Kubernetes 完整二进制部署(精品)

2020-04-16 761

Kubernetes 完整二进制部署(精品)
目录
1、基础环境
2、部署DNS
3、准备自签证书
4、部署Docker环境
5、私有仓库Harbor部署
6、部署Master节点
6.1、部署Etcd集群
6.2、部署kube-apiserver集群
6.2.1、创建cliient证书
6.2.2、签发kube-apiserver证书
6.2.3、kube-apiserver配置
6.3、L4反向代理
6.3.1、部署Nginx
6.3.2、部署keepalived
6.4、部署controller-manager
6.5、部署kube-scheduler
7、部署Node节点服务
7.1、部署Kubelet
7.1.1、签发kubelet证书
7.1.2、kubelet配置
7.1.3、准备pause基础镜像
7.1.4、创建kubelet启动脚本
7.2、部署kube-proxy
7.2.1、签发kube-proxy证书
7.2.2、Kube-proxy配置
7.2.3、创建kube-proxy启动脚本
8、验证集群
1、基础环境
1.安装epel-release

$ yum install epel-release -y
2.保证系统内核版本为3.10.x以上

$ uname -a
Linux k8s-node01 3.10.0-693.el7.x86_64
3.关闭防火墙和selinux

$ systemctl stop firewalld && systemctl disable firewalld
$ sed -i.bak 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
$ setenforce 0
4.时间同步

$ echo '#time sync by lidao at 2017-03-08' >>/var/spool/cron/root
$ echo '/5 * /usr/sbin/ntpdate pool.ntp.org >/dev/null 2>&1' >>/var/spool/cron/root
$ crontab -l
5.内核优化

$ cat >>/etc/sysctl.conf<net.ipv4.tcp_fin_timeout = 2
net.ipv4.ip_forward = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_keepalive_time = 600
net.ipv4.ip_local_port_range = 4000 65000
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.route.gc_timeout = 100
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_synack_retries = 1
net.core.somaxconn = 16384
net.core.netdev_max_backlog = 16384
net.ipv4.tcp_max_orphans = 16384
EOF

$ sysctl -p
6.安装必要工具

$ yum install wget net-tools telnet tree nmap sysstat lrzsz dos2unix bind-utils -y
2、部署DNS
bind9服务来实现DNS，在ingress中实现七层代理，在实验环境中就得绑定hosts方式实现访问，而且容器也没办法绑定hosts，这里通过DNS来实现。

1.安装bind9软件（hdss7-11）

$ yum install bind -y
2.主配置文件

$ vim /etc/named.conf
listen-on port 53 { 10.4.7.11; }; # dns监听地址
allow-query { any; }; # 允许所有主机访问dns服务
forwarders { 10.4.7.2; }; # 指定上级dns
recursion yes; # dns采用递归算法查询（另一种是迭代）
dnssec-enable no; # 节约资源将其关闭
dnssec-validation no; # 节约资源将其关闭
配置文件语法校验

没有报错说明语法没问题

$ named-checkconf
2.区域配置文件

定义了两个域，都为主DNS，运行本机update

$ vim /etc/named.rfc1912.zones
zone "host.com" IN {

    type master;
    file "host.com.zone";
    allow-update { 10.4.7.11; };

};

zone "od.com" IN {

    type master;
    file "od.com.zone";
    allow-update { 10.4.7.11; };

};
3.配置区域数据文件

/var/named/host.com.zone
$ORIGIN host.com.
$TTL 600 ; 10 minutes
@ IN SOA dns.host.com. dnsadmin.host.com. (

            2019011001 ; serial
            10800      ; refresh (3 hours)
            900        ; retry (15 minutes)
            604800     ; expire (1 week)
            86400      ; minimum (1 day)
            )
        NS   dns.host.com.

$TTL 60 ; 1 minute
dns A 10.4.7.11
HDSS7-11 A 10.4.7.11
HDSS7-12 A 10.4.7.12
HDSS7-21 A 10.4.7.21
HDSS7-22 A 10.4.7.22
HDSS7-200 A 10.4.7.200
/var/named/od.com.zone
$ORIGIN od.com.
$TTL 600 ; 10 minutes
@ IN SOA dns.od.com. dnsadmin.od.com. (

            2019011001 ; serial
            10800      ; refresh (3 hours)
            900        ; retry (15 minutes)
            604800     ; expire (1 week)
            86400      ; minimum (1 day)
            )
            NS   dns.od.com.

$TTL 60 ; 1 minute
dns A 10.4.7.11
4.启动dns服务

$ systemctl start named && systemctl enable named
5.验证是否可解析

$ dig -t A hdss7-21.host.com @10.4.7.11 +short
10.4.7.21
$ dig -t A hdss7-200.host.com @10.4.7.11 +short
10.4.7.200
6.DNS客户端配置

所有节点

修改网卡dns方式

修改网卡配置文件DNS1

$ vim /etc/sysconfig/network-scripts/ifcfg-eth0
DNS1=10.4.7.11

$ systemctl restart network

测试ping

$ ping baidu.com
PING baidu.com (39.156.69.79) 56(84) bytes of data.
64 bytes from 39.156.69.79 (39.156.69.79): icmp_seq=1 ttl=128 time=47.0 ms
64 bytes from 39.156.69.79 (39.156.69.79): icmp_seq=2 ttl=128 time=48.3 ms

$ ping hdss7-21.host.com
PING HDSS7-21.host.com (10.4.7.21) 56(84) bytes of data.
64 bytes from 10.4.7.21 (10.4.7.21): icmp_seq=1 ttl=64 time=0.821 ms
64 bytes from 10.4.7.21 (10.4.7.21): icmp_seq=2 ttl=64 time=0.598 ms
添加search(短域名)
$ vim /etc/resolv.conf

Generated by NetworkManager

search host.com
nameserver 10.4.7.2

Ping短域名

$ ping hdss7-200
PING HDSS7-200.host.com (10.4.7.200) 56(84) bytes of data.
64 bytes from 10.4.7.200 (10.4.7.200): icmp_seq=1 ttl=64 time=1.18 ms
64 bytes from 10.4.7.200 (10.4.7.200): icmp_seq=2 ttl=64 time=0.456 ms
3、准备自签证书
运维主机hdss7-200.host.com上：

1.安装CFSSL

$ wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -O /usr/bin/cfssl
$ wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -O /usr/bin/cfssl-json
$ wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -O /usr/bin/cfssl-certinfo
$ chmod +x /usr/bin/cfssl*
关于cfssl工具：
cfssl：证书签发的主要工具
cfssl-json：将cfssl生成的整数（json格式）变为文件承载式证书
cfssl-certinfo：验证证书的信息
2.创建生成CA证书签名请求（csr）的json配置文件

自签证书会有个根证书ca（需权威机构签发/可自签）

$ vim /opt/certs/ca-csr.json
{

"CN": "Sky",
"hosts": [
],
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
],
"ca": {
    "expiry": "175200h"
}

}
CN：浏览器使用该字段验证网站是否合法，一般写的是域名，非常重要

C：国家

ST：州/省

L：地区/城市

O：组织名称/公司名称

OU：组织单位名称，公司部门

3.生成CA证书和私钥

$ cfssl gencert -initca ca-csr.json | cfssl-json -bare ca
2020/01/10 13:58:49 [INFO] generating a new CA key and certificate from CSR
2020/01/10 13:58:49 [INFO] generate received request
2020/01/10 13:58:49 [INFO] received CSR
2020/01/10 13:58:49 [INFO] generating key: rsa-2048
2020/01/10 13:58:49 [INFO] encoded CSR
2020/01/10 13:58:49 [INFO] signed certificate with serial number 214125439771303219718649555160058070055859759808

