>
<description>
Max log scan duration in hours for coordinator job when list of actions are specified.
If log streaming request end_date - start_date > value, then exception is thrown to reduce the scan duration.
-1 indicate no limit.
This setting is separate from max.log.scan.duration as we want to allow higher durations when actions are specified.
</description>
</property>
<!-- JvmPauseMonitorService Configuration -->
<property>
<name>oozie.service.JvmPauseMonitorService.warn-threshold.ms</name>
<value>10000</value>
<description>
The JvmPauseMonitorService runs a thread that repeatedly tries to detect when the JVM pauses, which could indicate
that the JVM or host machine is overloaded or other problems. This thread sleeps for 500ms; if it sleeps for
significantly longer, then there is likely a problem. This property specifies the threadshold for when Oozie should log
a WARN level message; there is also a counter named "jvm.pause.warn-threshold".
</description>
</property>
<property>
<name>oozie.service.JvmPauseMonitorService.info-threshold.ms</name>
<value>1000</value>
<description>
The JvmPauseMonitorService runs a thread that repeatedly tries to detect when the JVM pauses, which could indicate
that the JVM or host machine is overloaded or other problems. This thread sleeps for 500ms; if it sleeps for
significantly longer, then there is likely a problem. This property specifies the threadshold for when Oozie should log
an INFO level message; there is also a counter named "jvm.pause.info-threshold".
</description>
</property>
<property>
<name>oozie.service.ZKLocksService.locks.reaper.threshold</name>
<value>300</value>
<description>
The frequency at which the ChildReaper will run.
Duration should be in sec. Default is 5 min.
</description>
</property>
<property>
<name>oozie.service.ZKLocksService.locks.reaper.threads</name>
<value>2</value>
<description>
Number of fixed threads used by ChildReaper to
delete empty locks.
</description>
</property>
<property>
<name>oozie.service.AbandonedCoordCheckerService.check.interval
</name>
<value>1440</value>
<description>
Interval, in minutes, at which AbandonedCoordCheckerService should run.
</description>
</property>
<property>
<name>oozie.service.AbandonedCoordCheckerService.check.delay
</name>
<value>60</value>
<description>
Delay, in minutes, at which AbandonedCoordCheckerService should run.
</description>
</property>
<property>
<name>oozie.service.AbandonedCoordCheckerService.failure.limit
</name>
<value>25</value>
<description>
Failure limit. A job is considered to be abandoned/faulty if total number of actions in
failed/timedout/suspended >= "Failure limit" and there are no succeeded action.
</description>
</property>
<property>
<name>oozie.service.AbandonedCoordCheckerService.kill.jobs
</name>
<value>false</value>
<description>
If true, AbandonedCoordCheckerService will kill abandoned coords.
</description>
</property>
<property>
<name>oozie.service.AbandonedCoordCheckerService.job.older.than</name>
<value>2880</value>
<description>
In minutes, job will be considered as abandoned/faulty if job is older than this value.
</description>
</property>
<property>
<name>oozie.notification.proxy</name>
<value></value>
<description>
System level proxy setting for job notifications.
</description>
</property>
<property>
<name>oozie.wf.rerun.disablechild</name>
<value>false</value>
<description>
By setting this option, workflow rerun will be disabled if parent workflow or coordinator exist and
it will only rerun through parent.
</description>
</property>
<property>
<name>oozie.service.PauseTransitService.callable.batch.size
</name>
<value>10</value>
<description>
This value determines the number of callable which will be batched together
to be executed by a single thread.
</description>
</property>
<!-- XConfiguration -->
<property>
<name>oozie.configuration.substitute.depth</name>
<value>20</value>
<description>
This value determines the depth of substitution in configurations.
If set -1, No limitation on substitution.
</description>
</property>
<property>
<name>oozie.service.SparkConfigurationService.spark.configurations</name>
<value>*=spark-conf</value>
<description>
Comma separated AUTHORITY=SPARK_CONF_DIR, where AUTHORITY is the HOST:PORT of
the ResourceManager of a YARN cluster. The wildcard '*' configuration is
used when there is no exact match for an authority. The SPARK_CONF_DIR contains
the relevant spark-defaults.conf properties file. If the path is relative is looked within
the Oozie configuration directory; though the path can be absolute. This is only used
when the Spark master is set to either "yarn-client" or "yarn-cluster".
</description>
</property>
<property>
<name>oozie.service.SparkConfigurationService.spark.configurations.ignore.spark.yarn.jar</name>
<value>true</value>
<description>
If true, Oozie will ignore the "spark.yarn.jar" property from any Spark configurations specified in
oozie.service.SparkConfigurationService.spark.configurations. If false, Oozie will not ignore it. It is recommended
to leave this as true because it can interfere with the jars in the Spark sharelib.
</description>
</property>
<property>
<name>oozie.email.attachment.enabled</name>
<value>true</value>
<description>
This value determines whether to support email attachment of a file on HDFS.
Set it false if there is any security concern.
</description>
</property>
<property>
<name>oozie.actions.default.name-node</name>
<value> </value>
<description>
The default value to use for the <name-node> element in applicable action types. This value will be used when
neither the action itself nor the global section specifies a <name-node>. As expected, it should be of the form
"hdfs://HOST:PORT".
</description>
</property>
<property>
<name>oozie.actions.default.job-tracker</name>
<value> </value>
<description>
The default value to use for the <job-tracker> element in applicable action types. This value will be used when
neither the action itself nor the global section specifies a <job-tracker>. As expected, it should be of the form
"HOST:PORT".
</description>
</property>
</configuration>
![复制代码]()
注意： 我们要oozie-sharelib-4.1.0-cdh5.5.4-yarn.tar.gz ，不要oozie-sharelib-4.1.0-cdh5.5.4.tar.gz。
然后，现在，/user/hadoop/下，有了 /user/hadoop/share/lib/lib_20170508192944（注意这个时间，是刚执行那一刻时间命名的）
