Issues

Docker is a relatively new project and is active being developed and tested by a thriving community of developers and testers and every release of docker features many enhancements and bugfixes.

Given the nature of the development and release cycle it is very important that you have the latest version of docker installed because any issue that you encounter might have already been fixed with a newer docker release.

Install the most recent version of the Docker Engine for your platform using the official Docker releases, which can also be installed using:

wget -qO- https://get.docker.com/ | sh

Fedora and RHEL/CentOS users should try disabling selinux with setenforce 0 and check if resolves the issue. If it does than there is not much that I can help you with. You can either stick with selinux disabled (not recommended by redhat) or switch to using ubuntu.

You may also set DEBUG=true to enable debugging of the entrypoint script, which could help you pin point any configuration issues.

If using the latest docker version and/or disabling selinux does not fix the issue then please file a issue request on the issuespage.

In your issue report please make sure you provide the following information:

• The host distribution and release version.
• Output of the docker version command
• Output of the docker info command
• The docker run command you used to run the image (mask out the sensitive bits).

Prerequisites

Your docker host needs to have 1GB or more of available RAM to run GitLab. Please refer to the GitLab hardware requirementsdocumentation for additional information.

Installation

Automated builds of the image are available on Dockerhub and is the recommended method of installation.

Note: Builds are also available on Quay.io

docker pull sameersbn/gitlab:8.5.1

You can also pull the latest tag which is built from the repository HEAD

docker pull sameersbn/gitlab:latest

Alternatively you can build the image locally.

docker build -t sameersbn/gitlab github.com/sameersbn/docker-gitlab

Quick Start

The quickest way to get started is using docker-compose.

wget https://raw.githubusercontent.com/sameersbn/docker-gitlab/master/docker-compose.yml

Generate a random string and assign to GITLAB_SECRETS_DB_KEY_BASE environment variable. Once set you should not change this value and ensure you backup this value.

Tip: You can generate a random string using pwgen -Bsv1 64 and assign it as the value ofGITLAB_SECRETS_DB_KEY_BASE.

Start GitLab using:

docker-compose up

Alternatively, you can manually launch the gitlab container and the supporting postgresql and redis containers by following this three step guide.

Step 1. Launch a postgresql container

docker run --name gitlab-postgresql -d \
    --env 'DB_NAME=gitlabhq_production' \
    --env 'DB_USER=gitlab' --env 'DB_PASS=password' \ --volume /srv/docker/gitlab/postgresql:/var/lib/postgresql \ sameersbn/postgresql:9.4-13

Step 2. Launch a redis container

docker run --name gitlab-redis -d \
    --volume /srv/docker/gitlab/redis:/var/lib/redis \
    sameersbn/redis:latest

Step 3. Launch the gitlab container

docker run --name gitlab -d \
    --link gitlab-postgresql:postgresql --link gitlab-redis:redisio \
    --publish 10022:22 --publish 10080:80 \
    --env 'GITLAB_PORT=10080' --env 'GITLAB_SSH_PORT=10022' \ --env 'GITLAB_SECRETS_DB_KEY_BASE=long-and-random-alpha-numeric-string' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

Please refer to Available Configuration Parameters to understand GITLAB_PORT and other configuration options

NOTE: Please allow a couple of minutes for the GitLab application to start.

Point your browser to http://localhost:10080 and login using the default username and password:

• username: root
• password: 5iveL!fe

You should now have the GitLab application up and ready for testing. If you want to use this image in production the please read on.

The rest of the document will use the docker command line. You can quite simply adapt your configuration into a docker-compose.yml file if you wish to do so.

Configuration

Data Store

GitLab is a code hosting software and as such you don't want to lose your code when the docker container is stopped/deleted. To avoid losing any data, you should mount a volume at,

• /home/git/data

SELinux users are also required to change the security context of the mount point so that it plays nicely with selinux.

mkdir -p /srv/docker/gitlab/gitlab
sudo chcon -Rt svirt_sandbox_file_t /srv/docker/gitlab/gitlab

Volumes can be mounted in docker by specifying the -v option in the docker run command.

docker run --name gitlab -d \
    --volume /srv/docker/gitlab/gitlab:/home/git/data \
    sameersbn/gitlab:8.5.1

Database

GitLab uses a database backend to store its data. You can configure this image to use either MySQL or PostgreSQL.