$ ll
total 16
-rw-r--r-- 1 root root 328 Jan 10 13:53 ca-csr.json # 请求文件
-rw------- 1 root root 1675 Jan 10 13:58 ca-key.pem # 私钥
-rw-r--r-- 1 root root 993 Jan 10 13:58 ca.csr
-rw-r--r-- 1 root root 1346 Jan 10 13:58 ca.pem # 证书
4、部署Docker环境
hdss7-200.host.com,hdss7-21.host.com,hdss7-22.host.com上：

1.一键安装Docker-ce

$ curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun
$ docker version
2.配置文件

$ mkdir /etc/docker/
$ mkdir -p /data/docker
$ vim /etc/docker/daemon.json
{
"graph": "/data/docker",
"storage-driver": "overlay2",
"insecure-registries": ["registry.access.redhat.com","quay.io","harbor.od.com"],
"registry-mirrors": ["https://q2gr04ke.mirror.aliyuncs.com"],
"bip": "172.7.21.1/24",
"exec-opts": ["native.cgroupdriver=systemd"],
"live-restore": true
}
bip：172.7.x.1/24，x按照宿主机IP地址最后一位来设置

3.启动docker

$ systemctl restart docker.service && systemctl enable docker.service
5、私有仓库Harbor部署
hdss7-200.host.com上：

1.下载软件二进制包并解压

https://github.com/goharbor/harbor

$ tar xf harbor-offline-installer-v1.8.1.tgz -C /opt/
$ mv /opt/harbor/ /opt/harbor-v1.8.1
$ ln -s /opt/harbor-v1.8.1/ /opt/harbor
2.配置文件

$ vim /opt/harbor/harbor.yml
hostname: harbor.od.com
http:
port: 180
data_volume: /data/harbor
location: /data/harbor/logs
创建相应目录

$ mkdir -p /data/harbor/logs
3.安装docker-compose

用于编排harbor

$ yum install docker-compose -y
4.启动harbor

$ sh /opt/harbor/install.sh
$ docker-compose ps
5.基于Nginx实现代理访问Harbor

$ yum install nginx -y

$ vim /etc/nginx/conf.d/harbor.od.com.conf
server {

listen       80;
server_name  harbor.od.com;

client_max_body_size 1000m;

location / {
    proxy_pass http://127.0.0.1:180;
}

}
配置说明：用户访问url：harbor.od.com 端口80 将其流量代理到 127.0.0.1:180

启动nginx

$ nginx -t
$ systemctl start nginx && systemctl enable nginx
6.hdss7-11上添加dns A记录

$ vi /var/named/od.com.zone
harbor A 10.4.7.200
注意serial前滚一个序号

重启dns并测试

$ systemctl restart named
$ dig -t A harbor.od.com +short
10.4.7.200
7.浏览器访问：harbor.od.com

用户名：admin、密码：Harbor12345

8.harbor上新建一个名：public 公开项目

9.从docker.io拉取nginx镜像

$ docker pull nginx:1.7.9

等价于

$ docker pull docker.io/library/nginx:1.7.9
将从公网下载的nginx打上刚才创建的harbor仓库下public项目的tag

找到nginx image id将其打上new tag

$ docker tag 84581e99d807 harbor.od.com/public/nginx:v1.7.9

需先登录harbor

$ docker login harbor.od.com
Username: admin
Password:

然后在推送镜像到私有仓库

$ docker push harbor.od.com/public/nginx:v1.7.9
6、部署Master节点
6.1、部署Etcd集群
集群规划

主机名角色 ip
hdss7-12.host.com etcd lead 10.4.7.12
hdss7-21.host.com etcd follow 10.4.7.21
hdss7-22.host.com etcd follow 10.4.7.22
注意：这里部署文档以hdss7-12.host.com主机为例，另外两台主机安装部署方法类似

1.创建基于根证书的config配置文件

运维主机hdss7-200上：

$ vim /opt/certs/ca-config.json
{

"signing": {
    "default": {
        "expiry": "175200h"
    },
    "profiles": {
        "server": {
            "expiry": "175200h",
            "usages": [
                "signing",
                "key encipherment",
                "server auth"
            ]
        },
        "client": {
            "expiry": "175200h",
            "usages": [
                "signing",
                "key encipherment",
                "client auth"
            ]
        },
        "peer": {
            "expiry": "175200h",
            "usages": [
                "signing",
                "key encipherment",
                "server auth",
                "client auth"
            ]
        }
    }
}

}
证书类型

client：客户端使用，用于服务端认证客户端，例如etcdctl、etcd proxy、fleetctl、docker客户端。

server：服务端使用，客户端以此验证服务端身份，例如docker服务端、kube-apiserver

peer：双向证书，用于etcd集群成员间通信

2.创建生成etcd自签证书签名请求（csr）的json配置文件

运维主机hdss7-200上：

$ vim /opt/certs/etcd-peer-csr.json
{

"CN": "k8s-etcd",
"hosts": [
    "10.4.7.11",
    "10.4.7.12",
    "10.4.7.21",
    "10.4.7.22"
],
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
]

}
hosts：添加部署etcd机器的IP地址，尽量多预留几个

3.生成etcd证书和私钥

运维主机hdss7-200上：

$ cd /opt/certs
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=peer etcd-peer-csr.json |cfssl-json -bare etcd-peer
2020/01/10 15:05:30 [INFO] generate received request
2020/01/10 15:05:30 [INFO] received CSR
2020/01/10 15:05:30 [INFO] generating key: rsa-2048
2020/01/10 15:05:30 [INFO] encoded CSR
2020/01/10 15:05:30 [INFO] signed certificate with serial number 257419759502713087580344599035913411225571544160
2020/01/10 15:05:30 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for

For more information see the Baseline Requirements for the Issuance and Management
Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

specifically, section 10.2.3 ("Information Requirements").
检查生成的证书、私钥

$ ll etcd-peer*
-rw-r--r-- 1 root root 364 Jan 10 15:03 etcd-peer-csr.json
-rw------- 1 root root 1675 Jan 10 15:05 etcd-peer-key.pem
-rw-r--r-- 1 root root 1062 Jan 10 15:05 etcd-peer.csr
-rw-r--r-- 1 root root 1428 Jan 10 15:05 etcd-peer.pem
4.创建etcd用户

hdss7-12.host.com上：

$ useradd -s /sbin/nologin -M etcd
5.下载软件、解压,做软连接

hdss7-12.host.com上：

etcd下载地址

$ tar xf etcd-v3.1.20-linux-amd64.tar.gz -C /opt/
$ mv /opt/etcd-v3.1.20-linux-amd64/ /opt/etcd-v3.1.20
$ ln -s /opt/etcd-v3.1.20/ /opt/etcd
6.创建目录，拷贝证书、私钥

hdss7-12.host.com上：

创建目录
$ mkdir -p /opt/etcd/certs /data/etcd /data/logs/etcd-server
拷贝证书
将运维主机上生成的ca.pem、etcd-peer-key.pem、etcd-peer.pem拷贝到/opt/etcd/certs目录中，注意私钥文件权限600

