CentOS7.X安装php-7.x.x
安装php
-
安装准备
yum install \ vim \ gcc \ gcc-c++ \ wget \ make \ re2c \ libtool \ automake \ autoconf \ curl-devel \ libpng-devel \ libxml2-devel \ libxslt-devel \ openssl-devel \ freetype-devel \ bzip2-devel \ libicu-devel \ libuuid-devel \ libmcrypt-devel \ postgresql-devel \ -y -
安装php
cd /root wget http://cn2.php.net/distributions/php-7.2.6.tar.gz tar -zxvf php-7.2.6.tar.gz cd php-7.2.6 ./configure \ --prefix=/usr/local/php \ --enable-mysqlnd \ --with-openssl \ --enable-fpm # 如果在/usr/local/apache/路径下安装了apache并且想让php运行在apache下,需要加上: # --with-apxs2=/usr/local/apache/bin/apxs # 或 --with-apxs2=/usr/local/apache/bin/apxs2 # apxs在有些apache发行版中已经改名为apxs2 make make install # 如果在/usr/local/apache/路径下安装了apache并且想让php运行在apache下,apache不需要重新编译 # 这时候/usr/local/apache/modules/下多了一个libphp7.so文件 # 编辑/etc/httpd/httpd.conf添加如下行: LoadModule php7_module modules/libphp7.so DocumentRoot "/www" <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> # 编辑/www/index.php添加如下行: <?php phpinfo(); # 重启apache # 访问http://xxx.xxx.xxx.xxx/index.php -
生成php.ini、php-fpm.conf、www.conf
# 检查php.ini是否正确放置（只需要第一行不为none） /usr/local/php/bin/php --ini 部署环境执行： cp ./php.ini-production /usr/local/php/lib/php.ini 开发环境执行： cp ./php.ini-development /usr/local/php/lib/php.ini # 拷贝php-fpm.conf cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf # PHP7才执行(PHP5中，www.conf的配置项在php-fpm.conf) cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf -
php.ini常规配置
# 下载cacert.pem cd /usr/local/php/lib wget https://curl.haxx.se/ca/cacert.pem vim /usr/local/php/lib/php.ini ;php版本信息隐藏 expose_php=Off ;防止显示php错误输出,Off: 不输出但存入日志 display_errors=Off ;防止用户将可执行文件伪装成静态文件(如图片、文档)上传后，通过访问WEB页面执行该文件 cgi.fix_pathinfo=0 ;允许上传单个文件最大20M upload_max_filesize=20M ;session.name如果自己开发程序可以改,但如果是部署已有项目,修改后可能导致session相关功能异常 session.name=self_key ;每请求10次session的key,检查1次key是否需要过期删除 session.gc_probability=1 session.gc_divisor=1000 ;设置session默认5分钟(300秒)过期 session.gc_maxlifetime=1440 ;时区中国上海 date.timezone=Asia/Shanghai ;curl、openssl配置cacert.pem curl.cainfo=/usr/local/php/lib/cacert.pem openssl.cafile=/usr/local/php/lib/cacert.pem ESC :wq -
配置php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf pid=run/php-fpm.pid error_log=log/php-fpm.log # 如开启该配置↓,下一步不可跳过 rlimit_files=51200 ESC :wq -
调整最大文件打开数(数值仅供参考,如上一步骤未配置rlimit_files,本步可跳过)
# 在文件末尾添加 vim /etc/security/limits.conf * soft nproc 65535 * hard nproc 65535 * soft nofile 65535 * hard nofile 65535 ESC :wq -
配置www.conf(内存较大、较小两套方案)
vim /usr/local/php/etc/php-fpm.d/www.conf user=www group=www # 静态分配子进程(内存1G,计划为php分配 640M 内存) pm=static pm.max_children=20 pm.start_servers=15 pm.min_spare_servers=10 pm.max_spare_servers=20 pm.process_idle_timeout=10s pm.max_requests=500 slowlog=log/$pool.log.slow php_admin_value[memory_limit]=32M # 动态分配子进程(内存1G,计划为php分配 640M 内存) pm=dynamic pm.max_children=20 pm.start_servers=15 pm.min_spare_servers=10 pm.max_spare_servers=20 pm.process_idle_timeout=10s pm.max_requests=500 slowlog=log/$pool.log.slow php_admin_value[memory_limit]=32M ESC :wq # 以下配置仅供了解,不建议这样使用 listen=127.0.0.1:9000 若改为 listen=/usr/local/php/var/run/php-fpm.sock 则nginx配置 fastcgi_pass 127.0.0.1:9000; 要改为 fastcgi_pass unix:/usr/local/php/var/run/php-fpm.sock; -
将php加入环境变量
vim /etc/profile export PATH=$PATH:/usr/local/php/bin ESC :wq source /etc/profile -
安装composer
# 下载(需要先安装zlib扩展) cd /usr/local/php/bin curl -sS https://getcomposer.org/installer | /usr/local/php/bin/php mv ./composer.phar ./composer composer -V -
启动php并设置开机启动