Note: GitLab HQ recommends using PostgreSQL over MySQL

PostgreSQL

External PostgreSQL Server

The image also supports using an external PostgreSQL Server. This is also controlled via environment variables.

CREATE ROLE gitlab with LOGIN CREATEDB PASSWORD 'password';
CREATE DATABASE gitlabhq_production; GRANT ALL PRIVILEGES ON DATABASE gitlabhq_production to gitlab;

We are now ready to start the GitLab application.

Assuming that the PostgreSQL server host is 192.168.1.100

docker run --name gitlab -d \
    --env 'DB_ADAPTER=postgresql' --env 'DB_HOST=192.168.1.100' \ --env 'DB_NAME=gitlabhq_production' \ --env 'DB_USER=gitlab' --env 'DB_PASS=password' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

Linking to PostgreSQL Container

You can link this image with a postgresql container for the database requirements. The alias of the postgresql server container should be set to postgresql while linking with the gitlab image.

If a postgresql container is linked, only the DB_ADAPTER, DB_HOST and DB_PORT settings are automatically retrieved using the linkage. You may still need to set other database connection parameters such as the DB_NAME, DB_USER, DB_PASS and so on.

To illustrate linking with a postgresql container, we will use the sameersbn/postgresql image. When using postgresql image in production you should mount a volume for the postgresql data store. Please refer the README of docker-postgresql for details.

First, lets pull the postgresql image from the docker index.

docker pull sameersbn/postgresql:9.4-13

For data persistence lets create a store for the postgresql and start the container.

SELinux users are also required to change the security context of the mount point so that it plays nicely with selinux.

mkdir -p /srv/docker/gitlab/postgresql
sudo chcon -Rt svirt_sandbox_file_t /srv/docker/gitlab/postgresql

The run command looks like this.

docker run --name gitlab-postgresql -d \
    --env 'DB_NAME=gitlabhq_production' \
    --env 'DB_USER=gitlab' --env 'DB_PASS=password' \ --volume /srv/docker/gitlab/postgresql:/var/lib/postgresql \ sameersbn/postgresql:9.4-13

The above command will create a database named gitlabhq_production and also create a user named gitlab with the password password with access to the gitlabhq_production database.

We are now ready to start the GitLab application.

docker run --name gitlab -d --link gitlab-postgresql:postgresql \
    --volume /srv/docker/gitlab/gitlab:/home/git/data \
    sameersbn/gitlab:8.5.1

Here the image will also automatically fetch the DB_NAME, DB_USER and DB_PASS variables from the postgresql container as they are specified in the docker run command for the postgresql container. This is made possible using the magic of docker links and works with the following images:

• postgresql
• sameersbn/postgresql
• orchardup/postgresql
• paintedfox/postgresql

MySQL

Internal MySQL Server

The internal mysql server has been removed from the image. Please use a linked mysql container or specify a connection to aexternal mysql server.

If you have been using the internal mysql server follow these instructions to migrate to a linked mysql container:

Assuming that your mysql data is available at /srv/docker/gitlab/mysql

docker run --name gitlab-mysql -d \
    --volume /srv/docker/gitlab/mysql:/var/lib/mysql \
    sameersbn/mysql:latest

This will start a mysql container with your existing mysql data. Now login to the mysql container and create a user for the existinggitlabhq_production database.

All you need to do now is link this mysql container to the gitlab ci container using the --link gitlab-mysql:mysql option and provide the DB_NAME, DB_USER and DB_PASS parameters.

Refer to Linking to MySQL Container for more information.

External MySQL Server

The image can be configured to use an external MySQL database. The database configuration should be specified using environment variables while starting the GitLab image.

Before you start the GitLab image create user and database for gitlab.

CREATE USER 'gitlab'@'%.%.%.%' IDENTIFIED BY 'password'; CREATE DATABASE IF NOT EXISTS `gitlabhq_production` DEFAULT CHARACTER SET `utf8` COLLATE `utf8_unicode_ci`; GRANT ALL PRIVILEGES ON `gitlabhq_production`.* TO 'gitlab'@'%.%.%.%';

We are now ready to start the GitLab application.