$ ll -l
total 12
-rw-r--r-- 1 root root 1346 Jan 27 12:04 ca.pem
-rw------- 1 root root 1675 Jan 27 12:03 etcd-peer-key.pem
-rw-r--r-- 1 root root 1432 Jan 27 12:03 etcd-peer.pem
修改权限
$ chown -R etcd.etcd /opt/etcd-v3.1.20 /data/etcd/ /data/logs/etcd-server/
必须使用etcd用户启动

7.创建etcd服务启动脚本

hdss7-12.host.com上：

$ vim /opt/etcd/etcd-server-startup.sh

!/bin/sh

./etcd --name etcd-server-7-12 \

   --data-dir /data/etcd/etcd-server \
   --listen-peer-urls https://10.4.7.12:2380 \
   --listen-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \
   --quota-backend-bytes 8000000000 \
   --initial-advertise-peer-urls https://10.4.7.12:2380 \
   --advertise-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \
   --initial-cluster  etcd-server-7-12=https://10.4.7.12:2380,etcd-server-7-21=https://10.4.7.21:2380,etcd-server-7-22=https://10.4.7.22:2380 \
   --ca-file ./certs/ca.pem \
   --cert-file ./certs/etcd-peer.pem \
   --key-file ./certs/etcd-peer-key.pem \
   --client-cert-auth  \
   --trusted-ca-file ./certs/ca.pem \
   --peer-ca-file ./certs/ca.pem \
   --peer-cert-file ./certs/etcd-peer.pem \
   --peer-key-file ./certs/etcd-peer-key.pem \
   --peer-client-cert-auth \
   --peer-trusted-ca-file ./certs/ca.pem \
   --log-output stdout

配置参数说明

参数说明
--listen-peer-urls 本member侧使用，用于监听其他member发送信息的地址。ip为全0代表监听本member侧所有接口
--listen-client-urls 本member侧使用，用于监听etcd客户发送信息的地址。ip为全0代表监听本member侧所有接口
--initial-advertise-peer-urls 其他member使用，其他member通过该地址与本member交互信息。一定要保证从其他member能可访问该地址。静态配置方式下，该参数的value一定要同时在--initial-cluster参数中存在。memberID的生成受--initial-cluster-token和--initial-advertise-peer-urls影响。
--advertise-client-urls etcd客户使用，客户通过该地址与本member交互信息。一定要保证从客户侧能可访问该地址
--initial-cluster etcd集群所有节点配置，多个用逗号隔开
-quota-backend-bytes 指定etcd存储配额超过指定大小后引发报警
--client-cert-auth 启动客户端证书进行身份验证
--log-output 指定“ stdout”或“ stderr”以跳过日志记录，即使在systemd或逗号分隔的输出目标列表下运行时也是如此。
详细请点击

给脚本添加执行权限

$ chmod +x /opt/etcd/etcd-server-startup.sh
8.创建etcd-server的启动配置

hdss7-12.host.com上：

安装supervisor（优势：自动拉起挂掉的程序）

$ yum install supervisor -y
$ systemctl start supervisord && systemctl enable supervisord
将etcd启动脚本交给supervisor管理

$ vim /etc/supervisord.d/etcd-server.ini
[program:etcd-server-7-12]
command=/opt/etcd/etcd-server-startup.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/etcd ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected
quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=etcd ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/etcd-server/etcd.stdout.log ; stdout log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
注意：etcd集群各主机启动配置略有不同，配置其它节点时注意修改；

9.启动etcd

hdss7-12.host.com上：

$ supervisorctl update
etcd-server-7-12: added process group
检查是否启动

$ supervisorctl status
etcd-server-7-12 RUNNING pid 5029, uptime 0:02:11
$ netstat -lntup | grep "etcd"
tcp 0 0 10.4.7.12:2379 0.0.0.0:* LISTEN 5030/./etcd
tcp 0 0 127.0.0.1:2379 0.0.0.0:* LISTEN 5030/./etcd
tcp 0 0 10.4.7.12:2380 0.0.0.0:* LISTEN 5030/./etcd
10.检查集群状态（必须在三节点起来后）

$ /opt/etcd/etcdctl cluster-health
member 988139385f78284 is healthy: got healthy result from http://127.0.0.1:2379
member 5a0ef2a004fc4349 is healthy: got healthy result from http://127.0.0.1:2379
member f4a0cb0a765574a8 is healthy: got healthy result from http://127.0.0.1:2379
cluster is healthy
检查集群角色

$ ./etcdctl member list
988139385f78284: name=etcd-server-7-22 peerURLs=https://10.4.7.22:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.22:2379 isLeader=false
5a0ef2a004fc4349: name=etcd-server-7-21 peerURLs=https://10.4.7.21:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.21:2379 isLeader=false
f4a0cb0a765574a8: name=etcd-server-7-12 peerURLs=https://10.4.7.12:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.12:2379 isLeader=true
6.2、部署kube-apiserver集群
集群规划

主机名角色 ip
hdss7-21.host.com kube-apiserver 10.4.7.21
hdss7-22.host.com kube-apiserver 10.4.7.22
hdss7-11.host.com 4层负载均衡 10.4.7.11
hdss7-12.host.com 4层负载均衡 10.4.7.12
注意：这里10.4.7.11和10.4.7.12使用nginx做4层负载均衡，用keepalived跑一个VIP：10.4.7.10，代理两个kube-apiserver，实现高可用

这类部署文档以hdss7-21.host.com主机为例，另外一台运算节点部署方法类似

下载软件，解压，做软连接

hdss7-21.host.com上：

kubernetes官方Github地址

kuberneetes下载地址

$ tar xf /opt/src/kubernetes-server-linux-amd64-v1.15.2.tar.gz -C /opt/
$ mv /opt/kubernetes/ /opt/kubernetes-v1.15.2
$ ln -s /opt/kubernetes-v1.15.2/ /opt/kubernetes
6.2.1、创建cliient证书
运维主机hdss7-200上：

1创建生成证书签名请求（csr）的json配置文件

$ vim /opt/certs/client-csr.json
{

"CN": "k8s-node",
"hosts": [
],
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
]

}
2.生成client证书和私钥

$ cd /opt/certs/
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client client-csr.json |cfssl-json -bare client
2020/01/10 16:16:35 [INFO] generate received request
2020/01/10 16:16:35 [INFO] received CSR
2020/01/10 16:16:35 [INFO] generating key: rsa-2048
2020/01/10 16:16:36 [INFO] encoded CSR
2020/01/10 16:16:36 [INFO] signed certificate with serial number 294650890732881478597150479545220844543007627512
2020/01/10 16:16:36 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for

For more information see the Baseline Requirements for the Issuance and Management
Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

specifically, section 10.2.3 ("Information Requirements").
3.检查生成的证书、私钥

$ ll client*
-rw-r--r-- 1 root root 280 Jan 10 16:15 client-csr.json
-rw------- 1 root root 1679 Jan 10 16:16 client-key.pem
-rw-r--r-- 1 root root 993 Jan 10 16:16 client.csr
-rw-r--r-- 1 root root 1363 Jan 10 16:16 client.pem
6.2.2、签发kube-apiserver证书
运维主机hdss7-200上：

1.创建生成证书签名请求（csr）的json配置文件

$ vim /opt/certs/apiserver-csr.json
{

"CN": "k8s-apiserver",
"hosts": [
    "127.0.0.1",
    "192.168.0.1",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local",
    "10.4.7.10",
    "10.4.7.21",
    "10.4.7.22",
    "10.4.7.23"
],
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
]

