1、简要说明

2018年十月 Redis 发布了稳定版本的 5.0 版本，推出了各种新特性，其中一点是放弃 Ruby的集群方式，改为 使用 C语言编写的 redis-cli的方式，是集群的构建方式复杂度大大降低。关于集群的更新可以在 Redis5 的版本说明中看到，如下：

The cluster manager was ported from Ruby (redis-trib.rb) to C code inside redis-cli. check `redis-cli --cluster help ` for more info.

可以查看Redis官网查看集群搭建方式，连接如下

https://redis.io/topics/cluster-tutorial

以下步骤是在一台 Linux 服务器上搭建有6个节点的 Redis集群。

2、创建集群步骤

1、创建目录

        新建目录：/root/software/redis

2、下载源码并解压编译

​wget http://download.redis.io/releases/redis-5.0.0.tar.gz tar xzf redis-5.0.0.tar.gz cd redis-5.0.0 make

3、创建6个Redis配置文件

    6个配置文件不能在同一个目录，此处我们定义如下：

/root/software/redis/redis-cluster-conf/7001/redis.conf /root/software/redis/redis-cluster-conf/7002/redis.conf /root/software/redis/redis-cluster-conf/7003/redis.conf /root/software/redis/redis-cluster-conf/7004/redis.conf /root/software/redis/redis-cluster-conf/7005/redis.conf /root/software/redis/redis-cluster-conf/7006/redis.conf

配置文件的内容为：

port 7001 #端口 cluster-enabled yes #启用集群模式 cluster-config-file nodes.conf cluster-node-timeout 5000 #超时时间 appendonly yes daemonize yes #后台运行 protected-mode no #非保护模式 pidfile /var/run/redis_7001.pid

其中 port 和 pidfile 需要随着 文件夹的不同调增。

4、启动节点

/root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7001/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7002/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7003/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7004/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7005/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7006/redis.conf

5、启动集群

/root/software/redis/redis-5.0.0/src/redis-cli --cluster create 192.168.2.40:7001 192.168.2.40:7002 192.168.2.40:7003 192.168.2.40:7004 192.168.2.40:7005 192.168.2.40:7006 --cluster-replicas 1

启动后，可看到成功信息，如下：

>>> Performing hash slots allocation on 6 nodes... Master[0] -> Slots 0 - 5460 Master[1] -> Slots 5461 - 10922 Master[2] -> Slots 10923 - 16383 Adding replica 192.168.2.40:7004 to 192.168.2.40:7001 Adding replica 192.168.2.40:7005 to 192.168.2.40:7002 Adding replica 192.168.2.40:7006 to 192.168.2.40:7003 >>> Trying to optimize slaves allocation for anti-affinity [WARNING] Some slaves are in the same host as their master M: 191c645200a8b4d267f71e3354c8248dbb533dde 192.168.2.40:7001 slots:[0-5460] (5461 slots) master M: 400a08d4e5a534c1b609988105d3e045395fbd12 192.168.2.40:7002 slots:[5461-10922] (5462 slots) master M: 684f6aa0fbccda295ce6818a8c01ee7255a7b002 192.168.2.40:7003 slots:[10923-16383] (5461 slots) master S: f2701549ae98315b432d73b49d139ee77d5685b4 192.168.2.40:7004 replicates 684f6aa0fbccda295ce6818a8c01ee7255a7b002 S: 9fdc1e375436767ab815cbddd3df674f3bc2ca99 192.168.2.40:7005 replicates 191c645200a8b4d267f71e3354c8248dbb533dde S: e7742888ed85b37cff4a98e861e99bb16e8bae2c 192.168.2.40:7006 replicates 400a08d4e5a534c1b609988105d3e045395fbd12 Can I set the above configuration? (type 'yes' to accept): yes >>> Nodes configuration updated >>> Assign a different config epoch to each node >>> Sending CLUSTER MEET messages to join the cluster Waiting for the cluster to join .... >>> Performing Cluster Check (using node 192.168.2.40:7001) M: 191c645200a8b4d267f71e3354c8248dbb533dde 192.168.2.40:7001 slots:[0-5460] (5461 slots) master 1 additional replica(s) M: 684f6aa0fbccda295ce6818a8c01ee7255a7b002 192.168.2.40:7003 slots:[10923-16383] (5461 slots) master 1 additional replica(s) S: 9fdc1e375436767ab815cbddd3df674f3bc2ca99 192.168.2.40:7005 slots: (0 slots) slave replicates 191c645200a8b4d267f71e3354c8248dbb533dde S: e7742888ed85b37cff4a98e861e99bb16e8bae2c 192.168.2.40:7006 slots: (0 slots) slave replicates 400a08d4e5a534c1b609988105d3e045395fbd12 M: 400a08d4e5a534c1b609988105d3e045395fbd12 192.168.2.40:7002 slots:[5461-10922] (5462 slots) master 1 additional replica(s) S: f2701549ae98315b432d73b49d139ee77d5685b4 192.168.2.40:7004 slots: (0 slots) slave replicates 684f6aa0fbccda295ce6818a8c01ee7255a7b002 [OK] All nodes agree about slots configuration. >>> Check for open slots... >>> Check slots coverage... [OK] All 16384 slots covered.

至此，Reids5 集群搭建完成。

3、集群其他操作

1、关闭集群

    redis5 提供了关闭集群的工具，在如下目录：

/root/software/redis/redis-5.0.0/utils/create-cluster

   打开此文件修改端口为我们自己的，如下所示：

 

端口PROT设置为7000，NODES为6，工具会自动累加1 生成 7001-7006 六个节点 用于操作。

修改后，执行如下命令关闭集群：

/root/software/redis/redis-5.0.0/utils/create-cluster/create-cluster stop

2、重新启动集群

/root/software/redis/redis-5.0.0/utils/create-cluster/create-cluster start

3、使用脚本文件启动集群

#!/bin/sh /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7001/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7002/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7003/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7004/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7005/redis.conf /root/software/redis/redis-5.0.0/src/redis-server /root/software/redis/redis-cluster-conf/7006/redis.conf /root/software/redis/redis-5.0.0/src/redis-cli --cluster create 192.168.2.40:7001 192.168.2.40:7002 192.168.2.40:7003 192.168.2.40:7004 192.168.2.40:7005 192.168.2.40:7006 --cluster-replicas 1

 

以下是 Redis3 集群的操作步骤：

https://www.cnblogs.com/xuliangxing/p/7146868.html

https://www.cnblogs.com/yuanermen/p/5717885.html