Assuming that the mysql server host is 192.168.1.100

docker run --name gitlab -d \
    --env 'DB_ADAPTER=mysql2' --env 'DB_HOST=192.168.1.100' \ --env 'DB_NAME=gitlabhq_production' \ --env 'DB_USER=gitlab' --env 'DB_PASS=password' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

Linking to MySQL Container

You can link this image with a mysql container for the database requirements. The alias of the mysql server container should be set to mysql while linking with the gitlab image.

If a mysql container is linked, only the DB_ADAPTER, DB_HOST and DB_PORT settings are automatically retrieved using the linkage. You may still need to set other database connection parameters such as the DB_NAME, DB_USER, DB_PASS and so on.

To illustrate linking with a mysql container, we will use the sameersbn/mysql image. When using docker-mysql in production you should mount a volume for the mysql data store. Please refer the README of docker-mysql for details.

First, lets pull the mysql image from the docker index.

docker pull sameersbn/mysql:latest

For data persistence lets create a store for the mysql and start the container.

SELinux users are also required to change the security context of the mount point so that it plays nicely with selinux.

mkdir -p /srv/docker/gitlab/mysql
sudo chcon -Rt svirt_sandbox_file_t /srv/docker/gitlab/mysql

The run command looks like this.

docker run --name gitlab-mysql -d \
    --env 'DB_NAME=gitlabhq_production' \
    --env 'DB_USER=gitlab' --env 'DB_PASS=password' \ --volume /srv/docker/gitlab/mysql:/var/lib/mysql \ sameersbn/mysql:latest

The above command will create a database named gitlabhq_production and also create a user named gitlab with the password password with full/remote access to the gitlabhq_production database.

We are now ready to start the GitLab application.

docker run --name gitlab -d --link gitlab-mysql:mysql \
    --volume /srv/docker/gitlab/gitlab:/home/git/data \
    sameersbn/gitlab:8.5.1

Here the image will also automatically fetch the DB_NAME, DB_USER and DB_PASS variables from the mysql container as they are specified in the docker run command for the mysql container. This is made possible using the magic of docker links and works with the following images:

• mysql
• sameersbn/mysql
• centurylink/mysql
• orchardup/mysql

Redis

GitLab uses the redis server for its key-value data store. The redis server connection details can be specified using environment variables.

Internal Redis Server

The internal redis server has been removed from the image. Please use a linked redis container or specify a external redisconnection.

External Redis Server

The image can be configured to use an external redis server. The configuration should be specified using environment variables while starting the GitLab image.

Assuming that the redis server host is 192.168.1.100

docker run --name gitlab -it --rm \
    --env 'REDIS_HOST=192.168.1.100' --env 'REDIS_PORT=6379' \ sameersbn/gitlab:8.5.1

Linking to Redis Container

You can link this image with a redis container to satisfy gitlab's redis requirement. The alias of the redis server container should be set to redisio while linking with the gitlab image.

To illustrate linking with a redis container, we will use the sameersbn/redis image. Please refer the README of docker-redis for details.

First, lets pull the redis image from the docker index.

docker pull sameersbn/redis:latest

Lets start the redis container

docker run --name gitlab-redis -d \
    --volume /srv/docker/gitlab/redis:/var/lib/redis \
    sameersbn/redis:latest

We are now ready to start the GitLab application.

docker run --name gitlab -d --link gitlab-redis:redisio \
    sameersbn/gitlab:8.5.1

Mail

The mail configuration should be specified using environment variables while starting the GitLab image. The configuration defaults to using gmail to send emails and requires the specification of a valid username and password to login to the gmail servers.

If you are using Gmail then all you need to do is:

docker run --name gitlab -d \
    --env 'SMTP_USER=USER@gmail.com' --env 'SMTP_PASS=PASSWORD' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.0.0

Please refer the Available Configuration Parameters section for the list of SMTP parameters that can be specified.

Reply by email

Since version 8.0.0 GitLab adds support for commenting on issues by replying to emails. Please read the documentation on reply by email to understand the requirements of this feature.