}
注意：

hosts 字段指定授权使用该证书的 IP 或域名列表，这里列出了 VIP 、apiserver节点 IP、kubernetes 服务 IP 和域名；
域名最后字符不能是 . (如不能为kubernetes.default.svc.cluster.local. )，否则解析时失败，提示： x509:cannot parse dnsName "kubernetes.default.svc.cluster.local." ；
如果使用非 cluster.local 域名，如 opsnull.com ，则需要修改域名列表中的最后两个域名为： kubernetes.default.svc.opsnull 、 kubernetes.default.svc.opsnull.com
kubernetes 服务 IP 是 apiserver 自动创建的，一般是 --service-cluster-ip-range 参数指定的网段的第一个IP，后续可以通过如下命令获取：
$ kubectl get svc kubernetes
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 192.168.0.1 443/TCP 4d
2.生成api-server证书和私钥

$ cd /opt/certs
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server apiserver-csr.json |cfssl-json -bare apiserver
2020/01/10 16:21:06 [INFO] generate received request
2020/01/10 16:21:06 [INFO] received CSR
2020/01/10 16:21:06 [INFO] generating key: rsa-2048
2020/01/10 16:21:07 [INFO] encoded CSR
2020/01/10 16:21:07 [INFO] signed certificate with serial number 533398970701884951320970228765072309875544569205
2020/01/10 16:21:07 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for

For more information see the Baseline Requirements for the Issuance and Management
Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

specifically, section 10.2.3 ("Information Requirements").
3.检查生成的证书、私钥

$ ll apiserver*
-rw-r--r-- 1 root root 566 Jan 10 16:19 apiserver-csr.json
-rw------- 1 root root 1679 Jan 10 16:21 apiserver-key.pem
-rw-r--r-- 1 root root 1249 Jan 10 16:21 apiserver.csr
-rw-r--r-- 1 root root 1598 Jan 10 16:21 apiserver.pem
6.2.3、kube-apiserver配置
hdss7-21上：

1.创建目录存放证书和私钥以及配置文件

$ mkdir /opt/kubernetes/server/bin/cert /opt/kubernetes/server/bin/conf
/opt/kubernetes/server/bin/cert：存放证书

/opt/kubernetes/server/bin/conf：存放启动配置文件

2.拷贝证书、私钥，注意私钥文件属性600

$ ll # 三套证书
total 24
-rw------- 1 root root 1679 Jan 10 16:32 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Jan 10 16:32 apiserver.pem
-rw------- 1 root root 1675 Jan 10 16:32 ca-key.pem
-rw-r--r-- 1 root root 1346 Jan 10 16:32 ca.pem
-rw------- 1 root root 1679 Jan 10 16:32 client-key.pem
-rw-r--r-- 1 root root 1363 Jan 10 16:32 client.pem
3.创建api-server审计策略文件

$ vi /opt/kubernetes/server/bin/conf/audit.yaml
apiVersion: audit.k8s.io/v1beta1 # This is required.
kind: Policy

Don't generate audit events for all requests in RequestReceived stage.

omitStages:

"RequestReceived"
rules:

# Log pod changes at RequestResponse level

level: RequestResponse
resources:
- group: ""
  # Resource "pods" doesn't match requests to any subresource of pods,
# which is consistent with the RBAC policy.
resources: ["pods"]
# Log "pods/log", "pods/status" at Metadata level
level: Metadata
resources:
- group: ""
  resources: ["pods/log", "pods/status"]

# Don't log requests to a configmap called "controller-leader"

level: None
resources:
- group: ""
  resources: ["configmaps"]
resourceNames: ["controller-leader"]

# Don't log watch requests by the "system:kube-proxy" on endpoints or services

level: None
users: ["system:kube-proxy"]
verbs: ["watch"]
resources:
- group: "" # core API group
  resources: ["endpoints", "services"]

# Don't log authenticated requests to certain non-resource URL paths.

level: None
userGroups: ["system:authenticated"]
nonResourceURLs:
- "/api*" # Wildcard matching.
- "/version"

# Log the request body of configmap changes in kube-system.

level: Request
resources:
- group: "" # core API group
  resources: ["configmaps"]
This rule only applies to resources in the "kube-system" namespace.

The empty string "" can be used to select non-namespaced resources.

namespaces: ["kube-system"]

# Log configmap and secret changes in all other namespaces at the Metadata level.

level: Metadata
resources:
- group: "" # core API group
  resources: ["secrets", "configmaps"]

# Log all other resources in core and extensions at the Request level.

level: Request
resources:
- group: "" # core API group
- group: "extensions" # Version of group should NOT be included.

# A catch-all rule to log all other requests at the Metadata level.

level: Metadata

# Long-running requests like watches that fall under this rule will not
# generate an audit event in RequestReceived.
omitStages:

"RequestReceived"
4.创建启动脚本

$ vim /opt/kubernetes/server/bin/kube-apiserver.sh

!/bin/bash

./kube-apiserver \
--apiserver-count 2 \
--insecure-port 8080 \
--secure-port 6443 \
--audit-log-path /data/logs/kubernetes/kube-apiserver/audit-log \
--audit-policy-file ./conf/audit.yaml \
--authorization-mode RBAC \
--client-ca-file ./cert/ca.pem \
--requestheader-client-ca-file ./cert/ca.pem \
--enable-admission-plugins NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota \
--etcd-cafile ./cert/ca.pem \
--etcd-certfile ./cert/client.pem \
--etcd-keyfile ./cert/client-key.pem \
--etcd-servers https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 \
--service-account-key-file ./cert/ca-key.pem \
--service-cluster-ip-range 192.168.0.0/16 \
--service-node-port-range 3000-29999 \
--target-ram-mb=1024 \
--kubelet-client-certificate ./cert/client.pem \
--kubelet-client-key ./cert/client-key.pem \
--log-dir /data/logs/kubernetes/kube-apiserver \
--tls-cert-file ./cert/apiserver.pem \
--tls-private-key-file ./cert/apiserver-key.pem \
--v 2
service-cluster-ip-range：指定service IP（cluster ip）范围

配置参数说明

参数说明
--apiserver-count 指定集群运行模式，多台 kube-apiserver 会通过 leader选举产生一个工作节点，其它节点处于阻塞状态
--authorization-mode 开启指定授权模式，拒绝未授权的请求，默认值：AlwaysAllow；以逗号分隔的列表：AlwaysAllow,AlwaysDeny,ABAC,Webhook,RBAC,Node
--enable-admission-plugins 启用指定插件
--etcd-servers etcd服务器列表（格式：//ip:port），逗号分隔
--service-account-key-file 包含PEM编码的x509 RSA或ECDSA私有或者公共密钥的文件。用于验证service account token。指定的文件可以包含多个值。参数可以被指定多个不同的文件。如未指定，--tls-private-key-file将被使用。如果提供了--service-account-signing-key，则必须指定该参数
--service-cluster-ip-range CIDR表示IP范围，用于分配服务集群IP(service ip)。不能与分配给pod节点的IP重叠 (default 10.0.0.0/24)
--service-node-port-range 为NodePort服务保留的端口范围。默认值 30000-32767
--kubelet-client-certificate、kubelet-client-key 如果指定，则使用 https 访问 kubelet APIs；需要为证书对应的用户(上面 kubernetes*.pem 证书的用户为 kubernetes) 用户定义 RBAC 规则，否则访问 kubelet API 时提示未授权
--tls-cert-file、tls-private-key-file 使用 https 输出 metrics 时使用的 Server 证书和秘钥
--insecure-port HTTP服务，默认端口8080，默认IP是本地主机，修改标识--insecure-bind-address，在HTTP中没有认证和授权检查
--secure-port HTTPS服务，默认端口6443，默认IP是首个非本地主机的网络接口，修改标识--bind-address，设置证书和秘钥的标识，--tls-cert-file，--tls-private-key-file，认证方式，令牌文件或者客户端证书，使用基于策略的授权方式
给脚本添加执行权限