# 添加www用户 useradd www mkdir /www chown -R www:www /www chown -R www:www /usr/local/php # 进入单元文件目录 cd /etc/systemd/system vim php7.service [Unit] Description=Start php7 on boot. After=network.target [Service] User=root Group=root Type=forking ExecStart=/usr/local/php/sbin/php-fpm ExecReload=/bin/kill -USR2 `cat /usr/local/php/var/run/php-fpm.pid` ExecStop=/bin/kill -INT `cat /usr/local/php/var/run/php-fpm.pid` PrivateTmp=true [Install] WantedBy=multi-user.target ESC :wq # 修改文件权限为只有root用户可以编辑该文件 chown -R root:root /etc/systemd/system/php7.service chmod -R 644 /etc/systemd/system/php7.service # 更新systemd systemctl daemon-reload systemctl enable php7 systemctl start php7 -
查看运行情况
# 查看主进程、子进程 ps aux | grep php-fpm # 查看pid文件(存在即成功) ll /usr/local/php/var/run/ -
php进程操作
# 平滑关闭 kill -INT `cat /usr/local/php/var/run/php-fpm.pid` # 平滑重启 kill -USR2 `cat /usr/local/php/var/run/php-fpm.pid` -
安装php扩展
cd /root/php-7.2.6/ext/xxxx /usr/local/php/bin/phpize ----------------------------------------------------------- | phpize时注意如下: | 这里如果说没发现config.m4 | cp ./config0.m4 ./config.m4 ----------------------------------------------------------- ./configure --with-php-config=/usr/local/php/bin/php-config ----------------------------------------------------------- | 安装GD库configure时注意如下: | 这里为了排版加了'|',按住Alt键选取吧... | yum install \ | libXpm-devel \ | libpng-devel \ | libjpeg-devel \ | libwebp-devel \ | -y \ | | ./configure \ | --with-xpm-dir \ | --with-png-dir \ | --with-jpeg-dir \ | --with-webp-dir \ | --with-zlib-dir \ | --with-freetype-dir \ ----------------------------------------------------------- make ----------------------------------------------------------- | make注意如下: | 重复安装PHP预编译的扩展,会报错 | Installing shared extensions: | /usr/local/php/lib/php/extensions/no-debug-non-zts-20151012/ | cp: cannot stat 'modules/*': No such file or directory | make: *** [install-modules] Error 1 | 所以不要重复安装,通过 php -m 查看已经安装的扩展。 ----------------------------------------------------------- ----------------------------------------------------------- | 这里注意,安装mcrypt要先安装libmcrypt(有些版本Linux系统) | cd /usr/local/src | wget ftp://mcrypt.hellug.gr/pub/crypto/mcrypt/libmcrypt/libmcrypt-2.5.7.tar.gz | cd libmcrypt-2.5.7 | ./configure | make | make install ----------------------------------------------------------- make install vim /usr/local/php/lib/php.ini extension=xxxx.so ESC :wq Zend扩展: ----------------------------------------------------------- | 设置opcache.max_accelerated_files时 | 先执行以下命令来获取php文件数 | find . -type f -print | grep php | wc -l | 然后在以下质数集合中，找到一个恰好比该值大的值 | 223, 463, 983, 1979, 3907, 7963, 16229, 32531, 65407, 130987 | opcache安装,配置php.ini: | | zend_extension=opcache.so | opcache.enable_cli=1 | opcache.memory_consumption=256 | opcache.interned_strings_buffer=16 | opcache.max_accelerated_files=32531 | opcache.validate_timestamps=1 | opcache.revalidate_freq=60 | opcache.fast_shutdown=1 ----------------------------------------------------------- - ZendOpcache的最佳设置参考链接
-
常用扩展('-'表示可能已经安装的扩展,安装前检查已安装扩展,防止重复安装)
bcmath - ctype curl - date - fileinfo gd - hash - iconv intl - json mbstring mcrypt - mysqlnd - openssl - pcre - PDO pdo_mysql pdo_pgsql sockets zip zlib mongo (wget http://pecl.php.net/get/mongo-1.6.14.tgz [php7.x.x不再需要]) mongodb (wget http://pecl.php.net/get/mongodb-1.2.9.tgz) redis (wget http://pecl.php.net/get/redis-3.1.2.tgz) uuid (wget http://pecl.php.net/get/uuid-1.0.4.tgz) fastcommon (见FastDFS安装) fastdfs_client (见FastDFS安装) Zend: opcache (文档地址: http://php.net/manual/zh/opcache.installation.php) -
php重新编译
cd /root/php-7.2.6 make distclean ./configure \ --prefix=/usr/local/php \ --enable-mysqlnd \ --with-openssl \ --enable-fpm \ make make install - 领支付宝红包支持作者
![扫码领支付宝红包]( "扫码领支付宝红包")