To enable this feature you need to provide IMAP configuration parameters that will allow GitLab to connect to your mail server and read mails. Additionally, you may need to specify GITLAB_INCOMING_EMAIL_ADDRESS if your incoming email address is not the same as the IMAP_USER.

If you are using Gmail then all you need to do is:

docker run --name gitlab -d \
    --env 'IMAP_USER=USER@gmail.com' --env 'IMAP_PASS=PASSWORD' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

Please refer the Available Configuration Parameters section for the list of IMAP parameters that can be specified.

SSL

Access to the gitlab application can be secured using SSL so as to prevent unauthorized access to the data in your repositories. While a CA certified SSL certificate allows for verification of trust via the CA, a self signed certificates can also provide an equal level of trust verification as long as each client takes some additional steps to verify the identity of your website. I will provide instructions on achieving this towards the end of this section.

Jump to the Using HTTPS with a load balancer section if you are using a load balancer such as hipache, haproxy or nginx.

To secure your application via SSL you basically need two things:

• Private key (.key)
• SSL certificate (.crt)

When using CA certified certificates, these files are provided to you by the CA. When using self-signed certificates you need to generate these files yourself. Skip to Strengthening the server security section if you are armed with CA certified SSL certificates.

Generation of Self Signed Certificates

Generation of self-signed SSL certificates involves a simple 3 step procedure.

STEP 1: Create the server private key

openssl genrsa -out gitlab.key 2048

STEP 2: Create the certificate signing request (CSR)

openssl req -new -key gitlab.key -out gitlab.csr

STEP 3: Sign the certificate using the private key and CSR

openssl x509 -req -days 3650 -in gitlab.csr -signkey gitlab.key -out gitlab.crt

Congratulations! you have now generated an SSL certificate that will be valid for 10 years.

Strengthening the server security

This section provides you with instructions to strengthen your server security. To achieve this we need to generate stronger DHE parameters.

openssl dhparam -out dhparam.pem 2048

Installation of the SSL Certificates

Out of the four files generated above, we need to install the gitlab.key, gitlab.crt and dhparam.pem files at the gitlab server. The CSR file is not needed, but do make sure you safely backup the file (in case you ever need it again).

The default path that the gitlab application is configured to look for the SSL certificates is at /home/git/data/certs, this can however be changed using the SSL_KEY_PATH, SSL_CERTIFICATE_PATH and SSL_DHPARAM_PATH configuration options.

If you remember from above, the /home/git/data path is the path of the data store, which means that we have to create a folder named certs/ inside /srv/docker/gitlab/gitlab/ and copy the files into it and as a measure of security we'll update the permission on the gitlab.key file to only be readable by the owner.

mkdir -p /srv/docker/gitlab/gitlab/certs
cp gitlab.key /srv/docker/gitlab/gitlab/certs/
cp gitlab.crt /srv/docker/gitlab/gitlab/certs/
cp dhparam.pem /srv/docker/gitlab/gitlab/certs/
chmod 400 /srv/docker/gitlab/gitlab/certs/gitlab.key

Great! we are now just one step away from having our application secured.

Enabling HTTPS support

HTTPS support can be enabled by setting the GITLAB_HTTPS option to true. Additionally, when using self-signed SSL certificates you need to the set SSL_SELF_SIGNED option to true as well. Assuming we are using self-signed certificates

docker run --name gitlab -d \
    --publish 10022:22 --publish 10080:80 --publish 10443:443 \
    --env 'GITLAB_SSH_PORT=10022' --env 'GITLAB_PORT=10443' \ --env 'GITLAB_HTTPS=true' --env 'SSL_SELF_SIGNED=true' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

In this configuration, any requests made over the plain http protocol will automatically be redirected to use the https protocol. However, this is not optimal when using a load balancer.

Configuring HSTS

HSTS if supported by the browsers makes sure that your users will only reach your sever via HTTPS. When the user comes for the first time it sees a header from the server which states for how long from now this site should only be reachable via HTTPS - that's the HSTS max-age value.