$ chmod +x /opt/kubernetes/server/bin/kube-apiserver.sh
5.创建api-server的启动配置

$ vi /etc/supervisord.d/kube-apiserver.ini
[program:kube-apiserver-7-21]
command=/opt/kubernetes/server/bin/kube-apiserver.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-apiserver/apiserver.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
6.创建日志目录

$ mkdir -p /data/logs/kubernetes/kube-apiserver
7.启动并检查

$ supervisorctl update
$ supervisorctl status
etcd-server-7-22 RUNNING pid 4013, uptime 1:12:36
kube-apiserver-7-22 RUNNING pid 4596, uptime 0:00:31
8.查看api-server端口

$ netstat -lntup | egrep "8080|6443"
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 20375/./kube-apiser
tcp6 0 0 :::6443 :::* LISTEN 20375/./kube-apiser
6.3、L4反向代理
hdss7-11和hdss7-12上基于nginx实现L4反向代理调度到后端的kubernetes api-server：

所有Node节点的k8s组件：kubelet，kube-proxy会去访问https://10.4.7.10:7443这个地址，并携带证书

6.3.1、部署Nginx
1.安装nginx

$ yum install nginx -y
2.nginx配置文件

$ vim /etc/nginx/nginx.conf # 黏贴到http标签外
stream {

# kubernetes api-server ip地址以及https端口
upstream kube-apiserver {
    server 10.4.7.21:6443     max_fails=3 fail_timeout=30s;
    server 10.4.7.22:6443     max_fails=3 fail_timeout=30s;
}
# 监听7443端口，将其接收的流量转发至指定proxy_pass
server {
    listen 7443;
    proxy_connect_timeout 2s;
    proxy_timeout 900s;
    proxy_pass kube-apiserver;
}

}
3.启动nginx

$ systemctl start nginx && systemctl enable nginx
6.3.2、部署keepalived
1.安装keepalived

$ yum install keepalived -y
2.监听脚本

$ vi /etc/keepalived/check_port.sh

!/bin/bash

keepalived 监控端口脚本

使用方法：

在keepalived的配置文件中

vrrp_script check_port {#创建一个vrrp_script脚本,检查配置

script "/etc/keepalived/check_port.sh 6379" #配置监听的端口

interval 2 #检查脚本的频率,单位（秒）

}

CHK_PORT=$1
if [ -n "$CHK_PORT" ];then

    PORT_PROCESS=`ss -lnt|grep $CHK_PORT|wc -l`
    if [ $PORT_PROCESS -eq 0 ];then
            echo "Port $CHK_PORT Is Not Used,End."
            exit 1
    fi

else

    echo "Check Port Cant Be Empty!"

fi
添加可执行权限

$ chmod +x /etc/keepalived/check_port.sh
3.keepalived主配置文件

$ vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
router_id 10.4.7.11
}

vrrp_script chk_nginx {

# 调用脚本检测nginx监听的7443端口是否存在
script "/etc/keepalived/check_port.sh 7443"
interval 2
weight -20

}

vrrp_instance VI_1 {

state MASTER
interface eth0
virtual_router_id 251
priority 100
advert_int 1
# 当前主机IP
mcast_src_ip 10.4.7.11
nopreempt
    
    # 高可用认证
authentication {
    auth_type PASS
    auth_pass 11111111
}
track_script {
     chk_nginx
}
# 虚拟IP
virtual_ipaddress {
    10.4.7.10
}

}
4.keepalived备配置文件

$ vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {

router_id 10.4.7.12

}
vrrp_script chk_nginx {

script "/etc/keepalived/check_port.sh 7443"
interval 2
weight -20

}
vrrp_instance VI_1 {

state BACKUP
interface eth0
virtual_router_id 251
mcast_src_ip 10.4.7.12
priority 90
advert_int 1
authentication {
    auth_type PASS
    auth_pass 11111111
}
track_script {
    chk_nginx
}
virtual_ipaddress {
    10.4.7.10
}

}
5.启动

$ systemctl start keepalived.service && systemctl enable keepalived.service
6.4、部署controller-manager
hdss7-21.host.com和hdss7-22.host.com都部署了api-server，并且暴露了127.0.0.1:8080端口，也就是只能当前机器访问，那么controller-manager也是部署到当前机器，那就可以通过非安全端口8080直接访问到本机的api-server，即访问快捷/速度快又不需要证书认证。

集群规划

主机名角色 ip
hdss7-21.host.com controller-manager 10.4.7.21
hdss7-22.host.com controller-manager 10.4.7.22
注意：这里部署文档以hdds7-21.host.com主机为例，另外一台运算节点安装部署方法类似

1.创建启动脚本

$ vim /opt/kubernetes/server/bin/kube-controller-manager.sh

!/bin/sh

./kube-controller-manager \
--cluster-cidr 172.7.0.0/16 \
--leader-elect true \
--log-dir /data/logs/kubernetes/kube-controller-manager \
--master http://127.0.0.1:8080 \
--service-account-private-key-file ./cert/ca-key.pem \
--service-cluster-ip-range 192.168.0.0/16 \
--root-ca-file ./cert/ca.pem \
--v 2
配置参数说明

参数说明
--cluster-cidr 集群中Pod的CIDR范围，
--master kubernetes api server的地址，将会覆盖kubeconfig设置的值
--service-cluster-ip-range 集群service的cidr范围，需要--allocate-node-cidrs设置为true
--leader-elect 多个master情况设置为true保证高可用，进行leader选举
--leader-elect-lease-duration duration 当leader-elect设置为true生效，选举过程中非leader候选等待选举的时间间隔（default 15s）
--leader-elect-renew-deadline duration eader选举过程中在停止leading，再次renew时间间隔，小于或者等于leader-elect-lease-duration duration，也是leader-elect设置为true生效（default 10s）
--leader-elect-retry-period duration 当leader-elect设置为true生效，获取leader或者重新选举的等待间隔（default 2s）
2.调整文件权限，创建日志存放目录

$ chmod +x /opt/kubernetes/server/bin/kube-controller-manager.sh
$ mkdir -p /data/logs/kubernetes/kube-controller-manager
3.创建controller-manager的启动配置

$ vi /etc/supervisord.d/kube-conntroller-manager.ini
[program:kube-controller-manager-7-21]
command=/opt/kubernetes/server/bin/kube-controller-manager.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-controller-manager/controller.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
4.启动并检查

$ supervisorctl update
$ supervisorctl status
etcd-server-7-21 RUNNING pid 4148, uptime 2:07:47
kube-apiserver-7-21 RUNNING pid 4544, uptime 1:02:36
kube-controller-manager-7-21 RUNNING pid 4690, uptime 0:00:32
6.5、部署kube-scheduler
hdss7-21.host.com和hdss7-22.host.com都部署了api-server，并且暴露了127.0.0.1:8080端口，也就是只能当前机器访问，那么kube-scheduler也是部署到当前机器，那就可以通过非安全端口8080直接访问到本机的api-server，即访问快捷/速度快又不需要证书认证。

集群规划

主机名角色 ip
hdss7-21.host.com kube-scheduler 10.4.7.21
hdss7-22.host.com kube-scheduler 10.4.7.22
注意：这里部署文档以hdds7-21.host.com主机为例，另外一台运算节点安装部署方法类似

1.创建启动脚本

$ vim /opt/kubernetes/server/bin/kube-scheduler.sh

!/bin/sh

./kube-scheduler \
--leader-elect \
--log-dir /data/logs/kubernetes/kube-scheduler \
--master http://127.0.0.1:8080 \
--v 2
master：指定api-server

2.调整文件权限，创建目录

$ chmod +x /opt/kubernetes/server/bin/kube-scheduler.sh
$ mkdir -p /data/logs/kubernetes/kube-scheduler
3.创建controller-manager的启动配置

$ vi /etc/supervisord.d/kube-scheduler.ini
[program:kube-scheduler-7-21]
command=/opt/kubernetes/server/bin/kube-scheduler.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-scheduler/scheduler.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
4.启动并检查

$ supervisorctl update
$ supervisorctl status
etcd-server-7-21 RUNNING pid 4148, uptime 2:11:12
kube-apiserver-7-21 RUNNING pid 4544, uptime 1:06:01
kube-controller-manager-7-21 RUNNING pid 4690, uptime 0:03:57
kube-scheduler-7-21 RUNNING pid 4727, uptime 0:00:32
5.检查集群健康状态

$ ln -s /opt/kubernetes/server/bin/kubectl /usr/bin/kubectl
$ kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-2 Healthy {"health": "true"}
etcd-0 Healthy {"health": "true"}
etcd-1 Healthy {"health": "true"}
7、部署Node节点服务
7.1、部署Kubelet
集群规划

主机名角色 ip
hdss7-21.host.com kubelet 10.4.7.21
hdss7-22.host.com kubelet 10.4.7.22
注意：这里部署文档以hdds7-21.host.com主机为例，另外一台运算节点安装部署方法类似

7.1.1、签发kubelet证书
运维主机hdss7-200.host.com上：

1.创建生成证书签名请求（csr）的json配置文件

$ vim /opt/certs/kubelet-csr.json
{

"CN": "k8s-kubelet",
"hosts": [
"127.0.0.1",
"10.4.7.10",
"10.4.7.21",
"10.4.7.22",
"10.4.7.23",
"10.4.7.24",
"10.4.7.25",
"10.4.7.26",
"10.4.7.27",
"10.4.7.28"
],
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
]

}
2.生成证书和私钥

$ cd /opt/certs
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server kubelet-csr.json | cfssl-json -bare kubelet
2020/01/10 20:15:39 [INFO] generate received request
2020/01/10 20:15:39 [INFO] received CSR
2020/01/10 20:15:39 [INFO] generating key: rsa-2048
2020/01/10 20:15:40 [INFO] encoded CSR
2020/01/10 20:15:40 [INFO] signed certificate with serial number 526251135664766815056179206511844993208257685250
2020/01/10 20:15:40 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for

For more information see the Baseline Requirements for the Issuance and Management
Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

specifically, section 10.2.3 ("Information Requirements").
3.检查证书和私钥

$ ll kubelet*
-rw-r--r-- 1 root root 452 Jan 10 20:15 kubelet-csr.json
-rw------- 1 root root 1675 Jan 10 20:15 kubelet-key.pem
-rw-r--r-- 1 root root 1115 Jan 10 20:15 kubelet.csr
-rw-r--r-- 1 root root 1468 Jan 10 20:15 kubelet.pem
7.1.2、kubelet配置
hdss7-21.host.com上：

1.拷贝证书到各运算节点，并创建配置（证书、私钥，注意私钥文件权限600）

$ ll /opt/kubernetes/server/bin/cert/
total 32
-rw------- 1 root root 1679 Jan 10 16:32 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Jan 10 16:32 apiserver.pem
-rw------- 1 root root 1675 Jan 10 16:32 ca-key.pem
-rw-r--r-- 1 root root 1346 Jan 10 16:32 ca.pem
-rw------- 1 root root 1679 Jan 10 16:32 client-key.pem
-rw-r--r-- 1 root root 1363 Jan 10 16:32 client.pem
-rw------- 1 root root 1675 Jan 10 20:20 kubelet-key.pem
-rw-r--r-- 1 root root 1468 Jan 10 20:20 kubelet.pem
2.创建kubelet配置文件

基于https的方式访问到nginx反代的vip

进入指定目录

$ cd /opt/kubernetes/server/bin/conf/

指定根证书和api-server的vip

$ kubectl config set-cluster myk8s \
--certificate-authority=/opt/kubernetes/server/bin/cert/ca.pem \
--embed-certs=true \
--server=https://10.4.7.10:7443 \
--kubeconfig=kubelet.kubeconfig

拿客户端密钥和api-server通信

$ kubectl config set-credentials k8s-node \
--client-certificate=/opt/kubernetes/server/bin/cert/client.pem \
--client-key=/opt/kubernetes/server/bin/cert/client-key.pem \
--embed-certs=true \
--kubeconfig=kubelet.kubeconfig

以k8s-node用户去访问api-server（该用户需要授权）

$ kubectl config set-context myk8s-context \
--cluster=myk8s \
--user=k8s-node \
--kubeconfig=kubelet.kubeconfig

$ kubectl config use-context myk8s-context --kubeconfig=kubelet.kubeconfig
关于kubeconfig文件
这是一个k8s用户的配置文件
它里面含有证书信息
证书过期或更换，需要同步替换该文件
3.创建授权资源配置文件k8s-node.yaml

创建一次即可，用于给k8s-node这个访问账户授权，权限为k8s节点

$ vim /opt/kubernetes/server/bin/conf/k8s-node.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: k8s-node
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:node
subjects:

apiGroup: rbac.authorization.k8s.io
kind: User

name: k8s-node
User account是为人设计的，而service account则是为Pod中的进程调用Kubernetes API而设计；
User account是跨namespace的，而service account则是仅局限它所在的namespace
4.使用kubctl创建

$ kubectl create -f /opt/kubernetes/server/bin/conf/k8s-node.yaml
7.1.3、准备pause基础镜像
pause镜像是k8s里必不可少的以pod方式运行业务容器时的一个基础容器。

运维主机hdss7-200.host.com上：

1.下载

$ docker pull kubernetes/pause
2.提交至私有仓库（harbor）中

$ docker tag f9d5de079539 harbor.od.com/public/pause:latest
$ docker push harbor.od.com/public/pause:latest
7.1.4、创建kubelet启动脚本
hdss7-21.host.com上：