With NGINX_HSTS_MAXAGE you can configure that value. The default value is 31536000 seconds. If you want to disable a already sent HSTS MAXAGE value, set it to 0.

docker run --name gitlab -d \
 --env 'GITLAB_HTTPS=true' --env 'SSL_SELF_SIGNED=true' \ --env 'NGINX_HSTS_MAXAGE=2592000' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

If you want to completely disable HSTS set NGINX_HSTS_ENABLED to false.

Using HTTPS with a load balancer

Load balancers like nginx/haproxy/hipache talk to backend applications over plain http and as such the installation of ssl keys and certificates are not required and should NOT be installed in the container. The SSL configuration has to instead be done at the load balancer.

However, when using a load balancer you MUST set GITLAB_HTTPS to true. Additionally you will need to set theSSL_SELF_SIGNED option to true if self signed SSL certificates are in use.

With this in place, you should configure the load balancer to support handling of https requests. But that is out of the scope of this document. Please refer to Using SSL/HTTPS with HAProxy for information on the subject.

When using a load balancer, you probably want to make sure the load balancer performs the automatic http to https redirection. Information on this can also be found in the link above.

In summation, when using a load balancer, the docker command would look for the most part something like this:

docker run --name gitlab -d \
    --publish 10022:22 --publish 10080:80 \
    --env 'GITLAB_SSH_PORT=10022' --env 'GITLAB_PORT=443' \ --env 'GITLAB_HTTPS=true' --env 'SSL_SELF_SIGNED=true' \ --volume /srv/docker/gitlab/gitlab:/home/git/data \ sameersbn/gitlab:8.5.1

Again, drop the --env 'SSL_SELF_SIGNED=true' option if you are using CA certified SSL certificates.

In case Gitlab responds to any kind of POST request (login, OAUTH, changing settings etc.) with a 422 HTTP Error, consider adding this to your reverse proxy configuration:

proxy_set_header X-Forwarded-Ssl on; (nginx format)

Establishing trust with your server

This section deals will self-signed ssl certificates. If you are using CA certified certificates, your done.

This section is more of a client side configuration so as to add a level of confidence at the client to be 100 percent sure they are communicating with whom they think they.

This is simply done by adding the servers certificate into their list of trusted certificates. On ubuntu, this is done by copying thegitlab.crt file to /usr/local/share/ca-certificates/ and executing update-ca-certificates.

Again, this is a client side configuration which means that everyone who is going to communicate with the server should perform this configuration on their machine. In short, distribute the gitlab.crt file among your developers and ask them to add it to their list of trusted ssl certificates. Failure to do so will result in errors that look like this:

git clone https://git.local.host/gitlab-ce.git
fatal: unable to access 'https://git.local.host/gitlab-ce.git': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

You can do the same at the web browser. Instructions for installing the root certificate for firefox can be found here. You will find similar options chrome, just make sure you install the certificate under the authorities tab of the certificate manager dialog.

There you have it, thats all there is to it.

Installing Trusted SSL Server Certificates

If your GitLab CI server is using self-signed SSL certificates then you should make sure the GitLab CI server certificate is trusted on the GitLab server for them to be able to talk to each other.

The default path image is configured to look for the trusted SSL certificates is at /home/git/data/certs/ca.crt, this can however be changed using the SSL_CA_CERTIFICATES_PATH configuration option.

Copy the ca.crt file into the certs directory on the datastore. The ca.crt file should contain the root certificates of all the servers you want to trust. With respect to GitLab CI, this will be the contents of the gitlab_ci.crt file as described in the READMEof the docker-gitlab-ci container.

By default, our own server certificate gitlab.crt is added to the trusted certificates list.

Deploy to a subdirectory (relative url root)

By default GitLab expects that your application is running at the root (eg. /). This section explains how to run your application inside a directory.

Let's assume we want to deploy our application to '/git'. GitLab needs to know this directory to generate the appropriate routes. This can be specified using the GITLAB_RELATIVE_URL_ROOT configuration option like so:

docker run --name gitlab -it --rm \
    --env 'GITLAB_RELATIVE_URL_ROOT=/git' \
    --volume /srv/docker/gitlab/gitlab:/home/git/data \
    sameersbn/gitlab:8.5.1

GitLab will now be accessible at the /git path, e.g. http://www.example.com/git.