1.启动脚本

$ vim /opt/kubernetes/server/bin/kubelet.sh

!/bin/sh

./kubelet \
--anonymous-auth=false \
--cgroup-driver systemd \
--cluster-dns 192.168.0.2 \
--cluster-domain cluster.local \
--runtime-cgroups=/systemd/system.slice \
--kubelet-cgroups=/systemd/system.slice \
--fail-swap-on="false" \
--client-ca-file ./cert/ca.pem \
--tls-cert-file ./cert/kubelet.pem \
--tls-private-key-file ./cert/kubelet-key.pem \
--hostname-override hdss7-22.host.com \
--image-gc-high-threshold 20 \
--image-gc-low-threshold 10 \
--kubeconfig ./conf/kubelet.kubeconfig \
--log-dir /data/logs/kubernetes/kube-kubelet \
--pod-infra-container-image harbor.od.com/public/pause:latest \
--root-dir /data/kubelet
cluster-dns：指定集群内部dns地址

hostname-override：当前机器主机名

pod-infra-container-image：pause镜像拉取地址

kubeconfig：指定上面创建的上下文配置文件

参数配置解析

参数说明
--anonymous-auth 允许匿名请求到 kubelet 服务。未被另一个身份验证方法拒绝的请求被视为匿名请求。匿名请求包含系统的用户名: anonymous ，以及系统的组名: unauthenticated （默认 true ）
--cgroup-driver 可选值有cgroupfs和systemd（默认cgroupfs）与docker驱动一致
--cluster-dns DNS 服务器的IP列表，多个用逗号分隔
--cluster-domain 集群域名, kubelet 将配置所有容器除了主机搜索域还将搜索当前域
--fail-swap-on 如果设置为true则启动kubelet失败(default true)
--hostname-override cluster中的node name
--image-gc-high-threshold 磁盘使用率最大值，超过此值将执行镜像垃圾回收(default 85)
--image-gc-low-threshold 磁盘使用率最大值，低于此值将停止镜像垃圾回收(default 80)
--kubeconfig 用来指定如何连接到 API server
--pod-infra-container-image 每个 pod 中的 network/ipc 命名空间容器将使用的pause镜像
--root-dir kubelet 的工作目录
创建目录

$ mkdir -p /data/logs/kubernetes/kube-kubelet /data/kubelet
给脚本添加+x权限

$ chmod +x /opt/kubernetes/server/bin/kubelet.sh
2.创建kubelet的启动配置

$ vi /etc/supervisord.d/kube-kubelet.ini
[program:kube-kubelet-7-21]
command=/opt/kubernetes/server/bin/kubelet.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-kubelet/kubelet.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
3.启动并检查

$ supervisorctl update
$ supervisorctl status
etcd-server-7-21 RUNNING pid 4148, uptime 5:20:56
kube-apiserver-7-21 RUNNING pid 4544, uptime 4:15:45
kube-controller-manager-7-21 RUNNING pid 4690, uptime 3:13:41
kube-kubelet-7-21 RUNNING pid 5099, uptime 0:01:33
kube-scheduler-7-21 RUNNING pid 4727, uptime 3:10:16
4.查看节点

给节点打上标签

$ kubectl label node hdss7-22.host.com node-role.kubernetes.io/node=
$ kubectl label node hdss7-22.host.com node-role.kubernetes.io/master=

$ kubectl get nodes
NAME STATUS ROLES AGE VERSION
hdss7-21.host.com Ready master,node 9m56s v1.15.2
hdss7-22.host.com Ready master,node 4m5s v1.15.2
7.2、部署kube-proxy
集群规划

主机名角色 ip
hdss7-21.host.com kubelet 10.4.7.21
hdss7-22.host.com kube-proxy 10.4.7.22
注意：这里部署文档以hdds7-21.host.com主机为例，另外一台运算节点安装部署方法类似

7.2.1、签发kube-proxy证书
运维主机hdss-200.host.com上：

1.创建生成证书签名请求（csr）的json配置文件

$ vim /opt/certs/kube-proxy-csr.json
{

"CN": "system:kube-proxy",
"key": {
    "algo": "rsa",
    "size": 2048
},
"names": [
    {
        "C": "CN",
        "ST": "beijing",
        "L": "beijing",
        "O": "od",
        "OU": "ops"
    }
]

}
2.生成证书和私钥

$ cd /opt/certs
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client kube-proxy-csr.json |cfssl-json -bare kube-proxy-client
2020/01/10 21:12:40 [INFO] generate received request
2020/01/10 21:12:40 [INFO] received CSR
2020/01/10 21:12:40 [INFO] generating key: rsa-2048
2020/01/10 21:12:41 [INFO] encoded CSR
2020/01/10 21:12:41 [INFO] signed certificate with serial number 377857644553048066195455948935822375401500792612
2020/01/10 21:12:41 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for

For more information see the Baseline Requirements for the Issuance and Management
Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

specifically, section 10.2.3 ("Information Requirements").
3.检查证书和私钥

$ ll kube-proxy*
-rw------- 1 root root 1675 Jan 10 21:12 kube-proxy-client-key.pem
-rw-r--r-- 1 root root 1005 Jan 10 21:12 kube-proxy-client.csr
-rw-r--r-- 1 root root 1375 Jan 10 21:12 kube-proxy-client.pem
-rw-r--r-- 1 root root 267 Jan 10 21:12 kube-proxy-csr.json
7.2.2、Kube-proxy配置
hdss7-21.host.com上：

1.拷贝证书到各运算节点，并创建配置（证书、私钥，注意私钥文件权限600）

$ ll
total 40
-rw------- 1 root root 1679 Jan 10 16:32 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Jan 10 16:32 apiserver.pem
-rw------- 1 root root 1675 Jan 10 16:32 ca-key.pem
-rw-r--r-- 1 root root 1346 Jan 10 16:32 ca.pem
-rw------- 1 root root 1679 Jan 10 16:32 client-key.pem
-rw-r--r-- 1 root root 1363 Jan 10 16:32 client.pem
-rw------- 1 root root 1675 Jan 10 21:16 kube-proxy-client-key.pem
-rw-r--r-- 1 root root 1375 Jan 10 21:16 kube-proxy-client.pem
-rw------- 1 root root 1675 Jan 10 20:20 kubelet-key.pem
-rw-r--r-- 1 root root 1468 Jan 10 20:20 kubelet.pem
2.创建kube-proxy配置

进入指定目录

$ cd /opt/kubernetes/server/bin/conf/

$ kubectl config set-cluster myk8s \
--certificate-authority=/opt/kubernetes/server/bin/cert/ca.pem \
--embed-certs=true \
--server=https://10.4.7.10:7443 \
--kubeconfig=kube-proxy.kubeconfig

$ kubectl config set-credentials kube-proxy \
--client-certificate=/opt/kubernetes/server/bin/cert/kube-proxy-client.pem \
--client-key=/opt/kubernetes/server/bin/cert/kube-proxy-client-key.pem \
--embed-certs=true \
--kubeconfig=kube-proxy.kubeconfig

$ kubectl config set-context myk8s-context \
--cluster=myk8s \
--user=kube-proxy \
--kubeconfig=kube-proxy.kubeconfig

$ kubectl config use-context myk8s-context --kubeconfig=kube-proxy.kubeconfig
7.2.3、创建kube-proxy启动脚本
hdss7-21.host.com上：

1.加载ipvs模块

$ vi /root/ipvs.sh

!/bin/bash

ipvs_mods_dir="/usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs"
for i in $(ls $ipvs_mods_dir|grep -o "^¹*")
do
/sbin/modinfo -F filename $i &>/dev/null
if [ $? -eq 0 ];then

/sbin/modprobe $i

fi
done
添加+x权限

$ chmod +x /root/ipvs.sh
执行脚本并检查ip_vs模块是否加载

$ sh /root/ipvs.sh
$ lsmod | grep ip_vs
2.创建启动脚本

$ vim /opt/kubernetes/server/bin/kube-proxy.sh

!/bin/sh

./kube-proxy \
--cluster-cidr 172.7.0.0/16 \
--hostname-override hdss7-21.host.com \
--proxy-mode=ipvs \
--ipvs-scheduler=nq \
--kubeconfig ./conf/kube-proxy.kubeconfig
cluster-cidr：指定docker ip范围