Note: The GITLAB_RELATIVE_URL_ROOT parameter should always begin with a slash and SHOULD NOT have any trailing slashes.

OmniAuth Integration

GitLab leverages OmniAuth to allow users to sign in using Twitter, GitHub, and other popular services. Configuring OmniAuth does not prevent standard GitLab authentication or LDAP (if configured) from continuing to work. Users can choose to sign in using any of the configured mechanisms.

Refer to the GitLab documentation for additional information.

CAS3

To enable the CAS OmniAuth provider you must register your application with your CAS instance. This requires the service URL GitLab will supply to CAS. It should be something like: https://git.example.com:443/users/auth/cas3/callback?url. By default handling for SLO is enabled, you only need to configure CAS for backchannel logout.

For example, if your cas server url is https://sso.example.com, then adding --env 'OAUTH_CAS3_SERVER=https://sso.example.com' to the docker run command enables support for CAS3 OAuth. Please refer toAvailable Configuration Parameters for additional CAS3 configuration parameters.

Google

To enable the Google OAuth2 OmniAuth provider you must register your application with Google. Google will generate a client ID and secret key for you to use. Please refer to the GitLab documentation for the procedure to generate the client ID and secret key with google.

Once you have the client ID and secret keys generated, configure them using the OAUTH_GOOGLE_API_KEY andOAUTH_GOOGLE_APP_SECRET environment variables respectively.

For example, if your client ID is xxx.apps.googleusercontent.com and client secret key is yyy, then adding --env 'OAUTH_GOOGLE_API_KEY=xxx.apps.googleusercontent.com' --env 'OAUTH_GOOGLE_APP_SECRET=yyy' to the docker run command enables support for Google OAuth.

You can also restrict logins to a single domain by adding --env 'OAUTH_GOOGLE_RESTRICT_DOMAIN=example.com'. This is particularly useful when combined with --env 'OAUTH_ALLOW_SSO=true' and --env 'OAUTH_BLOCK_AUTO_CREATED_USERS=false'.

Facebook

To enable the Facebook OAuth2 OmniAuth provider you must register your application with Facebook. Facebook will generate a API key and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the API key and secret.

Once you have the API key and secret generated, configure them using the OAUTH_FACEBOOK_API_KEY andOAUTH_FACEBOOK_APP_SECRET environment variables respectively.

For example, if your API key is xxx and the API secret key is yyy, then adding --env 'OAUTH_FACEBOOK_API_KEY=xxx' --env 'OAUTH_FACEBOOK_APP_SECRET=yyy' to the docker run command enables support for Facebook OAuth.

Twitter

To enable the Twitter OAuth2 OmniAuth provider you must register your application with Twitter. Twitter will generate a API key and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the API key and secret with twitter.

Once you have the API key and secret generated, configure them using the OAUTH_TWITTER_API_KEY andOAUTH_TWITTER_APP_SECRET environment variables respectively.

For example, if your API key is xxx and the API secret key is yyy, then adding --env 'OAUTH_TWITTER_API_KEY=xxx' --env 'OAUTH_TWITTER_APP_SECRET=yyy' to the docker run command enables support for Twitter OAuth.

GitHub

To enable the GitHub OAuth2 OmniAuth provider you must register your application with GitHub. GitHub will generate a Client ID and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the Client ID and secret with github.

Once you have the Client ID and secret generated, configure them using the OAUTH_GITHUB_API_KEY andOAUTH_GITHUB_APP_SECRET environment variables respectively.

For example, if your Client ID is xxx and the Client secret is yyy, then adding --env 'OAUTH_GITHUB_API_KEY=xxx' --env 'OAUTH_GITHUB_APP_SECRET=yyy' to the docker run command enables support for GitHub OAuth.

GitLab

To enable the GitLab OAuth2 OmniAuth provider you must register your application with GitLab. GitLab will generate a Client ID and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the Client ID and secret with GitLab.

Once you have the Client ID and secret generated, configure them using the OAUTH_GITLAB_API_KEY andOAUTH_GITLAB_APP_SECRET environment variables respectively.

For example, if your Client ID is xxx and the Client secret is yyy, then adding --env 'OAUTH_GITLAB_API_KEY=xxx' --env 'OAUTH_GITLAB_APP_SECRET=yyy' to the docker run command enables support for GitLab OAuth.

BitBucket

To enable the BitBucket OAuth2 OmniAuth provider you must register your application with BitBucket. BitBucket will generate a Client ID and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the Client ID and secret with BitBucket.

Once you have the Client ID and secret generated, configure them using the OAUTH_BITBUCKET_API_KEY andOAUTH_BITBUCKET_APP_SECRET environment variables respectively.

For example, if your Client ID is xxx and the Client secret is yyy, then adding --env 'OAUTH_BITBUCKET_API_KEY=xxx' --env 'OAUTH_BITBUCKET_APP_SECRET=yyy' to the docker run command enables support for BitBucket OAuth.

SAML

GitLab can be configured to act as a SAML 2.0 Service Provider (SP). This allows GitLab to consume assertions from a SAML 2.0 Identity Provider (IdP) such as Microsoft ADFS to authenticate users. Please refer to the GitLab documentation.

The following parameters have to be configured to enable SAML OAuth support in this image:OAUTH_SAML_ASSERTION_CONSUMER_SERVICE_URL, OAUTH_SAML_IDP_CERT_FINGERPRINT, OAUTH_SAML_IDP_SSO_TARGET_URL,OAUTH_SAML_ISSUER and OAUTH_SAML_NAME_IDENTIFIER_FORMAT.

You can also override the default "Sign in with" button label with OAUTH_SAML_LABEL.

Please refer to Available Configuration Parameters for the default configurations of these parameters.

Crowd

To enable the Crowd server OAuth2 OmniAuth provider you must register your application with Crowd server.

Configure GitLab to enable access the Crowd server by specifying the OAUTH_CROWD_SERVER_URL, OAUTH_CROWD_APP_NAME andOAUTH_CROWD_APP_PASSWORD environment variables.

Microsoft Azure

To enable the Microsoft Azure OAuth2 OmniAuth provider you must register your application with Azure. Azure will generate a Client ID, Client secret and Tenant ID for you to use. Please refer to the GitLab documentation for the procedure.

Once you have the Client ID, Client secret and Tenant ID generated, configure them using the OAUTH_AZURE_API_KEY,OAUTH_AZURE_API_SECRET and OAUTH_AZURE_TENANT_ID environment variables respectively.

For example, if your Client ID is xxx, the Client secret is yyy and the Tenant ID is zzz, then adding --env 'OAUTH_AZURE_API_KEY=xxx' --env 'OAUTH_AZURE_API_SECRET=yyy' --env 'OAUTH_AZURE_TENANT_ID=zzz' to the docker run command enables support for Microsoft Azure OAuth.

External Issue Trackers

Since version 7.10.0 support for external issue trackers can be enabled in the "Service Templates" section of the settings panel.

If you are using the docker-redmine image, you can one up the gitlab integration with redmine by adding --volumes-from=gitlab flag to the docker run command while starting the redmine container.

By using the above option the /home/git/data/repositories directory will be accessible by the redmine container and now you can add your git repository path to your redmine project. If, for example, in your gitlab server you have a project namedopensource/gitlab, the bare repository will be accessible at /home/git/data/repositories/opensource/gitlab.git in the redmine container.

Host UID / GID Mapping

Per default the container is configured to run gitlab as user and group git with uid and gid 1000. The host possibly uses this ids for different purposes leading to unfavorable effects. From the host it appears as if the mounted data volumes are owned by the host's user/group 1000.

Also the container processes seem to be executed as the host's user/group 1000. The container can be configured to map theuid and gid of git to different ids on host by passing the environment variables USERMAP_UID and USERMAP_GID. The following command maps the ids to user and group git on the host.

docker run --name gitlab -it --rm [options] \
    --env "USERMAP_UID=$(id -u git)" --env "USERMAP_GID=$(id -g git)" \ sameersbn/gitlab:8.5.1

When changing this mapping, all files and directories in the mounted data volume /home/git/data have to be re-owned by the new ids. This can be achieved automatically using the following command:

docker run --name gitlab -d [OPTIONS] \
    sameersbn/gitlab:8.5.1 app:sanitize

https://github.com/sameersbn/docker-gitlab