创建日志存放目录

$ mkdir -p /data/logs/kubernetes/kube-proxy
给脚本添加+x权限

$ chmod +x /opt/kubernetes/server/bin/kube-proxy.sh
2.创建kubelet的启动配置

$ vi /etc/supervisord.d/kube-proxy.ini
[program:kube-proxy-7-21]
command=/opt/kubernetes/server/bin/kube-proxy.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at
unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-proxy/proxy.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
killasgroup=true
stopasgroup=true
启动并检查

$ supervisorctl update
$ supervisorctl status
etcd-server-7-21 RUNNING pid 4148, uptime 5:59:11
kube-apiserver-7-21 RUNNING pid 4544, uptime 4:54:00
kube-controller-manager-7-21 RUNNING pid 4690, uptime 3:51:56
kube-kubelet-7-21 RUNNING pid 5099, uptime 0:39:48
kube-proxy-7-21 RUNNING pid 14452, uptime 0:00:45
kube-scheduler-7-21 RUNNING pid 4727, uptime 3:48:31
3.安装ipvs管理工具

$ yum install ipvsadm -y
4.检查ipvs是否成功

$ ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.1:443 nq
-> 10.4.7.21:6443 Masq 1 0 0
-> 10.4.7.22:6443 Masq 1 0 0
8、验证集群
1.在任意一个运算节点，创建一个资源清单

这里我们选hdss7-21.host.com主机

$ vi /root/nginx-ds.yaml
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
name: nginx-ds
spec:
template:

metadata:
  labels:
    app: nginx-ds
spec:
  containers:
  - name: my-nginx
    image: harbor.od.com/public/nginx:v1.7.9
    ports:
    - containerPort: 80

创建资源

$ kubectl create -f /root/nginx-ds.yaml
daemonset.extensions/nginx-ds created
查看pod状态

$ kubctl get pods
NAME READY STATUS RESTARTS AGE
nginx-ds-gl9mg 1/1 Running 0 20s
nginx-ds-mlptx 1/1 Running 0 20s
2.查看集群状态

$ kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-1 Healthy {"health": "true"}
etcd-0 Healthy {"health": "true"}
etcd-2 Healthy {"health": "true"}

$ kubectl get node
NAME STATUS ROLES AGE VERSION
hdss7-21.host.com Ready master,node 48m v1.15.2
hdss7-22.host.com Ready master,node 42m v1.15.2

原文地址https://www.cnblogs.com/jasonminghao/p/12716239.html

. ↩

微信关注我们

原文链接：https://yq.aliyun.com/articles/755942

转载内容版权归作者及来源网站所有！

低调大师中文资讯倾力打造互联网数据资讯、行业资源、电子商务、移动互联网、网络营销平台。持续更新报道IT业界、互联网、市场资讯、驱动更新,是最及时权威的产业资讯及硬件资讯报道平台。

CentOS 7 yum安装 k8s 创建Pod一直处于ContainerCreating状态问题解决

CentOS 7 yum安装 k8s 创建Pod一直处于ContainerCreating状态问题解决阅读目录问题描述本文内容问题分析与解决原因分析与其他方案参考问题描述使用CentOS7的 yum 包管理器安装了 Kubernetes 集群，使用 kubectl 创建服务成功后，执行kubectl get pods，发现AGE虽然在不断增加，但状态始终不变本文内容分析问题原因给出直接解决此问题的方式（不完美）给出其他方案且听我娓娓道来~ 问题分析与解决kubectl 提供了 describe 子命令来输出指定的一个/多个资源的详细信息。执行kubectl describe pod mytomcat-9lcq5，查看问题 Pod 的状态信息，输出如下： [root@kube-master app]# kubectl describe pod mytomcat-9lcq5Name: mytomcat-9lcq5Namespace: defaultNode: kube-node-2/192.168.87.145Start Time: Fri, 17 Apr 2020 15:53:...

2020-04-17

718

MYSQL备份还原问题

用mysql，原有数据库shopdb，想新增一个数据库shopdb2，表结构保持和shopdb一样在ecs服务器上用sqlyog连接rds数据库，创建shopdb2后右键shopdb数据库导出，导出shopdb的表结构保持，然后在shopdb2上右键导入问题来了，shopdb里的数据删除了，因为导出时的语句有use shopdb, 下面每一行前都有drop table....导致shopdb中的每个表都先删除了再重新建立表，但里面的数据都没有了以后切记执行SQL的时候先打开来确认一下！！！！不过数据量导出大的话生成的TXT文本文件好几G啊，根本就打开不了，郁闷！

2020-04-17

529

发表评论

资源下载

更多资源

优质分享App

近一个月的开发和优化，本站点的第一个app全新上线。该app采用极致压缩，本体才4.36MB。系统里面做了大量数据访问、缓存优化。方便用户在手机上查看文章。后续会推出HarmonyOS的适配版本。

Spring

Spring框架（Spring Framework）是由Rod Johnson于2002年提出的开源Java企业级应用框架，旨在通过使用JavaBean替代传统EJB实现方式降低企业级编程开发的复杂性。该框架基于简单性、可测试性和松耦合性设计理念，提供核心容器、应用上下文、数据访问集成等模块，支持整合Hibernate、Struts等第三方框架，其适用范围不仅限于服务器端开发，绝大多数Java应用均可从中受益。

Rocky Linux

Rocky Linux（中文名：洛基）是由Gregory Kurtzer于2020年12月发起的企业级Linux发行版，作为CentOS稳定版停止维护后与RHEL（Red Hat Enterprise Linux）完全兼容的开源替代方案，由社区拥有并管理，支持x86_64、aarch64等架构。其通过重新编译RHEL源代码提供长期稳定性，采用模块化包装和SELinux安全架构，默认包含GNOME桌面环境及XFS文件系统，支持十年生命周期更新。

Sublime Text

Sublime Text具有漂亮的用户界面和强大的功能，例如代码缩略图，Python的插件，代码段等。还可自定义键绑定，菜单和工具栏。Sublime Text 的主要功能包括：拼写检查，书签，完整的 Python API ， Goto 功能，即时项目切换，多选择，多窗口等等。Sublime Text 是一个跨平台的编辑器，同时支持Windows、Linux、Mac OS X等操作系统。

Kubernetes 完整二进制部署(精品)

没有报错说明语法没问题

修改网卡配置文件DNS1

测试ping

Generated by NetworkManager

Ping短域名

等价于

找到nginx image id将其打上new tag

需先登录harbor

然后在推送镜像到私有仓库

!/bin/sh

Don't generate audit events for all requests in RequestReceived stage.

This rule only applies to resources in the "kube-system" namespace.

The empty string "" can be used to select non-namespaced resources.

!/bin/bash

!/bin/bash

keepalived 监控端口脚本

使用方法：

在keepalived的配置文件中

vrrp_script check_port {#创建一个vrrp_script脚本,检查配置

script "/etc/keepalived/check_port.sh 6379" #配置监听的端口

interval 2 #检查脚本的频率,单位（秒）

}

!/bin/sh

!/bin/sh

进入指定目录

指定根证书和api-server的vip

拿客户端密钥和api-server通信

以k8s-node用户去访问api-server（该用户需要授权）

!/bin/sh

给节点打上标签

进入指定目录

!/bin/bash

!/bin/sh

CentOS 7 yum安装 k8s 创建Pod一直处于ContainerCreating状态 问题解决

MYSQL备份还原问题

相关文章

发表评论

资源下载

优质分享App

Spring

Rocky Linux

Sublime Text

欢迎您来访！

CentOS 7 yum安装 k8s 创建Pod一直处于ContainerCreating状态问题解决